Height at Outlet Zone with respect to Area of Tank Calculator

✖The Falling Speed refers to the constant speed at which a particle falls through a fluid when the force of gravity is balanced by the drag force and buoyant force acting on the particle.ⓘ Falling Speed [v^']			+10% -10%
✖The Height of Crack refers to the size of a flaw or crack in a material that can lead to catastrophic failure under a given stress.ⓘ Height of Crack [h]			+10% -10%
✖The Area of a sedimentation tank refers to the surface area of the tank where sedimentation, or the settling of suspended particles, occurs.ⓘ Area [A]			+10% -10%
✖The Discharge refers to the volume of fluid (usually water) that flows through a given cross-sectional area per unit of time.ⓘ Discharge [Q]			+10% -10%

✖The Outer Height refers to the external vertical dimension of an object or structure.ⓘ Height at Outlet Zone with respect to Area of Tank [H]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Treatment of Water 1 Sedimentation Formula PDF PDF Image

Height at Outlet Zone with respect to Area of Tank Solution

STEP 0: Pre-Calculation Summary

Formula Used

Outer Height = Falling Speed*Height of Crack*Area/Discharge
H = v^'*h*A/Q
This formula uses 5 Variables

Variables Used

Outer Height - (Measured in Meter) - The Outer Height refers to the external vertical dimension of an object or structure.
Falling Speed - (Measured in Meter per Second) - The Falling Speed refers to the constant speed at which a particle falls through a fluid when the force of gravity is balanced by the drag force and buoyant force acting on the particle.
Height of Crack - (Measured in Meter) - The Height of Crack refers to the size of a flaw or crack in a material that can lead to catastrophic failure under a given stress.
Area - (Measured in Square Meter) - The Area of a sedimentation tank refers to the surface area of the tank where sedimentation, or the settling of suspended particles, occurs.
Discharge - (Measured in Cubic Meter per Second) - The Discharge refers to the volume of fluid (usually water) that flows through a given cross-sectional area per unit of time.

STEP 1: Convert Input(s) to Base Unit

Falling Speed: 0.1 Meter per Second --> 0.1 Meter per Second No Conversion Required
Height of Crack: 12000 Millimeter --> 12 Meter (Check conversion here)
Area: 50 Square Meter --> 50 Square Meter No Conversion Required
Discharge: 1.01 Cubic Meter per Second --> 1.01 Cubic Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

H = v^'*h*A/Q --> 0.1*12*50/1.01

Evaluating ... ...

H = 59.4059405940594

STEP 3: Convert Result to Output's Unit

59.4059405940594 Meter --> No Conversion Required

FINAL ANSWER

59.4059405940594 ≈ 59.40594 Meter <-- Outer Height

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Treatment of Water 1 Sedimentation » Height at Outlet Zone » Height at Outlet Zone with respect to Area of Tank

Credits

Created by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has created this Calculator and 500+ more calculators!

Verified by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has verified this Calculator and 500+ more calculators!

< Height at Outlet Zone Calculators

Height at Outlet Zone with respect to Discharge

LaTeX Go Outer Height = (Length*Width*Height of Crack*Falling Speed)/Discharge

Height at Outlet Zone with respect to Area of Tank

LaTeX Go Outer Height = Falling Speed*Height of Crack*Area/Discharge

Height at Outlet Zone given Falling Speed of Smaller Particle

LaTeX Go Outer Height = Falling Speed*Detention Time h

Height at Outlet Zone given Ratio of Removal with respect to Tank Height

LaTeX Go Outer Height = Removal Ratio*Height of Crack

Height at Outlet Zone with respect to Area of Tank Formula

LaTeX Go

Outer Height = Falling Speed*Height of Crack*Area/Discharge
H = v^'*h*A/Q

What is sedimentation?

Sedimentation is the tendency for particles in suspension to settle out of the fluid in which they are entrained and come to rest against a barrier. This is due to their motion through the fluid in response to the forces acting on them: these forces can be due to gravity, centrifugal acceleration, or electromagnetism.

How to Calculate Height at Outlet Zone with respect to Area of Tank?

Height at Outlet Zone with respect to Area of Tank calculator uses Outer Height = Falling Speed*Height of Crack*Area/Discharge to calculate the Outer Height, The Height at Outlet Zone with respect to Area of Tank formula is defined as the distance from the top to the bottom of the tank at outlet zone. Outer Height is denoted by H symbol.

How to calculate Height at Outlet Zone with respect to Area of Tank using this online calculator? To use this online calculator for Height at Outlet Zone with respect to Area of Tank, enter Falling Speed (v^'), Height of Crack (h), Area (A) & Discharge (Q) and hit the calculate button. Here is how the Height at Outlet Zone with respect to Area of Tank calculation can be explained with given input values -> 59.40594 = 0.1*12*50/1.01.

FAQ

What is Height at Outlet Zone with respect to Area of Tank?

The Height at Outlet Zone with respect to Area of Tank formula is defined as the distance from the top to the bottom of the tank at outlet zone and is represented as H = v^'*h*A/Q or Outer Height = Falling Speed*Height of Crack*Area/Discharge. The Falling Speed refers to the constant speed at which a particle falls through a fluid when the force of gravity is balanced by the drag force and buoyant force acting on the particle, The Height of Crack refers to the size of a flaw or crack in a material that can lead to catastrophic failure under a given stress, The Area of a sedimentation tank refers to the surface area of the tank where sedimentation, or the settling of suspended particles, occurs & The Discharge refers to the volume of fluid (usually water) that flows through a given cross-sectional area per unit of time.

How to calculate Height at Outlet Zone with respect to Area of Tank?

The Height at Outlet Zone with respect to Area of Tank formula is defined as the distance from the top to the bottom of the tank at outlet zone is calculated using Outer Height = Falling Speed*Height of Crack*Area/Discharge. To calculate Height at Outlet Zone with respect to Area of Tank, you need Falling Speed (v^'), Height of Crack (h), Area (A) & Discharge (Q). With our tool, you need to enter the respective value for Falling Speed, Height of Crack, Area & Discharge and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Outer Height?

In this formula, Outer Height uses Falling Speed, Height of Crack, Area & Discharge. We can use 3 other way(s) to calculate the same, which is/are as follows -

Outer Height = Falling Speed*Detention Time h
Outer Height = (Length*Width*Height of Crack*Falling Speed)/Discharge
Outer Height = Removal Ratio*Height of Crack

Home

FREE PDFs

🔍 Search