Horsepower given Quantity of Oil Calculator

✖Quantity of Oil is the amount of oil or lubricating oil that is needed as fuel for machines.ⓘ Quantity of Oil [Q]			+10% -10%
✖Crankcase capacity is the housing for the crankshaft in a reciprocating internal combustion engine.ⓘ Crankcase Capacity [C]			+10% -10%
✖The Time between Change of Oil here refers to the time taken or the number of hours taken between the change of oil.ⓘ Time between Change of Oil [t]			+10% -10%
✖Operating Factor is the ratio of time worked to reference time.ⓘ Operating Factor [η]			+10% -10%

✖Engine power is the power that the engine can put out.ⓘ Horsepower given Quantity of Oil [HP]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Construction Management Formulas PDF PDF Image

Horsepower given Quantity of Oil Solution

STEP 0: Pre-Calculation Summary

Formula Used

Engine power = (Quantity of Oil-(Crankcase Capacity/(5*Time between Change of Oil)))*(0.74/(0.0027*Operating Factor))
HP = (Q-(C/(5*t)))*(0.74/(0.0027*η))
This formula uses 5 Variables

Variables Used

Engine power - (Measured in Horsepower) - Engine power is the power that the engine can put out.
Quantity of Oil - (Measured in Liter per hour) - Quantity of Oil is the amount of oil or lubricating oil that is needed as fuel for machines.
Crankcase Capacity - (Measured in Liter) - Crankcase capacity is the housing for the crankshaft in a reciprocating internal combustion engine.
Time between Change of Oil - (Measured in Hour) - The Time between Change of Oil here refers to the time taken or the number of hours taken between the change of oil.
Operating Factor - Operating Factor is the ratio of time worked to reference time.

STEP 1: Convert Input(s) to Base Unit

Quantity of Oil: 0.41 Liter per hour --> 0.41 Liter per hour No Conversion Required
Crankcase Capacity: 30 Liter --> 30 Liter No Conversion Required
Time between Change of Oil: 100 Hour --> 100 Hour No Conversion Required
Operating Factor: 0.6 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

HP = (Q-(C/(5*t)))*(0.74/(0.0027*η)) --> (0.41-(30/(5*100)))*(0.74/(0.0027*0.6))

Evaluating ... ...

HP = 159.876543209877

STEP 3: Convert Result to Output's Unit

119219.917807407 Watt -->159.876543209877 Horsepower (Check conversion here)

FINAL ANSWER

159.876543209877 ≈ 159.8765 Horsepower <-- Engine power

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Construction Practice, Planning and Management » Construction Management » Management of Construction Equipment » Horsepower given Quantity of Oil

Credits

Created by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has created this Calculator and 500+ more calculators!

Verified by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

< Management of Construction Equipment Calculators

Average Investment when Salvage value is 0

LaTeX Go Average Investment = ((1+Useful Life)/(2*Useful Life))*Capital Cost

Book Value for New Machine

LaTeX Go Book Value = (Hourly Depreciation*Life Span)/0.9

Life Span of Machine

LaTeX Go Life Span = 0.9*Book Value/Hourly Depreciation

Hourly Depreciation

LaTeX Go Hourly Depreciation = 0.9*Book Value/Life Span

Horsepower given Quantity of Oil Formula

LaTeX Go

Engine power = (Quantity of Oil-(Crankcase Capacity/(5*Time between Change of Oil)))*(0.74/(0.0027*Operating Factor))
HP = (Q-(C/(5*t)))*(0.74/(0.0027*η))

What are the factors affecting the Cost of Owning and Operating the Construction Equipment?

The different major costs contributing to the cost of owning and operating construction equipment are as follows:
1. Depreciation Cost
2. Investment Cost
3. Maintenance and Repair Cost
4. Operation Costs
a. Repair charges
b. Depreciation on tyres and tubes
c. Labour charges
d. Fuel charges
e. Operation and maintenance crew charges
f. Miscellaneous supplies
5. Downtime Cost
6. Obsolescence Cost
7. Replacement Cost

How to Calculate Horsepower given Quantity of Oil?

Horsepower given Quantity of Oil calculator uses Engine power = (Quantity of Oil-(Crankcase Capacity/(5*Time between Change of Oil)))*(0.74/(0.0027*Operating Factor)) to calculate the Engine power, The Horsepower given Quantity of Oil formula is defined as the engine power which it can put out. 1 horsepower = 33,000 foot-pounds of work per minute. Engine power is denoted by HP symbol.

How to calculate Horsepower given Quantity of Oil using this online calculator? To use this online calculator for Horsepower given Quantity of Oil, enter Quantity of Oil (Q), Crankcase Capacity (C), Time between Change of Oil (t) & Operating Factor (η) and hit the calculate button. Here is how the Horsepower given Quantity of Oil calculation can be explained with given input values -> 0.214398 = (1.13888888888889E-07-(0.03/(5*360000)))*(0.74/(0.0027*0.6)).

FAQ

What is Horsepower given Quantity of Oil?

The Horsepower given Quantity of Oil formula is defined as the engine power which it can put out. 1 horsepower = 33,000 foot-pounds of work per minute and is represented as HP = (Q-(C/(5*t)))*(0.74/(0.0027*η)) or Engine power = (Quantity of Oil-(Crankcase Capacity/(5*Time between Change of Oil)))*(0.74/(0.0027*Operating Factor)). Quantity of Oil is the amount of oil or lubricating oil that is needed as fuel for machines, Crankcase capacity is the housing for the crankshaft in a reciprocating internal combustion engine, The Time between Change of Oil here refers to the time taken or the number of hours taken between the change of oil & Operating Factor is the ratio of time worked to reference time.

How to calculate Horsepower given Quantity of Oil?

The Horsepower given Quantity of Oil formula is defined as the engine power which it can put out. 1 horsepower = 33,000 foot-pounds of work per minute is calculated using Engine power = (Quantity of Oil-(Crankcase Capacity/(5*Time between Change of Oil)))*(0.74/(0.0027*Operating Factor)). To calculate Horsepower given Quantity of Oil, you need Quantity of Oil (Q), Crankcase Capacity (C), Time between Change of Oil (t) & Operating Factor (η). With our tool, you need to enter the respective value for Quantity of Oil, Crankcase Capacity, Time between Change of Oil & Operating Factor and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search