Height of Magnitude of Capillary Rise Calculator

✖Surface Tension of Fluid is the energy or work required to increase the surface area of a fluid due to intermolecular forces.ⓘ Surface Tension of Fluid [γ]			+10% -10%
✖The Radius of Tubing is the radius measured to the centerline of the tube.ⓘ Radius of Tubing [R]			+10% -10%
✖Density of Fluid is defined as the mass of fluid per unit volume of the said fluid.ⓘ Density of Fluid [ρ_fluid]			+10% -10%

✖The Height of Capillary Rise/Fall is the level to which the water rises or falls in a capillary tube.ⓘ Height of Magnitude of Capillary Rise [h_c]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Capillarity and Surface Forces in Liquids (Curved Surfaces) Formula PDF PDF Image

Height of Magnitude of Capillary Rise Solution

STEP 0: Pre-Calculation Summary

Formula Used

Height of Capillary Rise/Fall = Surface Tension of Fluid/((1/2)*(Radius of Tubing*Density of Fluid*[g]))
h_c = γ/((1/2)*(R*ρ_fluid*[g]))
This formula uses 1 Constants, 4 Variables

Constants Used

[g] - Gravitational acceleration on Earth Value Taken As 9.80665

Variables Used

Height of Capillary Rise/Fall - (Measured in Meter) - The Height of Capillary Rise/Fall is the level to which the water rises or falls in a capillary tube.
Surface Tension of Fluid - (Measured in Newton per Meter) - Surface Tension of Fluid is the energy or work required to increase the surface area of a fluid due to intermolecular forces.
Radius of Tubing - (Measured in Meter) - The Radius of Tubing is the radius measured to the centerline of the tube.
Density of Fluid - (Measured in Kilogram per Cubic Meter) - Density of Fluid is defined as the mass of fluid per unit volume of the said fluid.

STEP 1: Convert Input(s) to Base Unit

Surface Tension of Fluid: 73 Millinewton per Meter --> 0.073 Newton per Meter (Check conversion here)
Radius of Tubing: 82 Millimeter --> 0.082 Meter (Check conversion here)
Density of Fluid: 14.9 Kilogram per Cubic Meter --> 14.9 Kilogram per Cubic Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h_c = γ/((1/2)*(R*ρ_fluid*[g])) --> 0.073/((1/2)*(0.082*14.9*[g]))

Evaluating ... ...

h_c = 0.0121851830982794

STEP 3: Convert Result to Output's Unit

0.0121851830982794 Meter -->12.1851830982794 Millimeter (Check conversion here)

FINAL ANSWER

12.1851830982794 ≈ 12.18518 Millimeter <-- Height of Capillary Rise/Fall

(Calculation completed in 00.020 seconds)

You are here -

Home » Chemistry » Surface Chemistry » Capillarity and Surface Forces in Liquids (Curved Surfaces) » Surface Tension » Height of Magnitude of Capillary Rise

Credits

Created by Pratibha

Amity Institute Of Applied Sciences (AIAS, Amity University), Noida, India

Pratibha has created this Calculator and 100+ more calculators!

Verified by Prerana Bakli

University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA

Prerana Bakli has verified this Calculator and 1600+ more calculators!

< Surface Tension Calculators

Surface Tension of Sea Water

LaTeX Go Surface Tension of Sea Water = Surface Tension of Pure Water*(1+(3.766*10^(-4)*Reference Salinity)+(2.347*10^(-6)*Reference Salinity*Temperature in Degree Celsius))

Surface Tension of Pure Water

LaTeX Go Surface Tension of Pure Water = 235.8*(1-(Temperature/Critical Temperature))^(1.256)*(1-(0.625*(1-(Temperature/Critical Temperature))))

Surface Tension Given Gibbs Free Energy

LaTeX Go Surface Tension of Fluid = Gibbs Free Energy/Area of Surface

Surface Tension of Methane+Hexane System

LaTeX Go Surface Tension of Methane+Hexane System = 0.64+(17.85*Concentration of Hexane)

< Important Formulas on Surface Tension Calculators

Height of Magnitude of Capillary Rise

LaTeX Go Height of Capillary Rise/Fall = Surface Tension of Fluid/((1/2)*(Radius of Tubing*Density of Fluid*[g]))

Parachor given Surface Tension

LaTeX Go Parachor = (Molar Mass/(Density of Liquid-Density of Vapor))*(Surface Tension of Fluid)^(1/4)

Surface Pressure

LaTeX Go Surface Pressure of Thin Film = Surface Tension of Clean Water Surface-Surface Tension of Fluid

Surface Tension for very Thin Plate using Wilhelmy-Plate Method

LaTeX Go Surface Tension of Fluid = Force on very Thin Plate/(2*Weight of Plate)

Height of Magnitude of Capillary Rise Formula

LaTeX Go

Height of Capillary Rise/Fall = Surface Tension of Fluid/((1/2)*(Radius of Tubing*Density of Fluid*[g]))
h_c = γ/((1/2)*(R*ρ_fluid*[g]))

What do you mean by Capillary Force?

Capillary Force is the force caused by capillary phenomena which occur at the curved surface of the interface between matter in the liquid and solid or gas phase.

How to Calculate Height of Magnitude of Capillary Rise?

Height of Magnitude of Capillary Rise calculator uses Height of Capillary Rise/Fall = Surface Tension of Fluid/((1/2)*(Radius of Tubing*Density of Fluid*[g])) to calculate the Height of Capillary Rise/Fall, The Height of Magnitude of Capillary Rise can be determined from the measured value of the radius of tubing and the known density of the fluid. Height of Capillary Rise/Fall is denoted by h_c symbol.

How to calculate Height of Magnitude of Capillary Rise using this online calculator? To use this online calculator for Height of Magnitude of Capillary Rise, enter Surface Tension of Fluid (γ), Radius of Tubing (R) & Density of Fluid (ρ_fluid) and hit the calculate button. Here is how the Height of Magnitude of Capillary Rise calculation can be explained with given input values -> 0.012185 = 0.073/((1/2)*(0.082*14.9*[g])).

FAQ

What is Height of Magnitude of Capillary Rise?

The Height of Magnitude of Capillary Rise can be determined from the measured value of the radius of tubing and the known density of the fluid and is represented as h_c = γ/((1/2)*(R*ρ_fluid*[g])) or Height of Capillary Rise/Fall = Surface Tension of Fluid/((1/2)*(Radius of Tubing*Density of Fluid*[g])). Surface Tension of Fluid is the energy or work required to increase the surface area of a fluid due to intermolecular forces, The Radius of Tubing is the radius measured to the centerline of the tube & Density of Fluid is defined as the mass of fluid per unit volume of the said fluid.

How to calculate Height of Magnitude of Capillary Rise?

The Height of Magnitude of Capillary Rise can be determined from the measured value of the radius of tubing and the known density of the fluid is calculated using Height of Capillary Rise/Fall = Surface Tension of Fluid/((1/2)*(Radius of Tubing*Density of Fluid*[g])). To calculate Height of Magnitude of Capillary Rise, you need Surface Tension of Fluid (γ), Radius of Tubing (R) & Density of Fluid (ρ_fluid). With our tool, you need to enter the respective value for Surface Tension of Fluid, Radius of Tubing & Density of Fluid and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search