Impedance-3 using Transmitted Voltage (Line PL) Solution

STEP 0: Pre-Calculation Summary
Formula Used
Impedance of Tertiary Winding = Transmitted Voltage/Transmitted Current
Z3 = Vt/It
This formula uses 3 Variables
Variables Used
Impedance of Tertiary Winding - (Measured in Ohm) - Impedance of Tertiary Winding in electrical devices, refers to the amount of opposition faced by the direct or alternating current when it passes through a conductor component, circuit, or system.
Transmitted Voltage - (Measured in Volt) - Transmitted Voltage is defined as the Voltage wave that is traveling through the Load of the Transmission line.
Transmitted Current - (Measured in Ampere) - Transmitted Current is defined as the Current wave that is traveling through the Load of the Transmission line.
STEP 1: Convert Input(s) to Base Unit
Transmitted Voltage: 20 Volt --> 20 Volt No Conversion Required
Transmitted Current: 4.8 Ampere --> 4.8 Ampere No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Z3 = Vt/It --> 20/4.8
Evaluating ... ...
Z3 = 4.16666666666667
STEP 3: Convert Result to Output's Unit
4.16666666666667 Ohm --> No Conversion Required
FINAL ANSWER
4.16666666666667 4.166667 Ohm <-- Impedance of Tertiary Winding
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has created this Calculator and 1500+ more calculators!
Verifier Image
Verified by Kethavath Srinath
Osmania University (OU), Hyderabad
Kethavath Srinath has verified this Calculator and 1200+ more calculators!

Impedance 1,2 and 3 Calculators

Impedance-1 using Transmitted Voltage (Line PL)
​ LaTeX ​ Go Impedance of Primary Winding = (Incident Voltage-Reflected Voltage)*(Impedance of Secondary Winding+Impedance of Tertiary Winding)/Transmitted Voltage
Impedance-2 using Transmitted Current-2 (Line PL)
​ LaTeX ​ Go Impedance of Secondary Winding = Transmitted Voltage/Transmitted Current
Impedance-2 using Transmitted Voltage (Line PL)
​ LaTeX ​ Go Impedance of Secondary Winding = Transmitted Voltage/Transmitted Current
Impedance-3 using Transmitted Voltage (Line PL)
​ LaTeX ​ Go Impedance of Tertiary Winding = Transmitted Voltage/Transmitted Current

Impedance-3 using Transmitted Voltage (Line PL) Formula

​LaTeX ​Go
Impedance of Tertiary Winding = Transmitted Voltage/Transmitted Current
Z3 = Vt/It

What is Transmitted Voltage?

Transmitted voltage is defined as the voltage wave that is traveling through the Load of the Transmission line.

How to Calculate Impedance-3 using Transmitted Voltage (Line PL)?

Impedance-3 using Transmitted Voltage (Line PL) calculator uses Impedance of Tertiary Winding = Transmitted Voltage/Transmitted Current to calculate the Impedance of Tertiary Winding, The Impedance-3 using Transmitted Voltage (line PL) formula is defined as a measure of the overall opposition of a circuit to current, in other words: how much the circuit impedes the flow of charge. It is like resistance, but it also takes into account the effects of capacitance and inductance. Impedance is measured in ohms. Impedance of Tertiary Winding is denoted by Z3 symbol.

How to calculate Impedance-3 using Transmitted Voltage (Line PL) using this online calculator? To use this online calculator for Impedance-3 using Transmitted Voltage (Line PL), enter Transmitted Voltage (Vt) & Transmitted Current (It) and hit the calculate button. Here is how the Impedance-3 using Transmitted Voltage (Line PL) calculation can be explained with given input values -> 4.166667 = 20/4.8.

FAQ

What is Impedance-3 using Transmitted Voltage (Line PL)?
The Impedance-3 using Transmitted Voltage (line PL) formula is defined as a measure of the overall opposition of a circuit to current, in other words: how much the circuit impedes the flow of charge. It is like resistance, but it also takes into account the effects of capacitance and inductance. Impedance is measured in ohms and is represented as Z3 = Vt/It or Impedance of Tertiary Winding = Transmitted Voltage/Transmitted Current. Transmitted Voltage is defined as the Voltage wave that is traveling through the Load of the Transmission line & Transmitted Current is defined as the Current wave that is traveling through the Load of the Transmission line.
How to calculate Impedance-3 using Transmitted Voltage (Line PL)?
The Impedance-3 using Transmitted Voltage (line PL) formula is defined as a measure of the overall opposition of a circuit to current, in other words: how much the circuit impedes the flow of charge. It is like resistance, but it also takes into account the effects of capacitance and inductance. Impedance is measured in ohms is calculated using Impedance of Tertiary Winding = Transmitted Voltage/Transmitted Current. To calculate Impedance-3 using Transmitted Voltage (Line PL), you need Transmitted Voltage (Vt) & Transmitted Current (It). With our tool, you need to enter the respective value for Transmitted Voltage & Transmitted Current and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Impedance of Tertiary Winding?
In this formula, Impedance of Tertiary Winding uses Transmitted Voltage & Transmitted Current. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Impedance of Tertiary Winding = (2/(Impedance of Primary Winding*Transmission Coefficient of Voltage))-(1/Impedance of Primary Winding)-(1/Impedance of Secondary Winding)
  • Impedance of Tertiary Winding = Transmitted Voltage*Impedance of Primary Winding/(Incident Voltage*Transmission Coefficient of Current)
  • Impedance of Tertiary Winding = Transmission Coefficient of Voltage*Impedance of Primary Winding/Transmission Coefficient of Current
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!