Impedance using Capacitive Voltage in Nominal T Method Calculator

✖Capacitive Voltage in T is defined as the voltage of the capacitor in a transmission line.ⓘ Capacitive Voltage in T [V_c(t)]			+10% -10%
✖Receiving End Voltage in T is the voltage developed at the receiving end of a transmission line.ⓘ Receiving End Voltage in T [V_r(t)]			+10% -10%
✖Receiving End Current in T is defined as the magnitude and phase angle of current received at the load end of a medium transmission line.ⓘ Receiving End Current in T [I_r(t)]			+10% -10%

✖Impedance in T is defined as the amount of opposition faced by the direct or alternating current when it passes through a conductor component, circuit.ⓘ Impedance using Capacitive Voltage in Nominal T Method [Z_t]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Nominal T Method in Medium Line Formulas PDF PDF Image

Impedance using Capacitive Voltage in Nominal T Method Solution

STEP 0: Pre-Calculation Summary

Formula Used

Impedance in T = 2*(Capacitive Voltage in T-Receiving End Voltage in T)/Receiving End Current in T
Z_t = 2*(V_c(t)-V_r(t))/I_r(t)
This formula uses 4 Variables

Variables Used

Impedance in T - (Measured in Ohm) - Impedance in T is defined as the amount of opposition faced by the direct or alternating current when it passes through a conductor component, circuit.
Capacitive Voltage in T - (Measured in Volt) - Capacitive Voltage in T is defined as the voltage of the capacitor in a transmission line.
Receiving End Voltage in T - (Measured in Volt) - Receiving End Voltage in T is the voltage developed at the receiving end of a transmission line.
Receiving End Current in T - (Measured in Ampere) - Receiving End Current in T is defined as the magnitude and phase angle of current received at the load end of a medium transmission line.

STEP 1: Convert Input(s) to Base Unit

Capacitive Voltage in T: 387 Volt --> 387 Volt No Conversion Required
Receiving End Voltage in T: 320.2 Volt --> 320.2 Volt No Conversion Required
Receiving End Current in T: 14.72 Ampere --> 14.72 Ampere No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Z_t = 2*(V_c(t)-V_r(t))/I_r(t) --> 2*(387-320.2)/14.72

Evaluating ... ...

Z_t = 9.07608695652174

STEP 3: Convert Result to Output's Unit

9.07608695652174 Ohm --> No Conversion Required

FINAL ANSWER

9.07608695652174 ≈ 9.076087 Ohm <-- Impedance in T

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Power System » Transmission Lines » Medium Line » Nominal T Method in Medium Line » Impedance using Capacitive Voltage in Nominal T Method

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< Nominal T Method in Medium Line Calculators

Receiving End Angle using Sending End Power in Nominal T Method

LaTeX Go Receiving End Phase Angle in T = acos((Sending End Power in T-Power Loss in T)/(Receiving End Voltage in T*Receiving End Current in T*3))

Sending End Current using Losses in Nominal T Method

LaTeX Go Sending End Current in T = sqrt((Power Loss in T/(3/2)*Resistance in T)-(Receiving End Current in T^2))

Capacitive Voltage in Nominal T Method

LaTeX Go Capacitive Voltage in T = Receiving End Voltage in T+(Receiving End Current in T*Impedance in T/2)

Losses in Nominal T Method

LaTeX Go Power Loss in T = 3*(Resistance in T/2)*(Receiving End Current in T^2+Sending End Current in T^2)

Impedance using Capacitive Voltage in Nominal T Method Formula

LaTeX Go

Impedance in T = 2*(Capacitive Voltage in T-Receiving End Voltage in T)/Receiving End Current in T
Z_t = 2*(V_c(t)-V_r(t))/I_r(t)

What is capacitor voltage?

The voltage rating of a capacitor is a measure of how strong its insulation is. A 35V cap can withstand at least 35 volts applied across it (a higher voltage may cause bad things like a short through the cap and burnup).

How to Calculate Impedance using Capacitive Voltage in Nominal T Method?

Impedance using Capacitive Voltage in Nominal T Method calculator uses Impedance in T = 2*(Capacitive Voltage in T-Receiving End Voltage in T)/Receiving End Current in T to calculate the Impedance in T, The Impedance using Capacitive Voltage in Nominal T method formula is defined as a measure of the overall opposition of a circuit to current, in other words: how much the circuit impedes the flow of charge. It is like resistance, but it also takes into account the effects of capacitance and inductance. Impedance is measured in ohms. Impedance in T is denoted by Z_t symbol.

How to calculate Impedance using Capacitive Voltage in Nominal T Method using this online calculator? To use this online calculator for Impedance using Capacitive Voltage in Nominal T Method, enter Capacitive Voltage in T (V_c(t)), Receiving End Voltage in T (V_r(t)) & Receiving End Current in T (I_r(t)) and hit the calculate button. Here is how the Impedance using Capacitive Voltage in Nominal T Method calculation can be explained with given input values -> 9.076087 = 2*(387-320.2)/14.72.

FAQ

What is Impedance using Capacitive Voltage in Nominal T Method?

The Impedance using Capacitive Voltage in Nominal T method formula is defined as a measure of the overall opposition of a circuit to current, in other words: how much the circuit impedes the flow of charge. It is like resistance, but it also takes into account the effects of capacitance and inductance. Impedance is measured in ohms and is represented as Z_t = 2*(V_c(t)-V_r(t))/I_r(t) or Impedance in T = 2*(Capacitive Voltage in T-Receiving End Voltage in T)/Receiving End Current in T. Capacitive Voltage in T is defined as the voltage of the capacitor in a transmission line, Receiving End Voltage in T is the voltage developed at the receiving end of a transmission line & Receiving End Current in T is defined as the magnitude and phase angle of current received at the load end of a medium transmission line.

How to calculate Impedance using Capacitive Voltage in Nominal T Method?

The Impedance using Capacitive Voltage in Nominal T method formula is defined as a measure of the overall opposition of a circuit to current, in other words: how much the circuit impedes the flow of charge. It is like resistance, but it also takes into account the effects of capacitance and inductance. Impedance is measured in ohms is calculated using Impedance in T = 2*(Capacitive Voltage in T-Receiving End Voltage in T)/Receiving End Current in T. To calculate Impedance using Capacitive Voltage in Nominal T Method, you need Capacitive Voltage in T (V_c(t)), Receiving End Voltage in T (V_r(t)) & Receiving End Current in T (I_r(t)). With our tool, you need to enter the respective value for Capacitive Voltage in T, Receiving End Voltage in T & Receiving End Current in T and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Impedance in T?

In this formula, Impedance in T uses Capacitive Voltage in T, Receiving End Voltage in T & Receiving End Current in T. We can use 1 other way(s) to calculate the same, which is/are as follows -

Impedance in T = 2*(A Parameter in T-1)/Admittance in T

Home

FREE PDFs

🔍 Search