Height of Paraboloid given Surface to Volume Ratio Calculator

✖Lateral Surface Area of Paraboloid is the total quantity of two dimensional plane enclosed on the lateral curved surface of Paraboloid.ⓘ Lateral Surface Area of Paraboloid [LSA]			+10% -10%
✖Radius of Paraboloid is defined as the length of the straight line from the center to any point on the circumference of the circular face of the Paraboloid.ⓘ Radius of Paraboloid [r]			+10% -10%
✖Surface to Volume Ratio of Paraboloid is the numerical ratio of the total surface area of the Paraboloid to the volume of the Paraboloid.ⓘ Surface to Volume Ratio of Paraboloid [R_A/V]			+10% -10%

✖Height of Paraboloid is the vertical distance from the centre of the circular face to the local extreme point of the Paraboloid.ⓘ Height of Paraboloid given Surface to Volume Ratio [h]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Paraboloid Formula PDF PDF Image

Height of Paraboloid given Surface to Volume Ratio Solution

STEP 0: Pre-Calculation Summary

Formula Used

Height of Paraboloid = (Lateral Surface Area of Paraboloid+pi*Radius of Paraboloid^2)/(1/2*pi*Radius of Paraboloid^2*Surface to Volume Ratio of Paraboloid)
h = (LSA+pi*r^2)/(1/2*pi*r^2*R_A/V)
This formula uses 1 Constants, 4 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Height of Paraboloid - (Measured in Meter) - Height of Paraboloid is the vertical distance from the centre of the circular face to the local extreme point of the Paraboloid.
Lateral Surface Area of Paraboloid - (Measured in Square Meter) - Lateral Surface Area of Paraboloid is the total quantity of two dimensional plane enclosed on the lateral curved surface of Paraboloid.
Radius of Paraboloid - (Measured in Meter) - Radius of Paraboloid is defined as the length of the straight line from the center to any point on the circumference of the circular face of the Paraboloid.
Surface to Volume Ratio of Paraboloid - (Measured in 1 per Meter) - Surface to Volume Ratio of Paraboloid is the numerical ratio of the total surface area of the Paraboloid to the volume of the Paraboloid.

STEP 1: Convert Input(s) to Base Unit

Lateral Surface Area of Paraboloid: 1050 Square Meter --> 1050 Square Meter No Conversion Required
Radius of Paraboloid: 5 Meter --> 5 Meter No Conversion Required
Surface to Volume Ratio of Paraboloid: 0.6 1 per Meter --> 0.6 1 per Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h = (LSA+pi*r^2)/(1/2*pi*r^2*R_A/V) --> (1050+pi*5^2)/(1/2*pi*5^2*0.6)

Evaluating ... ...

h = 47.896717399064

STEP 3: Convert Result to Output's Unit

47.896717399064 Meter --> No Conversion Required

FINAL ANSWER

47.896717399064 ≈ 47.89672 Meter <-- Height of Paraboloid

(Calculation completed in 00.004 seconds)

You are here -

Home » Math » Geometry » 3D Geometry » Paraboloid » Height of Paraboloid » Height of Paraboloid given Surface to Volume Ratio

Credits

Created by Shweta Patil

Walchand College of Engineering (WCE), Sangli

Shweta Patil has created this Calculator and 2500+ more calculators!

Verified by Mridul Sharma

Indian Institute of Information Technology (IIIT), Bhopal

Mridul Sharma has verified this Calculator and 1700+ more calculators!

< Height of Paraboloid Calculators

Height of Paraboloid given Surface to Volume Ratio

LaTeX Go Height of Paraboloid = (Lateral Surface Area of Paraboloid+pi*Radius of Paraboloid^2)/(1/2*pi*Radius of Paraboloid^2*Surface to Volume Ratio of Paraboloid)

Height of Paraboloid given Volume, Lateral Surface Area and Total Surface Area

LaTeX Go Height of Paraboloid = (2*Volume of Paraboloid)/(Total Surface Area of Paraboloid-Lateral Surface Area of Paraboloid)

Height of Paraboloid given Volume

LaTeX Go Height of Paraboloid = (2*Volume of Paraboloid)/(pi*Radius of Paraboloid^2)

Height of Paraboloid

LaTeX Go Height of Paraboloid = Shape Parameter of Paraboloid*Radius of Paraboloid^2

Height of Paraboloid given Surface to Volume Ratio Formula

LaTeX Go

Height of Paraboloid = (Lateral Surface Area of Paraboloid+pi*Radius of Paraboloid^2)/(1/2*pi*Radius of Paraboloid^2*Surface to Volume Ratio of Paraboloid)
h = (LSA+pi*r^2)/(1/2*pi*r^2*R_A/V)

What is Paraboloid?

In geometry, a Paraboloid is a quadric surface that has exactly one axis of symmetry and no center of symmetry. The term "paraboloid" is derived from parabola, which refers to a conic section that has a similar property of symmetry. Every plane section of a paraboloid by a plane parallel to the axis of symmetry is a parabola. The paraboloid is hyperbolic if every other plane section is either a hyperbola, or two crossing lines (in the case of a section by a tangent plane). The paraboloid is elliptic if every other nonempty plane section is either an ellipse, or a single point (in the case of a section by a tangent plane). A paraboloid is either elliptic or hyperbolic.

How to Calculate Height of Paraboloid given Surface to Volume Ratio?

Height of Paraboloid given Surface to Volume Ratio calculator uses Height of Paraboloid = (Lateral Surface Area of Paraboloid+pi*Radius of Paraboloid^2)/(1/2*pi*Radius of Paraboloid^2*Surface to Volume Ratio of Paraboloid) to calculate the Height of Paraboloid, The Height of Paraboloid given Surface to Volume Ratio formula is defined as the vertical distance from the centre of the circular face to the local extreme point of the Paraboloid, calculated using surface to volume ratio. Height of Paraboloid is denoted by h symbol.

How to calculate Height of Paraboloid given Surface to Volume Ratio using this online calculator? To use this online calculator for Height of Paraboloid given Surface to Volume Ratio, enter Lateral Surface Area of Paraboloid (LSA), Radius of Paraboloid (r) & Surface to Volume Ratio of Paraboloid (R_A/V) and hit the calculate button. Here is how the Height of Paraboloid given Surface to Volume Ratio calculation can be explained with given input values -> 47.89672 = (1050+pi*5^2)/(1/2*pi*5^2*0.6).

FAQ

What is Height of Paraboloid given Surface to Volume Ratio?

The Height of Paraboloid given Surface to Volume Ratio formula is defined as the vertical distance from the centre of the circular face to the local extreme point of the Paraboloid, calculated using surface to volume ratio and is represented as h = (LSA+pi*r^2)/(1/2*pi*r^2*R_A/V) or Height of Paraboloid = (Lateral Surface Area of Paraboloid+pi*Radius of Paraboloid^2)/(1/2*pi*Radius of Paraboloid^2*Surface to Volume Ratio of Paraboloid). Lateral Surface Area of Paraboloid is the total quantity of two dimensional plane enclosed on the lateral curved surface of Paraboloid, Radius of Paraboloid is defined as the length of the straight line from the center to any point on the circumference of the circular face of the Paraboloid & Surface to Volume Ratio of Paraboloid is the numerical ratio of the total surface area of the Paraboloid to the volume of the Paraboloid.

How to calculate Height of Paraboloid given Surface to Volume Ratio?

The Height of Paraboloid given Surface to Volume Ratio formula is defined as the vertical distance from the centre of the circular face to the local extreme point of the Paraboloid, calculated using surface to volume ratio is calculated using Height of Paraboloid = (Lateral Surface Area of Paraboloid+pi*Radius of Paraboloid^2)/(1/2*pi*Radius of Paraboloid^2*Surface to Volume Ratio of Paraboloid). To calculate Height of Paraboloid given Surface to Volume Ratio, you need Lateral Surface Area of Paraboloid (LSA), Radius of Paraboloid (r) & Surface to Volume Ratio of Paraboloid (R_A/V). With our tool, you need to enter the respective value for Lateral Surface Area of Paraboloid, Radius of Paraboloid & Surface to Volume Ratio of Paraboloid and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Height of Paraboloid?

In this formula, Height of Paraboloid uses Lateral Surface Area of Paraboloid, Radius of Paraboloid & Surface to Volume Ratio of Paraboloid. We can use 3 other way(s) to calculate the same, which is/are as follows -

Height of Paraboloid = (2*Volume of Paraboloid)/(pi*Radius of Paraboloid^2)
Height of Paraboloid = (2*Volume of Paraboloid)/(Total Surface Area of Paraboloid-Lateral Surface Area of Paraboloid)
Height of Paraboloid = Shape Parameter of Paraboloid*Radius of Paraboloid^2

Home

FREE PDFs

🔍 Search