Ideal Work using Thermodynamic Efficiency and Condition is Work is Produced Calculator

✖Actual Work Done in Thermodynamic Process is defined as the work done by the system or on the system considering all conditions.ⓘ Actual Work Done in Thermodynamic Process [W_Actual]			+10% -10%
✖Thermodynamic Efficiency is defined as the ratio of desired output to required input.ⓘ Thermodynamic Efficiency [η_t]			+10% -10%

✖Ideal Work Condition Work is Produced is defined as the maximum work obtained when the processes are mechanically reversible.ⓘ Ideal Work using Thermodynamic Efficiency and Condition is Work is Produced [W_ideal1]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Chemical Engineering Formula PDF PDF Image

Ideal Work using Thermodynamic Efficiency and Condition is Work is Produced Solution

STEP 0: Pre-Calculation Summary

Formula Used

Ideal Work Condition Work is Produced = Actual Work Done in Thermodynamic Process/Thermodynamic Efficiency
W_ideal1 = W_Actual/η_t
This formula uses 3 Variables

Variables Used

Ideal Work Condition Work is Produced - (Measured in Joule) - Ideal Work Condition Work is Produced is defined as the maximum work obtained when the processes are mechanically reversible.
Actual Work Done in Thermodynamic Process - (Measured in Joule) - Actual Work Done in Thermodynamic Process is defined as the work done by the system or on the system considering all conditions.
Thermodynamic Efficiency - Thermodynamic Efficiency is defined as the ratio of desired output to required input.

STEP 1: Convert Input(s) to Base Unit

Actual Work Done in Thermodynamic Process: 210 Joule --> 210 Joule No Conversion Required
Thermodynamic Efficiency: 0.55 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

W_ideal1 = W_Actual/η_t --> 210/0.55

Evaluating ... ...

W_ideal1 = 381.818181818182

STEP 3: Convert Result to Output's Unit

381.818181818182 Joule --> No Conversion Required

FINAL ANSWER

381.818181818182 ≈ 381.8182 Joule <-- Ideal Work Condition Work is Produced

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Chemical Engineering » Thermodynamics » Laws of Thermodynamics their Applications and other Basic Concepts » Ideal Work using Thermodynamic Efficiency and Condition is Work is Produced

Credits

Created by Shivam Sinha

National Institute Of Technology (NIT), Surathkal

Shivam Sinha has created this Calculator and 300+ more calculators!

Verified by Pragati Jaju

College Of Engineering (COEP), Pune

Pragati Jaju has verified this Calculator and 300+ more calculators!

< Laws of Thermodynamics their Applications and other Basic Concepts Calculators

Internal Energy using First Law of Thermodynamics

LaTeX Go Change in Internal Energy = Heat Transferred in Thermodynamic Process+Work done in Thermodynamic Process

Work using First Law of Thermodynamics

LaTeX Go Work done in Thermodynamic Process = Change in Internal Energy-Heat Transferred in Thermodynamic Process

Heat using First Law of Thermodynamics

LaTeX Go Heat Transferred in Thermodynamic Process = Change in Internal Energy-Work done in Thermodynamic Process

Turbine Efficiency using Actual and Isentropic Change in Enthalpy

LaTeX Go Turbine Efficiency = Change in Enthalpy in a Thermodynamic Process/Change in Enthalpy (Isentropic)

Ideal Work using Thermodynamic Efficiency and Condition is Work is Produced Formula

LaTeX Go

Ideal Work Condition Work is Produced = Actual Work Done in Thermodynamic Process/Thermodynamic Efficiency
W_ideal1 = W_Actual/η_t

Define Thermodynamic Efficiency.

Thermodynamic efficiency is defined as the ratio of work output to heat-energy input in a heat-engine cycle or of heat energy removal to work input in a refrigeration cycle. In thermodynamics, thermal efficiency is a dimensionless performance measure of a device that uses thermal energy, such as an internal combustion engine, a steam turbine or a steam engine, a boiler, furnace, or a refrigerator for example. For a heat engine, thermal efficiency is the fraction of the energy added by heat (primary energy) that is converted to net work output (secondary energy). In the case of a refrigeration or heat pump cycle, thermal efficiency is the ratio of net heat output for heating, or removal for cooling, to energy input (the coefficient of performance).

What is First Law of Thermodynamics?

In a closed system undergoing a thermodynamic cycle, cyclic integral of heat and cyclic integral of work are proportional to each other when expressed in their own units and are equal to each other when expressed in the consistent(same) units.

How to Calculate Ideal Work using Thermodynamic Efficiency and Condition is Work is Produced?

Ideal Work using Thermodynamic Efficiency and Condition is Work is Produced calculator uses Ideal Work Condition Work is Produced = Actual Work Done in Thermodynamic Process/Thermodynamic Efficiency to calculate the Ideal Work Condition Work is Produced, The Ideal Work using Thermodynamic Efficiency and Condition is Work is Produced formula is defined as ratio of actual work to thermodynamic efficiency when condition is work is produced. Ideal Work Condition Work is Produced is denoted by W_ideal1 symbol.

How to calculate Ideal Work using Thermodynamic Efficiency and Condition is Work is Produced using this online calculator? To use this online calculator for Ideal Work using Thermodynamic Efficiency and Condition is Work is Produced, enter Actual Work Done in Thermodynamic Process (W_Actual) & Thermodynamic Efficiency (η_t) and hit the calculate button. Here is how the Ideal Work using Thermodynamic Efficiency and Condition is Work is Produced calculation can be explained with given input values -> 381.8182 = 210/0.55.

FAQ

What is Ideal Work using Thermodynamic Efficiency and Condition is Work is Produced?

The Ideal Work using Thermodynamic Efficiency and Condition is Work is Produced formula is defined as ratio of actual work to thermodynamic efficiency when condition is work is produced and is represented as W_ideal1 = W_Actual/η_t or Ideal Work Condition Work is Produced = Actual Work Done in Thermodynamic Process/Thermodynamic Efficiency. Actual Work Done in Thermodynamic Process is defined as the work done by the system or on the system considering all conditions & Thermodynamic Efficiency is defined as the ratio of desired output to required input.

How to calculate Ideal Work using Thermodynamic Efficiency and Condition is Work is Produced?

The Ideal Work using Thermodynamic Efficiency and Condition is Work is Produced formula is defined as ratio of actual work to thermodynamic efficiency when condition is work is produced is calculated using Ideal Work Condition Work is Produced = Actual Work Done in Thermodynamic Process/Thermodynamic Efficiency. To calculate Ideal Work using Thermodynamic Efficiency and Condition is Work is Produced, you need Actual Work Done in Thermodynamic Process (W_Actual) & Thermodynamic Efficiency (η_t). With our tool, you need to enter the respective value for Actual Work Done in Thermodynamic Process & Thermodynamic Efficiency and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search