Height of Upper Part of Vessel Calculator

✖Wind Load acting on Upper Part of Vessel refers to the external force exerted by wind on the exposed surface area of the vessel above a certain height.ⓘ Wind Load acting on Upper Part of Vessel [P_uw]			+10% -10%
✖Coefficient depending on Shape Factor is used in statistics to measure the relationship between a particular shape factor and the outcome of a given experiment or trial.ⓘ Coefficient depending on Shape Factor [k₁]			+10% -10%
✖Coefficient Period of one cycle of vibration is determined by the mass and stiffness of the vessel, as well as the damping characteristics and the excitation frequency of the vibratory force.ⓘ Coefficient Period of One Cycle of Vibration [k_coefficient]			+10% -10%
✖Wind Pressure acting on Upper Part of Vessel is known as wind load based on the size, shape and location of the structure, as well as the wind velocity and direction.ⓘ Wind Pressure acting on Upper Part of Vessel [p₂]			+10% -10%
✖Outside Diameter of Vessel is the maximum distance between two points on the outer surface of the vessel.ⓘ Outside Diameter of Vessel [D_o]			+10% -10%

✖Height of Upper Part of Vessel is typically defined as the distance from the bottom of the vessel to a certain point above the liquid level.ⓘ Height of Upper Part of Vessel [h₂]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Design of Anchor Bolt and Bolting Chair Formulas PDF PDF Image

Height of Upper Part of Vessel Solution

STEP 0: Pre-Calculation Summary

Formula Used

Height of Upper Part of Vessel = Wind Load acting on Upper Part of Vessel/(Coefficient depending on Shape Factor*Coefficient Period of One Cycle of Vibration*Wind Pressure acting on Upper Part of Vessel*Outside Diameter of Vessel)
h₂ = P_uw/(k₁*k_coefficient*p₂*D_o)
This formula uses 6 Variables

Variables Used

Height of Upper Part of Vessel - (Measured in Meter) - Height of Upper Part of Vessel is typically defined as the distance from the bottom of the vessel to a certain point above the liquid level.
Wind Load acting on Upper Part of Vessel - (Measured in Newton) - Wind Load acting on Upper Part of Vessel refers to the external force exerted by wind on the exposed surface area of the vessel above a certain height.
Coefficient depending on Shape Factor - Coefficient depending on Shape Factor is used in statistics to measure the relationship between a particular shape factor and the outcome of a given experiment or trial.
Coefficient Period of One Cycle of Vibration - Coefficient Period of one cycle of vibration is determined by the mass and stiffness of the vessel, as well as the damping characteristics and the excitation frequency of the vibratory force.
Wind Pressure acting on Upper Part of Vessel - (Measured in Pascal) - Wind Pressure acting on Upper Part of Vessel is known as wind load based on the size, shape and location of the structure, as well as the wind velocity and direction.
Outside Diameter of Vessel - (Measured in Meter) - Outside Diameter of Vessel is the maximum distance between two points on the outer surface of the vessel.

STEP 1: Convert Input(s) to Base Unit

Wind Load acting on Upper Part of Vessel: 119 Newton --> 119 Newton No Conversion Required
Coefficient depending on Shape Factor: 0.69 --> No Conversion Required
Coefficient Period of One Cycle of Vibration: 4 --> No Conversion Required
Wind Pressure acting on Upper Part of Vessel: 40 Newton per Square Meter --> 40 Pascal (Check conversion here)
Outside Diameter of Vessel: 0.6 Meter --> 0.6 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h₂ = P_uw/(k₁*k_coefficient*p₂*D_o) --> 119/(0.69*4*40*0.6)

Evaluating ... ...

h₂ = 1.79649758454106

STEP 3: Convert Result to Output's Unit

1.79649758454106 Meter --> No Conversion Required

FINAL ANSWER

1.79649758454106 ≈ 1.796498 Meter <-- Height of Upper Part of Vessel

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Chemical Engineering » Process Equipment Design » Vessel Supports » Design of Anchor Bolt and Bolting Chair » Height of Upper Part of Vessel

Credits

Created by Heet

Thadomal Shahani Engineering College (Tsec), Mumbai

Heet has created this Calculator and 200+ more calculators!

Verified by Prerana Bakli

University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA

Prerana Bakli has verified this Calculator and 1600+ more calculators!

< Design of Anchor Bolt and Bolting Chair Calculators

Height of Lower Part of Vessel

LaTeX Go Height of Lower Part of Vessel = Wind Load acting on Lower Part of Vessel/(Coefficient depending on Shape Factor*Coefficient Period of One Cycle of Vibration*Wind Pressure acting on Lower Part of Vessel*Outside Diameter of Vessel)

Height of Upper Part of Vessel

LaTeX Go Height of Upper Part of Vessel = Wind Load acting on Upper Part of Vessel/(Coefficient depending on Shape Factor*Coefficient Period of One Cycle of Vibration*Wind Pressure acting on Upper Part of Vessel*Outside Diameter of Vessel)

Diameter of Anchor Bolt Circle

LaTeX Go Diameter of Anchor Bolt Circle = ((4*(Total Wind Force acting on Vessel))*(Height of Vessel above Foundation-Clearance between Vessel Bottom and Foundation))/(Number of Brackets*Maximum Compressive Load on Remote Bracket)

Load on Each Bolt

LaTeX Go Load on Each Bolt = Stress in Bearing Plate and Concrete Foundation*(Area of Contact in Bearing Plate and Foundation/Number of Bolts)

Height of Upper Part of Vessel Formula

LaTeX Go

What is Vessel Support in Process Equipment Design?

In equipment design, vessel support refers to the structural support provided to vessels or tanks used in various industrial processes. Vessels or tanks are used to store or transport various types of materials such as liquids, gases, and solids in industries such as chemical, petrochemical, pharmaceutical, and food processing.The design of vessel support in equipment design must comply with various standards and codes, such as the American Petroleum Institute (API) standards, American Society of Mechanical Engineers (ASME) codes, and other international standards. The vessel support design must also be approved by regulatory bodies, such as local or national authorities, before construction or installation can begin.Overall, vessel support in equipment design is a critical aspect of industrial processes involving the use of vessels or tanks.

What is Wind Pressure?

Wind pressure refers to the force exerted by the wind on a surface perpendicular to its direction. It is influenced by factors such as wind speed, air density, and the shape and orientation of the surface. Wind pressure is an important consideration in the design of buildings, structures, and other objects that may be subject to wind loading, as excessive wind pressure can cause damage or failure. Wind pressure is typically expressed in units of force per unit area, such as pounds per square foot (psf) or pascals (Pa).

How to Calculate Height of Upper Part of Vessel?

Height of Upper Part of Vessel calculator uses Height of Upper Part of Vessel = Wind Load acting on Upper Part of Vessel/(Coefficient depending on Shape Factor*Coefficient Period of One Cycle of Vibration*Wind Pressure acting on Upper Part of Vessel*Outside Diameter of Vessel) to calculate the Height of Upper Part of Vessel, The Height of Upper Part of Vessel refers to the vertical distance between the vessel's baseline and the highest point of the vessel's superstructure, including any masts, funnels, or other protrusions above the main deck level. Height of Upper Part of Vessel is denoted by h₂ symbol.

How to calculate Height of Upper Part of Vessel using this online calculator? To use this online calculator for Height of Upper Part of Vessel, enter Wind Load acting on Upper Part of Vessel (P_uw), Coefficient depending on Shape Factor (k₁), Coefficient Period of One Cycle of Vibration (k_coefficient), Wind Pressure acting on Upper Part of Vessel (p₂) & Outside Diameter of Vessel (D_o) and hit the calculate button. Here is how the Height of Upper Part of Vessel calculation can be explained with given input values -> 1.796498 = 119/(0.69*4*40*0.6).

FAQ

What is Height of Upper Part of Vessel?

The Height of Upper Part of Vessel refers to the vertical distance between the vessel's baseline and the highest point of the vessel's superstructure, including any masts, funnels, or other protrusions above the main deck level and is represented as h₂ = P_uw/(k₁*k_coefficient*p₂*D_o) or Height of Upper Part of Vessel = Wind Load acting on Upper Part of Vessel/(Coefficient depending on Shape Factor*Coefficient Period of One Cycle of Vibration*Wind Pressure acting on Upper Part of Vessel*Outside Diameter of Vessel). Wind Load acting on Upper Part of Vessel refers to the external force exerted by wind on the exposed surface area of the vessel above a certain height, Coefficient depending on Shape Factor is used in statistics to measure the relationship between a particular shape factor and the outcome of a given experiment or trial, Coefficient Period of one cycle of vibration is determined by the mass and stiffness of the vessel, as well as the damping characteristics and the excitation frequency of the vibratory force, Wind Pressure acting on Upper Part of Vessel is known as wind load based on the size, shape and location of the structure, as well as the wind velocity and direction & Outside Diameter of Vessel is the maximum distance between two points on the outer surface of the vessel.

How to calculate Height of Upper Part of Vessel?

The Height of Upper Part of Vessel refers to the vertical distance between the vessel's baseline and the highest point of the vessel's superstructure, including any masts, funnels, or other protrusions above the main deck level is calculated using Height of Upper Part of Vessel = Wind Load acting on Upper Part of Vessel/(Coefficient depending on Shape Factor*Coefficient Period of One Cycle of Vibration*Wind Pressure acting on Upper Part of Vessel*Outside Diameter of Vessel). To calculate Height of Upper Part of Vessel, you need Wind Load acting on Upper Part of Vessel (P_uw), Coefficient depending on Shape Factor (k₁), Coefficient Period of One Cycle of Vibration (k_coefficient), Wind Pressure acting on Upper Part of Vessel (p₂) & Outside Diameter of Vessel (D_o). With our tool, you need to enter the respective value for Wind Load acting on Upper Part of Vessel, Coefficient depending on Shape Factor, Coefficient Period of One Cycle of Vibration, Wind Pressure acting on Upper Part of Vessel & Outside Diameter of Vessel and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search