Height or depth of paraboloid for volume of air Solution

STEP 0: Pre-Calculation Summary
Formula Used
Height of Crack = ((Diameter^2)/(2*(Radius^2)))*(Length-Initial Height of Liquid)
hc = ((D^2)/(2*(r1^2)))*(L-Hi)
This formula uses 5 Variables
Variables Used
Height of Crack - (Measured in Meter) - Height of Crack is the size of a flaw or crack in a material that can lead to catastrophic failure under a given stress.
Diameter - (Measured in Meter) - Diameter is a straight line passing from side to side through the center of a body or figure, especially a circle or sphere.
Radius - (Measured in Meter) - Radius is a radial line from the focus to any point of a curve for 1st Radius.
Length - (Measured in Meter) - Length is the measurement or extent of something from end to end.
Initial Height of Liquid - (Measured in Meter) - The Initial Height of Liquid is a variable from the tank emptying through an orifice at its bottom.
STEP 1: Convert Input(s) to Base Unit
Diameter: 1050 Centimeter --> 10.5 Meter (Check conversion ​here)
Radius: 1250 Centimeter --> 12.5 Meter (Check conversion ​here)
Length: 2500 Centimeter --> 25 Meter (Check conversion ​here)
Initial Height of Liquid: 2010 Centimeter --> 20.1 Meter (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
hc = ((D^2)/(2*(r1^2)))*(L-Hi) --> ((10.5^2)/(2*(12.5^2)))*(25-20.1)
Evaluating ... ...
hc = 1.72872
STEP 3: Convert Result to Output's Unit
1.72872 Meter -->172.872 Centimeter (Check conversion ​here)
FINAL ANSWER
172.872 Centimeter <-- Height of Crack
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Maiarutselvan V
PSG College of Technology (PSGCT), Coimbatore
Maiarutselvan V has created this Calculator and 300+ more calculators!
Verifier Image
Verified by Sanjay Krishna
Amrita School of Engineering (ASE), Vallikavu
Sanjay Krishna has verified this Calculator and 200+ more calculators!

Kinematics of Flow Calculators

Resultant velocity for two velocity components
​ LaTeX ​ Go Resultant Velocity = sqrt((Velocity Component at U^2)+(Velocity Component at V^2))
Angular Velocity of Vortex using Depth of Parabola
​ LaTeX ​ Go Angular Velocity = sqrt((Depth of Parabola*2*9.81)/(Radius^2))
Depth of Parabola formed at Free Surface of Water
​ LaTeX ​ Go Depth of Parabola = ((Angular Velocity^2)*(Radius^2))/(2*9.81)
Rate of flow or discharge
​ LaTeX ​ Go Rate of Flow = Cross-Sectional Area*Average Velocity

Height or depth of paraboloid for volume of air Formula

​LaTeX ​Go
Height of Crack = ((Diameter^2)/(2*(Radius^2)))*(Length-Initial Height of Liquid)
hc = ((D^2)/(2*(r1^2)))*(L-Hi)

What is vortex flow?

It is defined as the flow of fluid along the curved path or the flow of a rotating mass of fluid. It is of two types, forced and free vortex flow.

What are closed vessels?

The Closed vessel (CV) is the equipment used to study the ballistic parameters by recording burning time history, pressure buildup during the process, and vivacity of the propellants.

How to Calculate Height or depth of paraboloid for volume of air?

Height or depth of paraboloid for volume of air calculator uses Height of Crack = ((Diameter^2)/(2*(Radius^2)))*(Length-Initial Height of Liquid) to calculate the Height of Crack, The Height or depth of paraboloid for volume of air is derived from the relation volume of air before rotation and after rotation in closed cylindrical vessels considering the diameter of vessel D, length of vessel L, the radius of the paraboloid r, and the initial height of the liquid. Height of Crack is denoted by hc symbol.

How to calculate Height or depth of paraboloid for volume of air using this online calculator? To use this online calculator for Height or depth of paraboloid for volume of air, enter Diameter (D), Radius (r1), Length (L) & Initial Height of Liquid (Hi) and hit the calculate button. Here is how the Height or depth of paraboloid for volume of air calculation can be explained with given input values -> 17287.2 = ((10.5^2)/(2*(12.5^2)))*(25-20.1).

FAQ

What is Height or depth of paraboloid for volume of air?
The Height or depth of paraboloid for volume of air is derived from the relation volume of air before rotation and after rotation in closed cylindrical vessels considering the diameter of vessel D, length of vessel L, the radius of the paraboloid r, and the initial height of the liquid and is represented as hc = ((D^2)/(2*(r1^2)))*(L-Hi) or Height of Crack = ((Diameter^2)/(2*(Radius^2)))*(Length-Initial Height of Liquid). Diameter is a straight line passing from side to side through the center of a body or figure, especially a circle or sphere, Radius is a radial line from the focus to any point of a curve for 1st Radius, Length is the measurement or extent of something from end to end & The Initial Height of Liquid is a variable from the tank emptying through an orifice at its bottom.
How to calculate Height or depth of paraboloid for volume of air?
The Height or depth of paraboloid for volume of air is derived from the relation volume of air before rotation and after rotation in closed cylindrical vessels considering the diameter of vessel D, length of vessel L, the radius of the paraboloid r, and the initial height of the liquid is calculated using Height of Crack = ((Diameter^2)/(2*(Radius^2)))*(Length-Initial Height of Liquid). To calculate Height or depth of paraboloid for volume of air, you need Diameter (D), Radius (r1), Length (L) & Initial Height of Liquid (Hi). With our tool, you need to enter the respective value for Diameter, Radius, Length & Initial Height of Liquid and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!