Height of Key given Compressive Stress in Key Calculator

✖The Transmitted Torque by Keyed Shaft is the rotational force transferred through a keyed connection, essential for ensuring reliable power transmission in mechanical systems.ⓘ Transmitted Torque by Keyed Shaft [M_t]			+10% -10%
✖The Diameter of Shaft using Key is the measurement across the widest part of a shaft that accommodates a key for secure attachment and torque transmission.ⓘ Diameter of Shaft using Key [d_s]			+10% -10%
✖The Length of Key is the measurement of the key used in mechanical systems to secure components and transmit torque between shafts and hubs.ⓘ Length of Key [l]			+10% -10%
✖The Compressive Stress in Key is the internal stress experienced by a key due to axial loads, affecting its performance and stability in mechanical assemblies.ⓘ Compressive Stress in Key [σ_c]			+10% -10%

✖The Height of Key is the vertical measurement of a key used in mechanical design, ensuring proper fit and alignment within a machine component.ⓘ Height of Key given Compressive Stress in Key [h]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Design of Keys Formulas PDF PDF Image

Height of Key given Compressive Stress in Key Solution

STEP 0: Pre-Calculation Summary

Formula Used

Height of Key = 4*Transmitted Torque by Keyed Shaft/(Diameter of Shaft using Key*Length of Key*Compressive Stress in Key)
h = 4*M_t/(d_s*l*σ_c)
This formula uses 5 Variables

Variables Used

Height of Key - (Measured in Meter) - The Height of Key is the vertical measurement of a key used in mechanical design, ensuring proper fit and alignment within a machine component.
Transmitted Torque by Keyed Shaft - (Measured in Newton Meter) - The Transmitted Torque by Keyed Shaft is the rotational force transferred through a keyed connection, essential for ensuring reliable power transmission in mechanical systems.
Diameter of Shaft using Key - (Measured in Meter) - The Diameter of Shaft using Key is the measurement across the widest part of a shaft that accommodates a key for secure attachment and torque transmission.
Length of Key - (Measured in Meter) - The Length of Key is the measurement of the key used in mechanical systems to secure components and transmit torque between shafts and hubs.
Compressive Stress in Key - (Measured in Pascal) - The Compressive Stress in Key is the internal stress experienced by a key due to axial loads, affecting its performance and stability in mechanical assemblies.

STEP 1: Convert Input(s) to Base Unit

Transmitted Torque by Keyed Shaft: 224500 Newton Millimeter --> 224.5 Newton Meter (Check conversion here)
Diameter of Shaft using Key: 44.98998 Millimeter --> 0.04498998 Meter (Check conversion here)
Length of Key: 35 Millimeter --> 0.035 Meter (Check conversion here)
Compressive Stress in Key: 128 Newton per Square Millimeter --> 128000000 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h = 4*M_t/(d_s*l*σ_c) --> 4*224.5/(0.04498998*0.035*128000000)

Evaluating ... ...

h = 0.00445535713888801

STEP 3: Convert Result to Output's Unit

0.00445535713888801 Meter -->4.45535713888801 Millimeter (Check conversion here)

FINAL ANSWER

4.45535713888801 ≈ 4.455357 Millimeter <-- Height of Key

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design of Keys » Design of Square and Flat Keys » Height of Key given Compressive Stress in Key

Credits

Created by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has created this Calculator and 1000+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Design of Square and Flat Keys Calculators

Shear Stress in given Force on Key

LaTeX Go Shear Stress = Force on Key/(Width of Key*Length of Key)

Torque Transmitted by Keyed Shaft given Force on Keys

LaTeX Go Transmitted Torque by Keyed Shaft = Force on Key*Diameter of Shaft using Key/2

Shaft Diameter given Force on Key

LaTeX Go Diameter of Shaft using Key = 2*Transmitted Torque by Keyed Shaft/Force on Key

Force on Key

LaTeX Go Force on Key = 2*Transmitted Torque by Keyed Shaft/Diameter of Shaft using Key

Height of Key given Compressive Stress in Key Formula

LaTeX Go

Height of Key = 4*Transmitted Torque by Keyed Shaft/(Diameter of Shaft using Key*Length of Key*Compressive Stress in Key)
h = 4*M_t/(d_s*l*σ_c)

Define Compressive Stress

Compressive stress is the force that is responsible for the deformation of the material such that the volume of the material reduces. It is the stress experienced by a material which leads to a smaller volume. High compressive stress leads to failure of the material due to tension.

How to Calculate Height of Key given Compressive Stress in Key?

Height of Key given Compressive Stress in Key calculator uses Height of Key = 4*Transmitted Torque by Keyed Shaft/(Diameter of Shaft using Key*Length of Key*Compressive Stress in Key) to calculate the Height of Key, Height of Key given Compressive Stress in Key formula is defined as a method to determine the appropriate height of a key in mechanical design, ensuring it can withstand specified compressive stress without failure. This is crucial for the reliability and efficiency of machine components. Height of Key is denoted by h symbol.

How to calculate Height of Key given Compressive Stress in Key using this online calculator? To use this online calculator for Height of Key given Compressive Stress in Key, enter Transmitted Torque by Keyed Shaft (M_t), Diameter of Shaft using Key (d_s), Length of Key (l) & Compressive Stress in Key (σ_c) and hit the calculate button. Here is how the Height of Key given Compressive Stress in Key calculation can be explained with given input values -> 4500 = 4*224.5/(0.04498998*0.035*128000000).

FAQ

What is Height of Key given Compressive Stress in Key?

Height of Key given Compressive Stress in Key formula is defined as a method to determine the appropriate height of a key in mechanical design, ensuring it can withstand specified compressive stress without failure. This is crucial for the reliability and efficiency of machine components and is represented as h = 4*M_t/(d_s*l*σ_c) or Height of Key = 4*Transmitted Torque by Keyed Shaft/(Diameter of Shaft using Key*Length of Key*Compressive Stress in Key). The Transmitted Torque by Keyed Shaft is the rotational force transferred through a keyed connection, essential for ensuring reliable power transmission in mechanical systems, The Diameter of Shaft using Key is the measurement across the widest part of a shaft that accommodates a key for secure attachment and torque transmission, The Length of Key is the measurement of the key used in mechanical systems to secure components and transmit torque between shafts and hubs & The Compressive Stress in Key is the internal stress experienced by a key due to axial loads, affecting its performance and stability in mechanical assemblies.

How to calculate Height of Key given Compressive Stress in Key?

Height of Key given Compressive Stress in Key formula is defined as a method to determine the appropriate height of a key in mechanical design, ensuring it can withstand specified compressive stress without failure. This is crucial for the reliability and efficiency of machine components is calculated using Height of Key = 4*Transmitted Torque by Keyed Shaft/(Diameter of Shaft using Key*Length of Key*Compressive Stress in Key). To calculate Height of Key given Compressive Stress in Key, you need Transmitted Torque by Keyed Shaft (M_t), Diameter of Shaft using Key (d_s), Length of Key (l) & Compressive Stress in Key (σ_c). With our tool, you need to enter the respective value for Transmitted Torque by Keyed Shaft, Diameter of Shaft using Key, Length of Key & Compressive Stress in Key and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search