High-Frequency Band given Complex Frequency Variable Calculator

✖3 dB Frequency is the point at which the signal has been attenuated by 3dB (in a bandpass filter).ⓘ 3 dB Frequency [f_3dB]			+10% -10%
✖Frequency refers to the number of occurrences of a periodic event per time and is measured in cycles/second.ⓘ Frequency [f_t]			+10% -10%
✖Frequency Observed is the number of oscillations made by the sound wave in one second. Its SI Unit is hertz.ⓘ Frequency Observed [f_o]			+10% -10%
✖A pole frequency is that frequency at which the transfer function of a system approaches infinity.ⓘ Pole Frequency [f_p]			+10% -10%
✖Second Pole Frequency is that frequency at which the transfer function of a system approaches infinity.ⓘ Second Pole Frequency [f_p2]			+10% -10%

✖Amplifier Gain in Mid Band is a measure of the ability of a two-port circuit to increase the power or amplitude of a signal from the input to the output port.ⓘ High-Frequency Band given Complex Frequency Variable [A_m]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download High Frequency Response Amplifiers Formula PDF PDF Image

High-Frequency Band given Complex Frequency Variable Solution

STEP 0: Pre-Calculation Summary

Formula Used

Amplifier Gain in Mid Band = sqrt(((1+(3 dB Frequency/Frequency))*(1+(3 dB Frequency/Frequency Observed)))/((1+(3 dB Frequency/Pole Frequency))*(1+(3 dB Frequency/Second Pole Frequency))))
A_m = sqrt(((1+(f_3dB/f_t))*(1+(f_3dB/f_o)))/((1+(f_3dB/f_p))*(1+(f_3dB/f_p2))))
This formula uses 1 Functions, 6 Variables

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Amplifier Gain in Mid Band - (Measured in Decibel) - Amplifier Gain in Mid Band is a measure of the ability of a two-port circuit to increase the power or amplitude of a signal from the input to the output port.
3 dB Frequency - (Measured in Hertz) - 3 dB Frequency is the point at which the signal has been attenuated by 3dB (in a bandpass filter).
Frequency - (Measured in Hertz) - Frequency refers to the number of occurrences of a periodic event per time and is measured in cycles/second.
Frequency Observed - (Measured in Hertz) - Frequency Observed is the number of oscillations made by the sound wave in one second. Its SI Unit is hertz.
Pole Frequency - (Measured in Hertz) - A pole frequency is that frequency at which the transfer function of a system approaches infinity.
Second Pole Frequency - (Measured in Hertz) - Second Pole Frequency is that frequency at which the transfer function of a system approaches infinity.

STEP 1: Convert Input(s) to Base Unit

3 dB Frequency: 50 Hertz --> 50 Hertz No Conversion Required
Frequency: 36.75 Hertz --> 36.75 Hertz No Conversion Required
Frequency Observed: 0.112 Hertz --> 0.112 Hertz No Conversion Required
Pole Frequency: 36.532 Hertz --> 36.532 Hertz No Conversion Required
Second Pole Frequency: 25 Hertz --> 25 Hertz No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

A_m = sqrt(((1+(f_3dB/f_t))*(1+(f_3dB/f_o)))/((1+(f_3dB/f_p))*(1+(f_3dB/f_p2)))) --> sqrt(((1+(50/36.75))*(1+(50/0.112)))/((1+(50/36.532))*(1+(50/25))))

Evaluating ... ...

A_m = 12.191458173796

STEP 3: Convert Result to Output's Unit

12.191458173796 Decibel --> No Conversion Required

FINAL ANSWER

12.191458173796 ≈ 12.19146 Decibel <-- Amplifier Gain in Mid Band

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electronics » Amplifiers » High Frequency Response Amplifiers » Response of CE Amplifier » High-Frequency Band given Complex Frequency Variable

Credits

Created by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has created this Calculator and 600+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Response of CE Amplifier Calculators

Input Capacitance in High-Frequency Gain of CE Amplifier

LaTeX Go Input Capacitance = Collector Base Junction Capacitance+Base Emitter Capacitance*(1+(Transconductance*Load Resistance))

High-Frequency Gain of CE Amplifier

LaTeX Go High Frequency Response = Upper 3-dB Frequency/(2*pi)

Upper 3dB Frequency of CE Amplifier

LaTeX Go Upper 3-dB Frequency = 2*pi*High Frequency Response

Mid Band Gain of CE Amplifier

LaTeX Go Mid Band Gain = Output Voltage/Threshold Voltage

< Common Stage Amplifiers Calculators

Effective High Frequency Time Constant of CE Amplifier

LaTeX Go Effective High Frequency Time Constant = Base Emitter Capacitance*Signal Resistance+(Collector Base Junction Capacitance*(Signal Resistance*(1+Transconductance*Load Resistance)+Load Resistance))+(Capacitance*Load Resistance)

High-Frequency Band given Complex Frequency Variable

LaTeX Go Amplifier Gain in Mid Band = sqrt(((1+(3 dB Frequency/Frequency))*(1+(3 dB Frequency/Frequency Observed)))/((1+(3 dB Frequency/Pole Frequency))*(1+(3 dB Frequency/Second Pole Frequency))))

Collector Base Junction Resistance of CE Amplifier

LaTeX Go Collector Resistance = Signal Resistance*(1+Transconductance*Load Resistance)+Load Resistance

Amplifier Bandwidth in Discrete-Circuit Amplifier

LaTeX Go Amplifier Bandwidth = High Frequency-Low Frequency

High-Frequency Band given Complex Frequency Variable Formula

LaTeX Go

What determine the high frequency response of an amplifier?

The two RC circuits created by the internal transistor capacitances influence the high-frequency response of BJT amplifiers. As the frequency increases and reaches the high end of its midrange values, one of the RC will cause the amplifier's gain to begin dropping off.

How to Calculate High-Frequency Band given Complex Frequency Variable?

High-Frequency Band given Complex Frequency Variable calculator uses Amplifier Gain in Mid Band = sqrt(((1+(3 dB Frequency/Frequency))*(1+(3 dB Frequency/Frequency Observed)))/((1+(3 dB Frequency/Pole Frequency))*(1+(3 dB Frequency/Second Pole Frequency)))) to calculate the Amplifier Gain in Mid Band, The High-frequency band given complex frequency variable formula is defined as a wideband high-frequency amplifier circuit, a Wide frequency band between 75-150 MHz, using transistors, a PNP amplifier. to enhance the signal strength. Before the receiver of the phone. Amplifier Gain in Mid Band is denoted by A_m symbol.

How to calculate High-Frequency Band given Complex Frequency Variable using this online calculator? To use this online calculator for High-Frequency Band given Complex Frequency Variable, enter 3 dB Frequency (f_3dB), Frequency (f_t), Frequency Observed (f_o), Pole Frequency (f_p) & Second Pole Frequency (f_p2) and hit the calculate button. Here is how the High-Frequency Band given Complex Frequency Variable calculation can be explained with given input values -> 12.19146 = sqrt(((1+(50/36.75))*(1+(50/0.112)))/((1+(50/36.532))*(1+(50/25)))).

FAQ

What is High-Frequency Band given Complex Frequency Variable?

The High-frequency band given complex frequency variable formula is defined as a wideband high-frequency amplifier circuit, a Wide frequency band between 75-150 MHz, using transistors, a PNP amplifier. to enhance the signal strength. Before the receiver of the phone and is represented as A_m = sqrt(((1+(f_3dB/f_t))*(1+(f_3dB/f_o)))/((1+(f_3dB/f_p))*(1+(f_3dB/f_p2)))) or Amplifier Gain in Mid Band = sqrt(((1+(3 dB Frequency/Frequency))*(1+(3 dB Frequency/Frequency Observed)))/((1+(3 dB Frequency/Pole Frequency))*(1+(3 dB Frequency/Second Pole Frequency)))). 3 dB Frequency is the point at which the signal has been attenuated by 3dB (in a bandpass filter), Frequency refers to the number of occurrences of a periodic event per time and is measured in cycles/second, Frequency Observed is the number of oscillations made by the sound wave in one second. Its SI Unit is hertz, A pole frequency is that frequency at which the transfer function of a system approaches infinity & Second Pole Frequency is that frequency at which the transfer function of a system approaches infinity.

How to calculate High-Frequency Band given Complex Frequency Variable?

The High-frequency band given complex frequency variable formula is defined as a wideband high-frequency amplifier circuit, a Wide frequency band between 75-150 MHz, using transistors, a PNP amplifier. to enhance the signal strength. Before the receiver of the phone is calculated using Amplifier Gain in Mid Band = sqrt(((1+(3 dB Frequency/Frequency))*(1+(3 dB Frequency/Frequency Observed)))/((1+(3 dB Frequency/Pole Frequency))*(1+(3 dB Frequency/Second Pole Frequency)))). To calculate High-Frequency Band given Complex Frequency Variable, you need 3 dB Frequency (f_3dB), Frequency (f_t), Frequency Observed (f_o), Pole Frequency (f_p) & Second Pole Frequency (f_p2). With our tool, you need to enter the respective value for 3 dB Frequency, Frequency, Frequency Observed, Pole Frequency & Second Pole Frequency and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search