Ideal wire diameter in three wire system method Calculator

✖Screw Pitch is the distance between screw threads and is commonly used with inch sized products and specified as threads per inch.ⓘ Screw Pitch [P]			+10% -10%
✖Thread angle of a screw is the included angle between the thread flanks, measured in a plane containing the thread axis.ⓘ Thread Angle [θ]			+10% -10%

✖Wire Diameter Metric Thread is any straight line segment that passes through the center of the wire circle and whose endpoints lie on the wire circle in the metric measurement system.ⓘ Ideal wire diameter in three wire system method [G_m]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Thread Measurement Formulas PDF PDF Image

Ideal wire diameter in three wire system method Solution

STEP 0: Pre-Calculation Summary

Formula Used

Wire Diameter Metric Thread = (Screw Pitch/2)*sec(Thread Angle/2)
G_m = (P/2)*sec(θ/2)
This formula uses 1 Functions, 3 Variables

Functions Used

sec - Secant is a trigonometric function that is defined ratio of the hypotenuse to the shorter side adjacent to an acute angle (in a right-angled triangle); the reciprocal of a cosine., sec(Angle)

Variables Used

Wire Diameter Metric Thread - (Measured in Meter) - Wire Diameter Metric Thread is any straight line segment that passes through the center of the wire circle and whose endpoints lie on the wire circle in the metric measurement system.
Screw Pitch - (Measured in Meter) - Screw Pitch is the distance between screw threads and is commonly used with inch sized products and specified as threads per inch.
Thread Angle - (Measured in Radian) - Thread angle of a screw is the included angle between the thread flanks, measured in a plane containing the thread axis.

STEP 1: Convert Input(s) to Base Unit

Screw Pitch: 3 Millimeter --> 0.003 Meter (Check conversion here)
Thread Angle: 60 Degree --> 1.0471975511964 Radian (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

G_m = (P/2)*sec(θ/2) --> (0.003/2)*sec(1.0471975511964/2)

Evaluating ... ...

G_m = 0.00173205080756888

STEP 3: Convert Result to Output's Unit

0.00173205080756888 Meter -->1.73205080756888 Millimeter (Check conversion here)

FINAL ANSWER

1.73205080756888 ≈ 1.732051 Millimeter <-- Wire Diameter Metric Thread

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Metrology » Thread Measurement » Three Wires System Method » Metric Thread » Ideal wire diameter in three wire system method

Credits

Created by Rajat Vishwakarma

University Institute of Technology RGPV (UIT - RGPV), Bhopal

Rajat Vishwakarma has created this Calculator and 400+ more calculators!

Verified by Sai Venkata Phanindra Chary Arendra

Vallurupalli Nageswara Rao Vignana Jyothi Institute of Engineering and Technology (VNRVJIET), Hyderabad

Sai Venkata Phanindra Chary Arendra has verified this Calculator and 300+ more calculators!

< Metric Thread Calculators

Diameter of Wire used in Three Wire System Method

LaTeX Go Wire Diameter Metric Thread = (Micrometer Reading-Pitch Diameter+(Screw Pitch*cot(Thread Angle))/2)/(1+cosec(Thread Angle))

Pitch diameter from three wire system method

LaTeX Go Pitch Diameter = Micrometer Reading-(Wire Diameter Metric Thread*(1+cosec(Thread Angle))-(Screw Pitch*cot(Thread Angle))/2)

Micrometer reading from three wire system method

LaTeX Go Micrometer Reading = Pitch Diameter+Wire Diameter Metric Thread*(1+cosec(Thread Angle))-(Screw Pitch*cot(Thread Angle))/2

Ideal wire diameter in three wire system method

LaTeX Go Wire Diameter Metric Thread = (Screw Pitch/2)*sec(Thread Angle/2)

Ideal wire diameter in three wire system method Formula

LaTeX Go

Wire Diameter Metric Thread = (Screw Pitch/2)*sec(Thread Angle/2)
G_m = (P/2)*sec(θ/2)

What is pitch? What is pitch diameter?

Pitch is the distance from a point on the screw thread to a corresponding point on the next thread measured parallel to the axis. Pitch Diameter is the simple effective diameter of the screw thread, approximately halfway between the major and minor diameters.

How to Calculate Ideal wire diameter in three wire system method?

Ideal wire diameter in three wire system method calculator uses Wire Diameter Metric Thread = (Screw Pitch/2)*sec(Thread Angle/2) to calculate the Wire Diameter Metric Thread, The Ideal wire diameter in three wire system method formula is defined as the specific diameter of the wires used to accurately measure the pitch diameter of a thread. This diameter ensures that the wires contact the thread flanks at the correct points, providing a precise measurement of the effective pitch diameter, which is crucial for determining the fit and function of threaded connections. Wire Diameter Metric Thread is denoted by G_m symbol.

How to calculate Ideal wire diameter in three wire system method using this online calculator? To use this online calculator for Ideal wire diameter in three wire system method, enter Screw Pitch (P) & Thread Angle (θ) and hit the calculate button. Here is how the Ideal wire diameter in three wire system method calculation can be explained with given input values -> 1749.95 = (0.003/2)*sec(1.0471975511964/2).

FAQ

What is Ideal wire diameter in three wire system method?

The Ideal wire diameter in three wire system method formula is defined as the specific diameter of the wires used to accurately measure the pitch diameter of a thread. This diameter ensures that the wires contact the thread flanks at the correct points, providing a precise measurement of the effective pitch diameter, which is crucial for determining the fit and function of threaded connections and is represented as G_m = (P/2)*sec(θ/2) or Wire Diameter Metric Thread = (Screw Pitch/2)*sec(Thread Angle/2). Screw Pitch is the distance between screw threads and is commonly used with inch sized products and specified as threads per inch & Thread angle of a screw is the included angle between the thread flanks, measured in a plane containing the thread axis.

How to calculate Ideal wire diameter in three wire system method?

The Ideal wire diameter in three wire system method formula is defined as the specific diameter of the wires used to accurately measure the pitch diameter of a thread. This diameter ensures that the wires contact the thread flanks at the correct points, providing a precise measurement of the effective pitch diameter, which is crucial for determining the fit and function of threaded connections is calculated using Wire Diameter Metric Thread = (Screw Pitch/2)*sec(Thread Angle/2). To calculate Ideal wire diameter in three wire system method, you need Screw Pitch (P) & Thread Angle (θ). With our tool, you need to enter the respective value for Screw Pitch & Thread Angle and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Wire Diameter Metric Thread?

In this formula, Wire Diameter Metric Thread uses Screw Pitch & Thread Angle. We can use 1 other way(s) to calculate the same, which is/are as follows -

Wire Diameter Metric Thread = (Micrometer Reading-Pitch Diameter+(Screw Pitch*cot(Thread Angle))/2)/(1+cosec(Thread Angle))

Home

FREE PDFs

🔍 Search