Incident Voltage using Reflected Voltage (Line OC) Calculator

✖Reflected Voltage is the voltage that is reflected in the transmission line during transient condition.ⓘ Reflected Voltage [E_r]

+10%

-10%

✖The Incident Voltage on the transmission line is equal to half the generator voltage.ⓘ Incident Voltage using Reflected Voltage (Line OC) [V_i]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Transmission Lines Formula PDF PDF Image

Incident Voltage using Reflected Voltage (Line OC) Solution

STEP 0: Pre-Calculation Summary

Formula Used

Incident Voltage = (-1)*Reflected Voltage
V_i = (-1)*E_r
This formula uses 2 Variables

Variables Used

Incident Voltage - (Measured in Volt) - The Incident Voltage on the transmission line is equal to half the generator voltage.
Reflected Voltage - (Measured in Volt) - Reflected Voltage is the voltage that is reflected in the transmission line during transient condition.

STEP 1: Convert Input(s) to Base Unit

Reflected Voltage: 4.5 Volt --> 4.5 Volt No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V_i = (-1)*E_r --> (-1)*4.5

Evaluating ... ...

V_i = -4.5

STEP 3: Convert Result to Output's Unit

-4.5 Volt --> No Conversion Required

FINAL ANSWER

-4.5 Volt <-- Incident Voltage

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Power System » Transmission Lines » Transient » Travelling Waves » Different Cases for Reflection and Transmission » Line Is Open Circuited » Incident Voltage using Reflected Voltage (Line OC)

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< Line Is Open Circuited Calculators

Incident Voltage using Reflected Voltage (Line OC)

LaTeX Go Incident Voltage = (-1)*Reflected Voltage

Incident Current using Transmitted Current (Line OC)

LaTeX Go Incident Current = Transmitted Current/2

Transmitted Current (Line OC)

LaTeX Go Transmitted Current = 2*Incident Current

Incident Voltage using Reflected Voltage (Line OC) Formula

LaTeX Go

Incident Voltage = (-1)*Reflected Voltage
V_i = (-1)*E_r

Explain Open-Circuited Line for Travelling Waves.

An open circuit at the end of a line demands that the current at that point is always zero. Thus when an incident current wave (I) arrives at the open circuit, a reflected wave equal to (– I) is at once initiated to satisfy the boundary condition.

How to Calculate Incident Voltage using Reflected Voltage (Line OC)?

Incident Voltage using Reflected Voltage (Line OC) calculator uses Incident Voltage = (-1)*Reflected Voltage to calculate the Incident Voltage, The Incident Voltage using Reflected Voltage (Line OC) formula is defined as the voltage wave that is traveling from the sending end to the receiving end of the Transmission line. Incident Voltage is denoted by V_i symbol.

How to calculate Incident Voltage using Reflected Voltage (Line OC) using this online calculator? To use this online calculator for Incident Voltage using Reflected Voltage (Line OC), enter Reflected Voltage (E_r) and hit the calculate button. Here is how the Incident Voltage using Reflected Voltage (Line OC) calculation can be explained with given input values -> -4.5 = (-1)*4.5.

FAQ

What is Incident Voltage using Reflected Voltage (Line OC)?

The Incident Voltage using Reflected Voltage (Line OC) formula is defined as the voltage wave that is traveling from the sending end to the receiving end of the Transmission line and is represented as V_i = (-1)*E_r or Incident Voltage = (-1)*Reflected Voltage. Reflected Voltage is the voltage that is reflected in the transmission line during transient condition.

How to calculate Incident Voltage using Reflected Voltage (Line OC)?

The Incident Voltage using Reflected Voltage (Line OC) formula is defined as the voltage wave that is traveling from the sending end to the receiving end of the Transmission line is calculated using Incident Voltage = (-1)*Reflected Voltage. To calculate Incident Voltage using Reflected Voltage (Line OC), you need Reflected Voltage (E_r). With our tool, you need to enter the respective value for Reflected Voltage and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search