LCM calculator

Height Difference of Manometric Fluid for given Pressure Difference Calculator

Physics Chemistry Engineering Financial More >>

↳

Aerospace Basic Physics Mechanical Others and Extra

⤿

Aerodynamics Aircraft Mechanics Orbital Mechanics Propulsion

⤿

Fundamentals of Inviscid and Incompressible Flow Compressible Flow Three Dimensional Incompressible Flow Two Dimensional Incompressible Flow

⤿

Aerodynamic Measurements and Wind Tunnel Testing Bernoulli's Equation and Pressure Concepts

✖Pressure Difference indicates the variance in pressure levels between the supply reservoir and the test area.ⓘ Pressure Difference [δP]			+10% -10%
✖Specific Weight of Manometric Fluid represents the weight per unit volume of the fluid used in a manometer.ⓘ Specific Weight of Manometric Fluid [𝑤]			+10% -10%

✖Height Difference of Manometric Fluid denotes the variation in vertical height of a manometric fluid column.ⓘ Height Difference of Manometric Fluid for given Pressure Difference [Δh]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Fundamentals of Inviscid and Incompressible Flow Formulas PDF PDF Image

Height Difference of Manometric Fluid for given Pressure Difference Solution

STEP 0: Pre-Calculation Summary

Formula Used

Height Difference of Manometric Fluid = Pressure Difference/Specific Weight of Manometric Fluid
Δh = δP/𝑤
This formula uses 3 Variables

Variables Used

Height Difference of Manometric Fluid - (Measured in Meter) - Height Difference of Manometric Fluid denotes the variation in vertical height of a manometric fluid column.
Pressure Difference - (Measured in Pascal) - Pressure Difference indicates the variance in pressure levels between the supply reservoir and the test area.
Specific Weight of Manometric Fluid - (Measured in Newton per Cubic Meter) - Specific Weight of Manometric Fluid represents the weight per unit volume of the fluid used in a manometer.

STEP 1: Convert Input(s) to Base Unit

Pressure Difference: 0.2088 Pascal --> 0.2088 Pascal No Conversion Required
Specific Weight of Manometric Fluid: 2 Newton per Cubic Meter --> 2 Newton per Cubic Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Δh = δP/𝑤 --> 0.2088/2

Evaluating ... ...

Δh = 0.1044

STEP 3: Convert Result to Output's Unit

0.1044 Meter --> No Conversion Required

FINAL ANSWER

0.1044 Meter <-- Height Difference of Manometric Fluid

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Aerodynamics » Fundamentals of Inviscid and Incompressible Flow » Aerospace » Aerodynamic Measurements and Wind Tunnel Testing » Height Difference of Manometric Fluid for given Pressure Difference

Credits

Created by Shikha Maurya

Indian Institute of Technology (IIT), Bombay

Shikha Maurya has created this Calculator and 100+ more calculators!

Verified by Vinay Mishra

Indian Institute for Aeronautical Engineering and Information Technology (IIAEIT), Pune

Vinay Mishra has verified this Calculator and 100+ more calculators!

< Aerodynamic Measurements and Wind Tunnel Testing Calculators

Wind Tunnel Test Section Velocity

LaTeX Go Velocity at Point 2 = sqrt((2*(Pressure at Point 1-Pressure at Point 2))/(Density*(1-1/Contraction Ratio^2)))

Airspeed Measurement by Venturi

LaTeX Go Velocity at Point 1 = sqrt((2*(Pressure at Point 1-Pressure at Point 2))/(Density*(Contraction Ratio^2-1)))

Wind Tunnel Pressure Difference with Test Speed

LaTeX Go Pressure Difference = 0.5*Air Density*Velocity at Point 2^2*(1-1/Contraction Ratio^2)

Wind Tunnel Pressure Difference by Manometer

LaTeX Go Pressure Difference = Specific Weight of Manometric Fluid*Height Difference of Manometric Fluid

Height Difference of Manometric Fluid for given Pressure Difference Formula

LaTeX Go

Height Difference of Manometric Fluid = Pressure Difference/Specific Weight of Manometric Fluid
Δh = δP/𝑤

How to measure airspeed by venturi?

Insert the venturi (of the given inlet to throat area ratio) into an airstream that has an unknown velocity. To measure the velocity, place the pressure taps (a small hole) on the wall of the venturi at both the inlet and the throat and connect the pressure leads (tubes) from these holes across a differential pressure gage, or to both sides of a U-tube manometer. The pressure difference can be related to unknown velocity by Bernoulli's principle.

Do you know who used the first practical airspeed indicator on an airplane?

The first practical airspeed indicator on an airplane was a venturi used by the French Captain A. Eteve in January 1911, more than 7 years after the Wright brothers' first powered flight.

How to Calculate Height Difference of Manometric Fluid for given Pressure Difference?

Height Difference of Manometric Fluid for given Pressure Difference calculator uses Height Difference of Manometric Fluid = Pressure Difference/Specific Weight of Manometric Fluid to calculate the Height Difference of Manometric Fluid, Height difference of manometric fluid for given pressure difference is obtained as the ratio of pressure difference to the weight per unit volume of the manometer fluid. Height Difference of Manometric Fluid is denoted by Δh symbol.

How to calculate Height Difference of Manometric Fluid for given Pressure Difference using this online calculator? To use this online calculator for Height Difference of Manometric Fluid for given Pressure Difference, enter Pressure Difference (δP) & Specific Weight of Manometric Fluid (𝑤) and hit the calculate button. Here is how the Height Difference of Manometric Fluid for given Pressure Difference calculation can be explained with given input values -> 0.000418 = 0.2088/2.

FAQ

What is Height Difference of Manometric Fluid for given Pressure Difference?

Height difference of manometric fluid for given pressure difference is obtained as the ratio of pressure difference to the weight per unit volume of the manometer fluid and is represented as Δh = δP/𝑤 or Height Difference of Manometric Fluid = Pressure Difference/Specific Weight of Manometric Fluid. Pressure Difference indicates the variance in pressure levels between the supply reservoir and the test area & Specific Weight of Manometric Fluid represents the weight per unit volume of the fluid used in a manometer.

How to calculate Height Difference of Manometric Fluid for given Pressure Difference?

Height difference of manometric fluid for given pressure difference is obtained as the ratio of pressure difference to the weight per unit volume of the manometer fluid is calculated using Height Difference of Manometric Fluid = Pressure Difference/Specific Weight of Manometric Fluid. To calculate Height Difference of Manometric Fluid for given Pressure Difference, you need Pressure Difference (δP) & Specific Weight of Manometric Fluid (𝑤). With our tool, you need to enter the respective value for Pressure Difference & Specific Weight of Manometric Fluid and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search