Inlet-Valve Mach Index Calculator

✖Cylinder Diameter is the diameter of the cylinder of an engine.ⓘ Cylinder Diameter [D_c]			+10% -10%
✖Inlet Valve Diameter is the diameter of the inlet valve of the engine through which the fuel-air mixture is drawn into the cylinder.ⓘ Inlet Valve Diameter [D_i]			+10% -10%
✖Mean Piston Speed is the average speed of the piston over one engine revolution.ⓘ Mean Piston Speed [s_p]			+10% -10%
✖The Flow Coefficient is a relative measure of the efficiency at allowing fluid flow.ⓘ Flow Coefficient [q_f]			+10% -10%
✖Sonic Velocity is speed of sound is the distance travelled per unit of time by a sound wave as it propagates through an elastic medium.ⓘ Sonic Velocity [a]			+10% -10%

✖Mach Index is the ratio of the velocity of the gases flow area to the speed of sound. In engines, it is a mathematical expression of the inlet velocity, relative to the speed of sound.ⓘ Inlet-Valve Mach Index [Z]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Important Formulas of Engine Dynamics Formulas PDF PDF Image

Inlet-Valve Mach Index Solution

STEP 0: Pre-Calculation Summary

Formula Used

Mach Index = ((Cylinder Diameter/Inlet Valve Diameter)^2)*((Mean Piston Speed)/(Flow Coefficient*Sonic Velocity))
Z = ((D_c/D_i)^2)*((s_p)/(q_f*a))
This formula uses 6 Variables

Variables Used

Mach Index - Mach Index is the ratio of the velocity of the gases flow area to the speed of sound. In engines, it is a mathematical expression of the inlet velocity, relative to the speed of sound.
Cylinder Diameter - (Measured in Meter) - Cylinder Diameter is the diameter of the cylinder of an engine.
Inlet Valve Diameter - (Measured in Meter) - Inlet Valve Diameter is the diameter of the inlet valve of the engine through which the fuel-air mixture is drawn into the cylinder.
Mean Piston Speed - (Measured in Meter per Second) - Mean Piston Speed is the average speed of the piston over one engine revolution.
Flow Coefficient - The Flow Coefficient is a relative measure of the efficiency at allowing fluid flow.
Sonic Velocity - (Measured in Meter per Second) - Sonic Velocity is speed of sound is the distance travelled per unit of time by a sound wave as it propagates through an elastic medium.

STEP 1: Convert Input(s) to Base Unit

Cylinder Diameter: 85 Centimeter --> 0.85 Meter (Check conversion here)
Inlet Valve Diameter: 2 Centimeter --> 0.02 Meter (Check conversion here)
Mean Piston Speed: 73.72 Meter per Second --> 73.72 Meter per Second No Conversion Required
Flow Coefficient: 11.8 --> No Conversion Required
Sonic Velocity: 340 Centimeter per Second --> 3.4 Meter per Second (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Z = ((D_c/D_i)^2)*((s_p)/(q_f*a)) --> ((0.85/0.02)^2)*((73.72)/(11.8*3.4))

Evaluating ... ...

Z = 3318.96186440678

STEP 3: Convert Result to Output's Unit

3318.96186440678 --> No Conversion Required

FINAL ANSWER

3318.96186440678 ≈ 3318.962 <-- Mach Index

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » IC Engine » Engine Performance Parameters » Engine Dynamics » Mechanical » Important Formulas of Engine Dynamics » Inlet-Valve Mach Index

Credits

Created by Aditya Prakash Gautam

Indian Institute of Technology (IIT (ISM) ), Dhanbad, Jharkhand

Aditya Prakash Gautam has created this Calculator and 25+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Important Formulas of Engine Dynamics Calculators

Brake Power given Mean Effective Pressure

LaTeX Go Brake Power = (Brake Mean Effective Pressure*Stroke Length*Area of Cross Section*(Engine Speed))

Beale Number

LaTeX Go Beale Number = Engine Power/(Average Gas Pressure*Piston Swept Volume*Engine Frequency)

Brake specific fuel consumption

LaTeX Go Brake Specific Fuel Consumption = Fuel Consumption in IC engine/Brake Power

Brake Power given Mechanical Efficiency

LaTeX Go Brake Power = (Mechanical Efficiency/100)*Indicated Power

< Characteristics and Operational Metrics Calculators

Beale Number

LaTeX Go Beale Number = Engine Power/(Average Gas Pressure*Piston Swept Volume*Engine Frequency)

Swept Volume

LaTeX Go Swept Volume = (((pi/4)*Inner Diameter of Cylinder^2)*Stroke Length)

Mean piston speed

LaTeX Go Mean Piston Speed = 2*Stroke Length*Engine Speed

Friction Power

LaTeX Go Friction Power = Indicated Power-Brake Power

Inlet-Valve Mach Index Formula

LaTeX Go

Mach Index = ((Cylinder Diameter/Inlet Valve Diameter)^2)*((Mean Piston Speed)/(Flow Coefficient*Sonic Velocity))
Z = ((D_c/D_i)^2)*((s_p)/(q_f*a))

What is the effect of high mach index on the inlet valve closing ?

At high Mach Index Values the cylinder pressure may be well below inlet pressure at Bottom Dead Center. In this case, delaying the inlet valve closing allows more flow into the cylinder up to the time when the inlet and cylinder pressures reach equality. Thus, the higher the value of the Mach Index, the later the inlet valve should be closed to increase, or maintain volumetric efficiency.

How to Calculate Inlet-Valve Mach Index?

Inlet-Valve Mach Index calculator uses Mach Index = ((Cylinder Diameter/Inlet Valve Diameter)^2)*((Mean Piston Speed)/(Flow Coefficient*Sonic Velocity)) to calculate the Mach Index, The Inlet-Valve Mach Index formula is defined as ratio of gas velocity through the inlet valve at the smallest flow area to the inlet sonic velocity. Mach Index is denoted by Z symbol.

How to calculate Inlet-Valve Mach Index using this online calculator? To use this online calculator for Inlet-Valve Mach Index, enter Cylinder Diameter (D_c), Inlet Valve Diameter (D_i), Mean Piston Speed (s_p), Flow Coefficient (q_f) & Sonic Velocity (a) and hit the calculate button. Here is how the Inlet-Valve Mach Index calculation can be explained with given input values -> 3318.962 = ((0.85/0.02)^2)*((73.72)/(11.8*3.4)).

FAQ

What is Inlet-Valve Mach Index?

The Inlet-Valve Mach Index formula is defined as ratio of gas velocity through the inlet valve at the smallest flow area to the inlet sonic velocity and is represented as Z = ((D_c/D_i)^2)*((s_p)/(q_f*a)) or Mach Index = ((Cylinder Diameter/Inlet Valve Diameter)^2)*((Mean Piston Speed)/(Flow Coefficient*Sonic Velocity)). Cylinder Diameter is the diameter of the cylinder of an engine, Inlet Valve Diameter is the diameter of the inlet valve of the engine through which the fuel-air mixture is drawn into the cylinder, Mean Piston Speed is the average speed of the piston over one engine revolution, The Flow Coefficient is a relative measure of the efficiency at allowing fluid flow & Sonic Velocity is speed of sound is the distance travelled per unit of time by a sound wave as it propagates through an elastic medium.

How to calculate Inlet-Valve Mach Index?

The Inlet-Valve Mach Index formula is defined as ratio of gas velocity through the inlet valve at the smallest flow area to the inlet sonic velocity is calculated using Mach Index = ((Cylinder Diameter/Inlet Valve Diameter)^2)*((Mean Piston Speed)/(Flow Coefficient*Sonic Velocity)). To calculate Inlet-Valve Mach Index, you need Cylinder Diameter (D_c), Inlet Valve Diameter (D_i), Mean Piston Speed (s_p), Flow Coefficient (q_f) & Sonic Velocity (a). With our tool, you need to enter the respective value for Cylinder Diameter, Inlet Valve Diameter, Mean Piston Speed, Flow Coefficient & Sonic Velocity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search