Height of Settling Zone given Height at Outlet Zone with respect to Settling Velocity Calculator

✖The Outer Height refers to the external vertical dimension of an object or structure.ⓘ Outer Height [H]			+10% -10%
✖The Settling Velocity refers to the rate at which a particle suspended in a fluid (like water or air) falls under the influence of gravity until reaches a constant speed.ⓘ Settling Velocity [V_s]			+10% -10%
✖The Falling Speed refers to the constant speed at which a particle falls through a fluid when the force of gravity is balanced by the drag force and buoyant force acting on the particle.ⓘ Falling Speed [v^']			+10% -10%

✖The Height of Crack refers to the size of a flaw or crack in a material that can lead to catastrophic failure under a given stress.ⓘ Height of Settling Zone given Height at Outlet Zone with respect to Settling Velocity [h]

⎘ Copy

👎

Formula

Reset

👍

Download Environmental Engineering Formula PDF PDF Image

Height of Settling Zone given Height at Outlet Zone with respect to Settling Velocity Solution

STEP 0: Pre-Calculation Summary

Formula Used

Height of Crack = Outer Height*Settling Velocity/Falling Speed
h = H*V_s/v^'
This formula uses 4 Variables

Variables Used

Height of Crack - (Measured in Meter) - The Height of Crack refers to the size of a flaw or crack in a material that can lead to catastrophic failure under a given stress.
Outer Height - (Measured in Meter) - The Outer Height refers to the external vertical dimension of an object or structure.
Settling Velocity - (Measured in Meter per Second) - The Settling Velocity refers to the rate at which a particle suspended in a fluid (like water or air) falls under the influence of gravity until reaches a constant speed.
Falling Speed - (Measured in Meter per Second) - The Falling Speed refers to the constant speed at which a particle falls through a fluid when the force of gravity is balanced by the drag force and buoyant force acting on the particle.

STEP 1: Convert Input(s) to Base Unit

Outer Height: 40 Meter --> 40 Meter No Conversion Required
Settling Velocity: 0.03 Meter per Second --> 0.03 Meter per Second No Conversion Required
Falling Speed: 0.1 Meter per Second --> 0.1 Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h = H*V_s/v^' --> 40*0.03/0.1

Evaluating ... ...

h = 12

STEP 3: Convert Result to Output's Unit

12 Meter -->12000 Millimeter (Check conversion here)

FINAL ANSWER

12000 Millimeter <-- Height of Crack

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Treatment of Water 1 Sedimentation » Settling Zone » Height of Settling Zone » Height of Settling Zone given Height at Outlet Zone with respect to Settling Velocity

Credits

Created by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has created this Calculator and 500+ more calculators!

Verified by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has verified this Calculator and 500+ more calculators!

< Height of Settling Zone Calculators

Height of Settling Zone given Height at Outlet Zone with respect to Discharge

Go Height of Crack = Outer Height*Discharge/(Length*Width*Falling Speed)

Height of Settling Zone given Detention Time

Go Height of Crack = (Detention Time*Discharge)/(Length*Width)

Height of Settling Zone given Height at Outlet Zone with respect to Settling Velocity

Go Height of Crack = Outer Height*Settling Velocity/Falling Speed

Height of Settling Zone given Ratio of Removal with respect to Tank Height

Go Height of Crack = Outer Height/Removal Ratio

Height of Settling Zone given Height at Outlet Zone with respect to Settling Velocity Formula

Height of Crack = Outer Height*Settling Velocity/Falling Speed
h = H*V_s/v^'

What is Falling Speed ?

The falling speed is the maximum velocity (speed) attainable by an object as it falls through a fluid.

How to Calculate Height of Settling Zone given Height at Outlet Zone with respect to Settling Velocity?

Height of Settling Zone given Height at Outlet Zone with respect to Settling Velocity calculator uses Height of Crack = Outer Height*Settling Velocity/Falling Speed to calculate the Height of Crack, The Height of Settling Zone given Height at Outlet Zone with respect to Settling Velocity formula is defined as the vertical distance through which water flows and particles settle under gravity before the water exits the tank as clarified effluent. Height of Crack is denoted by h symbol.

How to calculate Height of Settling Zone given Height at Outlet Zone with respect to Settling Velocity using this online calculator? To use this online calculator for Height of Settling Zone given Height at Outlet Zone with respect to Settling Velocity, enter Outer Height (H), Settling Velocity (V_s) & Falling Speed (v^') and hit the calculate button. Here is how the Height of Settling Zone given Height at Outlet Zone with respect to Settling Velocity calculation can be explained with given input values -> 1.2E+7 = 40*0.03/0.1.

FAQ

What is Height of Settling Zone given Height at Outlet Zone with respect to Settling Velocity?

The Height of Settling Zone given Height at Outlet Zone with respect to Settling Velocity formula is defined as the vertical distance through which water flows and particles settle under gravity before the water exits the tank as clarified effluent and is represented as h = H*V_s/v^' or Height of Crack = Outer Height*Settling Velocity/Falling Speed. The Outer Height refers to the external vertical dimension of an object or structure, The Settling Velocity refers to the rate at which a particle suspended in a fluid (like water or air) falls under the influence of gravity until reaches a constant speed & The Falling Speed refers to the constant speed at which a particle falls through a fluid when the force of gravity is balanced by the drag force and buoyant force acting on the particle.

How to calculate Height of Settling Zone given Height at Outlet Zone with respect to Settling Velocity?

The Height of Settling Zone given Height at Outlet Zone with respect to Settling Velocity formula is defined as the vertical distance through which water flows and particles settle under gravity before the water exits the tank as clarified effluent is calculated using Height of Crack = Outer Height*Settling Velocity/Falling Speed. To calculate Height of Settling Zone given Height at Outlet Zone with respect to Settling Velocity, you need Outer Height (H), Settling Velocity (V_s) & Falling Speed (v^'). With our tool, you need to enter the respective value for Outer Height, Settling Velocity & Falling Speed and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Height of Crack?

In this formula, Height of Crack uses Outer Height, Settling Velocity & Falling Speed. We can use 3 other way(s) to calculate the same, which is/are as follows -

Height of Crack = (Detention Time*Discharge)/(Length*Width)
Height of Crack = Outer Height*Discharge/(Length*Width*Falling Speed)
Height of Crack = Outer Height/Removal Ratio

Home

FREE PDFs

🔍 Search