LCM calculator

Hydraulic Mean Depth given Flow Velocity by William Hazen's Formula Calculator

Engineering Chemistry Financial Health More >>

↳

Civil Chemical Engineering Electrical Electronics More >>

⤿

Environmental Engineering Bridge and Suspension Cable Coastal and Ocean Engineering Columns More >>

⤿

Hydraulic Designs of Sewers and S. W. Drain Sections Conveyance of Water Design of a Chlorination System for Wastewater Disinfection Design of a Circular Settling Tank More >>

⤿

Flow Velocity in Sewers and Drains Design of Storm Water Drains Egg Shaped Sewers and Hydraulically Equivalent Sections Hydraulic Characteristics of Circular Sewers Sections More >>

⤿

William Hazen's Formula Bazin's Formula Chezy's Formula Crimp and Burge's Formula More >>

✖Flow Velocity for William Hazen's Formula refers to the speed at which fluid moves through a channel or pipe, typically measured in meters per second (m/s) or feet per second (ft/s).ⓘ Flow Velocity for William Hazen's Formula [V_wh]			+10% -10%
✖William Hazen Coefficient refers to an empirical factor used in hydraulic formulas to calculate flow velocity, accounting for pipe roughness and diameter.ⓘ William Hazen Coefficient [C_H]			+10% -10%
✖Bed Slope of Channel refers to the gradient or incline of a channel's bed, influencing the velocity and direction of water flow, typically measured as a ratio or percentage.ⓘ Bed Slope of Channel [s]			+10% -10%

✖The Hydraulic Mean Depth refers to the cross-sectional area of flow divided by the wetted perimeter, used to analyze fluid flow in channels.ⓘ Hydraulic Mean Depth given Flow Velocity by William Hazen's Formula [m]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Flow Velocity in Sewers and Drains Formulas PDF PDF Image

Hydraulic Mean Depth given Flow Velocity by William Hazen's Formula Solution

STEP 0: Pre-Calculation Summary

Formula Used

Hydraulic Mean Depth = (Flow Velocity for William Hazen's Formula/(0.85*William Hazen Coefficient*(Bed Slope of Channel)^(0.54)))^(1/0.63)
m = (V_wh/(0.85*C_H*(s)^(0.54)))^(1/0.63)
This formula uses 4 Variables

Variables Used

Hydraulic Mean Depth - (Measured in Meter) - The Hydraulic Mean Depth refers to the cross-sectional area of flow divided by the wetted perimeter, used to analyze fluid flow in channels.
Flow Velocity for William Hazen's Formula - (Measured in Meter per Second) - Flow Velocity for William Hazen's Formula refers to the speed at which fluid moves through a channel or pipe, typically measured in meters per second (m/s) or feet per second (ft/s).
William Hazen Coefficient - William Hazen Coefficient refers to an empirical factor used in hydraulic formulas to calculate flow velocity, accounting for pipe roughness and diameter.
Bed Slope of Channel - Bed Slope of Channel refers to the gradient or incline of a channel's bed, influencing the velocity and direction of water flow, typically measured as a ratio or percentage.

STEP 1: Convert Input(s) to Base Unit

Flow Velocity for William Hazen's Formula: 10.43 Meter per Second --> 10.43 Meter per Second No Conversion Required
William Hazen Coefficient: 119.91 --> No Conversion Required
Bed Slope of Channel: 0.001 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

m = (V_wh/(0.85*C_H*(s)^(0.54)))^(1/0.63) --> (10.43/(0.85*119.91*(0.001)^(0.54)))^(1/0.63)

Evaluating ... ...

m = 10.0003647555922

STEP 3: Convert Result to Output's Unit

10.0003647555922 Meter --> No Conversion Required

FINAL ANSWER

10.0003647555922 ≈ 10.00036 Meter <-- Hydraulic Mean Depth

(Calculation completed in 00.006 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Hydraulic Designs of Sewers and S. W. Drain Sections » Flow Velocity in Sewers and Drains » William Hazen's Formula » Hydraulic Mean Depth given Flow Velocity by William Hazen's Formula

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< William Hazen's Formula Calculators

William Hazen Coefficient given Flow Velocity by William Hazen's Formula

LaTeX Go William Hazen Coefficient = (Flow Velocity for William Hazen's Formula/(0.85*(Hydraulic Mean Depth)^(0.63)*(Bed Slope of Channel)^(0.54)))

Hydraulic Mean Depth given Flow Velocity by William Hazen's Formula

LaTeX Go Hydraulic Mean Depth = (Flow Velocity for William Hazen's Formula/(0.85*William Hazen Coefficient*(Bed Slope of Channel)^(0.54)))^(1/0.63)

Bed Slope of Sewer given Flow Velocity by William Hazen's Formula

LaTeX Go Bed Slope of Channel = (Flow Velocity for William Hazen's Formula/(0.85*(Hydraulic Mean Depth)^(0.63)*William Hazen Coefficient))^(1/0.54)

Flow Velocity by William Hazen's Formula

LaTeX Go Flow Velocity for William Hazen's Formula = 0.85*William Hazen Coefficient*(Hydraulic Mean Depth)^(0.63)*(Bed Slope of Channel)^(0.54)

Hydraulic Mean Depth given Flow Velocity by William Hazen's Formula Formula

LaTeX Go

Hydraulic Mean Depth = (Flow Velocity for William Hazen's Formula/(0.85*William Hazen Coefficient*(Bed Slope of Channel)^(0.54)))^(1/0.63)
m = (V_wh/(0.85*C_H*(s)^(0.54)))^(1/0.63)

What is William Hazen coefficient ?

The William Hazen coefficient is an empirical factor used in hydraulic formulas to calculate flow velocity, accounting for pipe roughness and diameter.

How to Calculate Hydraulic Mean Depth given Flow Velocity by William Hazen's Formula?

Hydraulic Mean Depth given Flow Velocity by William Hazen's Formula calculator uses Hydraulic Mean Depth = (Flow Velocity for William Hazen's Formula/(0.85*William Hazen Coefficient*(Bed Slope of Channel)^(0.54)))^(1/0.63) to calculate the Hydraulic Mean Depth, The Hydraulic Mean Depth given Flow Velocity by William Hazen's Formula is defined as the cross-sectional area of the flow in a channel, which is used to calculate the hydraulic radius by dividing it by the wetted perimeter. Hydraulic Mean Depth is denoted by m symbol.

How to calculate Hydraulic Mean Depth given Flow Velocity by William Hazen's Formula using this online calculator? To use this online calculator for Hydraulic Mean Depth given Flow Velocity by William Hazen's Formula, enter Flow Velocity for William Hazen's Formula (V_wh), William Hazen Coefficient (C_H) & Bed Slope of Channel (s) and hit the calculate button. Here is how the Hydraulic Mean Depth given Flow Velocity by William Hazen's Formula calculation can be explained with given input values -> 9.988462 = (10.43/(0.85*119.91*(0.001)^(0.54)))^(1/0.63).

FAQ

What is Hydraulic Mean Depth given Flow Velocity by William Hazen's Formula?

The Hydraulic Mean Depth given Flow Velocity by William Hazen's Formula is defined as the cross-sectional area of the flow in a channel, which is used to calculate the hydraulic radius by dividing it by the wetted perimeter and is represented as m = (V_wh/(0.85*C_H*(s)^(0.54)))^(1/0.63) or Hydraulic Mean Depth = (Flow Velocity for William Hazen's Formula/(0.85*William Hazen Coefficient*(Bed Slope of Channel)^(0.54)))^(1/0.63). Flow Velocity for William Hazen's Formula refers to the speed at which fluid moves through a channel or pipe, typically measured in meters per second (m/s) or feet per second (ft/s), William Hazen Coefficient refers to an empirical factor used in hydraulic formulas to calculate flow velocity, accounting for pipe roughness and diameter & Bed Slope of Channel refers to the gradient or incline of a channel's bed, influencing the velocity and direction of water flow, typically measured as a ratio or percentage.

How to calculate Hydraulic Mean Depth given Flow Velocity by William Hazen's Formula?

The Hydraulic Mean Depth given Flow Velocity by William Hazen's Formula is defined as the cross-sectional area of the flow in a channel, which is used to calculate the hydraulic radius by dividing it by the wetted perimeter is calculated using Hydraulic Mean Depth = (Flow Velocity for William Hazen's Formula/(0.85*William Hazen Coefficient*(Bed Slope of Channel)^(0.54)))^(1/0.63). To calculate Hydraulic Mean Depth given Flow Velocity by William Hazen's Formula, you need Flow Velocity for William Hazen's Formula (V_wh), William Hazen Coefficient (C_H) & Bed Slope of Channel (s). With our tool, you need to enter the respective value for Flow Velocity for William Hazen's Formula, William Hazen Coefficient & Bed Slope of Channel and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search