Height of Surges given Celerity of Wave Calculator

✖Velocity of Fluid at Negative Surges is defined as the velocity of the flowing liquid at a Negative Surges.ⓘ Velocity of Fluid at Negative Surges [V_{Negativesurges}]			+10% -10%
✖Depth of Point 2 is the depth of point below the free surface in a static mass of liquid.ⓘ Depth of Point 2 [D₂]			+10% -10%
✖Depth of Point 1 is the depth of point below the free surface in a static mass of liquid.ⓘ Depth of Point 1 [h ₁]			+10% -10%
✖Celerity of Wave is the addition to the normal water velocity of the channels.ⓘ Celerity of Wave [C_w]			+10% -10%

✖Height of Channel is the distance between the lowest and highest points of a person/ shape/ object standing upright.ⓘ Height of Surges given Celerity of Wave [H_ch]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Non uniform Flow in Channels Formula PDF PDF Image

Height of Surges given Celerity of Wave Solution

STEP 0: Pre-Calculation Summary

Formula Used

Height of Channel = (Velocity of Fluid at Negative Surges)/(((([g]*(Depth of Point 2+Depth of Point 1))/(2*Depth of Point 1))/Celerity of Wave))
H_ch = (V_{Negativesurges})/(((([g]*(D₂+h ₁))/(2*h ₁))/C_w))
This formula uses 1 Constants, 5 Variables

Constants Used

[g] - Gravitational acceleration on Earth Value Taken As 9.80665

Variables Used

Height of Channel - (Measured in Meter) - Height of Channel is the distance between the lowest and highest points of a person/ shape/ object standing upright.
Velocity of Fluid at Negative Surges - (Measured in Meter per Second) - Velocity of Fluid at Negative Surges is defined as the velocity of the flowing liquid at a Negative Surges.
Depth of Point 2 - (Measured in Meter) - Depth of Point 2 is the depth of point below the free surface in a static mass of liquid.
Depth of Point 1 - (Measured in Meter) - Depth of Point 1 is the depth of point below the free surface in a static mass of liquid.
Celerity of Wave - (Measured in Meter per Second) - Celerity of Wave is the addition to the normal water velocity of the channels.

STEP 1: Convert Input(s) to Base Unit

Velocity of Fluid at Negative Surges: 3 Meter per Second --> 3 Meter per Second No Conversion Required
Depth of Point 2: 15 Meter --> 15 Meter No Conversion Required
Depth of Point 1: 10 Meter --> 10 Meter No Conversion Required
Celerity of Wave: 5.4 Meter per Second --> 5.4 Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

H_ch = (V_{Negativesurges})/(((([g]*(D₂+h ₁))/(2*h ₁))/C_w)) --> (3)/(((([g]*(15+10))/(2*10))/5.4))

Evaluating ... ...

H_ch = 1.3215522120194

STEP 3: Convert Result to Output's Unit

1.3215522120194 Meter --> No Conversion Required

FINAL ANSWER

1.3215522120194 ≈ 1.321552 Meter <-- Height of Channel

(Calculation completed in 00.010 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Non uniform Flow in Channels » Surges in Open Channel Flow » Surge due to Sudden Reduction of Flow » Height of Surges given Celerity of Wave

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Surge due to Sudden Reduction of Flow Calculators

Velocity at Depth2 given Absolute Velocity of Surges Moving toward Right

LaTeX Go Velocity of Fluid at 2 = ((Absolute Velocity of Issuing Jet*(Depth of Point 1-Depth of Point 2))+(Velocity of Fluid at Negative Surges*Depth of Point 1))/Depth of Point 2

Velocity at Depth1 given Absolute Velocity of Surge Moving toward Right

LaTeX Go Velocity of Fluid at Negative Surges = ((Absolute Velocity of Issuing Jet*(Depth of Point 2-Depth of Point 1))+(Velocity of Fluid at 2*Depth of Point 2))/Depth of Point 1

Depth of Flow2 given Absolute Velocity of Surge Moving towards Right Direction

LaTeX Go Depth of Point 2 = Depth of Point 1/((Absolute Velocity of Issuing Jet-Velocity of Fluid at 2)/(Absolute Velocity of Issuing Jet-Velocity of Fluid at Negative Surges))

Depth of Flow given Absolute Velocity of Surge Moving towards Right

LaTeX Go Depth of Point 1 = ((Absolute Velocity of Issuing Jet+Velocity of Fluid at 2)/(Absolute Velocity of Issuing Jet+Velocity of Fluid at Negative Surges))*Depth of Point 2

Height of Surges given Celerity of Wave Formula

LaTeX Go

What are Surges?

Surges, or transients, are brief overvoltage spikes or disturbances on a power waveform that can damage, degrade, or destroy electronic equipment within any home, commercial building, industrial, or manufacturing facility. Transients can reach amplitudes of tens of thousands of volts.

How to Calculate Height of Surges given Celerity of Wave?

Height of Surges given Celerity of Wave calculator uses Height of Channel = (Velocity of Fluid at Negative Surges)/(((([g]*(Depth of Point 2+Depth of Point 1))/(2*Depth of Point 1))/Celerity of Wave)) to calculate the Height of Channel, The Height of Surges given Celerity of Wave is defined as the height of flow change occurring in channel. Height of Channel is denoted by H_ch symbol.

How to calculate Height of Surges given Celerity of Wave using this online calculator? To use this online calculator for Height of Surges given Celerity of Wave, enter Velocity of Fluid at Negative Surges (V_{Negativesurges}), Depth of Point 2 (D₂), Depth of Point 1 (h ₁) & Celerity of Wave (C_w) and hit the calculate button. Here is how the Height of Surges given Celerity of Wave calculation can be explained with given input values -> 1.321552 = (3)/(((([g]*(15+10))/(2*10))/5.4)).

FAQ

What is Height of Surges given Celerity of Wave?

The Height of Surges given Celerity of Wave is defined as the height of flow change occurring in channel and is represented as H_ch = (V_{Negativesurges})/(((([g]*(D₂+h ₁))/(2*h ₁))/C_w)) or Height of Channel = (Velocity of Fluid at Negative Surges)/(((([g]*(Depth of Point 2+Depth of Point 1))/(2*Depth of Point 1))/Celerity of Wave)). Velocity of Fluid at Negative Surges is defined as the velocity of the flowing liquid at a Negative Surges, Depth of Point 2 is the depth of point below the free surface in a static mass of liquid, Depth of Point 1 is the depth of point below the free surface in a static mass of liquid & Celerity of Wave is the addition to the normal water velocity of the channels.

How to calculate Height of Surges given Celerity of Wave?

The Height of Surges given Celerity of Wave is defined as the height of flow change occurring in channel is calculated using Height of Channel = (Velocity of Fluid at Negative Surges)/(((([g]*(Depth of Point 2+Depth of Point 1))/(2*Depth of Point 1))/Celerity of Wave)). To calculate Height of Surges given Celerity of Wave, you need Velocity of Fluid at Negative Surges (V_{Negativesurges}), Depth of Point 2 (D₂), Depth of Point 1 (h ₁) & Celerity of Wave (C_w). With our tool, you need to enter the respective value for Velocity of Fluid at Negative Surges, Depth of Point 2, Depth of Point 1 & Celerity of Wave and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search