Incident Voltage using Reflected Voltage (Load SC) Calculator

✖Reflected Voltage is the voltage that is reflected in the transmission line during transient condition.ⓘ Reflected Voltage [E_r]

+10%

-10%

✖The Incident Voltage on the transmission line is equal to half the generator voltage.ⓘ Incident Voltage using Reflected Voltage (Load SC) [V_i]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Transmission Lines Formula PDF PDF Image

Incident Voltage using Reflected Voltage (Load SC) Solution

STEP 0: Pre-Calculation Summary

Formula Used

Incident Voltage = (-1)*Reflected Voltage
V_i = (-1)*E_r
This formula uses 2 Variables

Variables Used

Incident Voltage - (Measured in Volt) - The Incident Voltage on the transmission line is equal to half the generator voltage.
Reflected Voltage - (Measured in Volt) - Reflected Voltage is the voltage that is reflected in the transmission line during transient condition.

STEP 1: Convert Input(s) to Base Unit

Reflected Voltage: 4.5 Volt --> 4.5 Volt No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V_i = (-1)*E_r --> (-1)*4.5

Evaluating ... ...

V_i = -4.5

STEP 3: Convert Result to Output's Unit

-4.5 Volt --> No Conversion Required

FINAL ANSWER

-4.5 Volt <-- Incident Voltage

(Calculation completed in 00.009 seconds)

You are here -

Home » Engineering » Electrical » Power System » Transmission Lines » Transient » Travelling Waves » Different Cases for Reflection and Transmission » Load Is Short Circuited » Incident Voltage using Reflected Voltage (Load SC)

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Load Is Short Circuited Calculators

Transmitted Voltage (Load SC)

LaTeX Go Transmitted Voltage = Transmitted Current*Characteristic Impedance

Incident Voltage using Reflected Voltage (Load SC)

LaTeX Go Incident Voltage = (-1)*Reflected Voltage

Incident Current using Transmitted Current (Load SC)

LaTeX Go Incident Current = Transmitted Current/2

Transmitted Current (Load SC)

LaTeX Go Transmitted Current = 2*Incident Current

Incident Voltage using Reflected Voltage (Load SC) Formula

LaTeX Go

Incident Voltage = (-1)*Reflected Voltage
V_i = (-1)*E_r

Explain Short-Circuited Load for Travelling Waves.

The unique characteristic of the short circuit is that the voltage across it is zero. When an incident voltage wave E arrives at a short circuit, the reflected voltage wave must be – E to satisfy the condition that the voltage across the short circuit is zero.

How to Calculate Incident Voltage using Reflected Voltage (Load SC)?

Incident Voltage using Reflected Voltage (Load SC) calculator uses Incident Voltage = (-1)*Reflected Voltage to calculate the Incident Voltage, The Incident Voltage using Reflected Voltage (Load SC) formula is defined as the voltage wave that is traveling from the sending end to the receiving end of the Transmission line. Incident Voltage is denoted by V_i symbol.

How to calculate Incident Voltage using Reflected Voltage (Load SC) using this online calculator? To use this online calculator for Incident Voltage using Reflected Voltage (Load SC), enter Reflected Voltage (E_r) and hit the calculate button. Here is how the Incident Voltage using Reflected Voltage (Load SC) calculation can be explained with given input values -> -4.5 = (-1)*4.5.

FAQ

What is Incident Voltage using Reflected Voltage (Load SC)?

The Incident Voltage using Reflected Voltage (Load SC) formula is defined as the voltage wave that is traveling from the sending end to the receiving end of the Transmission line and is represented as V_i = (-1)*E_r or Incident Voltage = (-1)*Reflected Voltage. Reflected Voltage is the voltage that is reflected in the transmission line during transient condition.

How to calculate Incident Voltage using Reflected Voltage (Load SC)?

The Incident Voltage using Reflected Voltage (Load SC) formula is defined as the voltage wave that is traveling from the sending end to the receiving end of the Transmission line is calculated using Incident Voltage = (-1)*Reflected Voltage. To calculate Incident Voltage using Reflected Voltage (Load SC), you need Reflected Voltage (E_r). With our tool, you need to enter the respective value for Reflected Voltage and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search