Heat Transfer takes place from vapour refrigerant to outside of tube Solution

STEP 0: Pre-Calculation Summary
Formula Used
Heat Transfer = Coefficient of Heat Transfer*Area*(Vapour condensing film temperature-Outside Surface Temperature)
q = h*A*(T1-T2)
This formula uses 5 Variables
Variables Used
Heat Transfer - (Measured in Watt) - Heat Transfer is the amount of heat that is transferred per unit of time in some material, usually measured in watts (joules per second).
Coefficient of Heat Transfer - (Measured in Watt per Square Meter per Kelvin) - The Coefficient of Heat Transfer is the heat transferred per unit area per kelvin. Thus area is included in the equation as it represents the area over which the transfer of heat takes place.
Area - (Measured in Square Meter) - The area is the amount of two-dimensional space taken up by an object.
Vapour condensing film temperature - (Measured in Kelvin) - The Vapour condensing film temperature is the temperature of refrigerant vapour condensing film.
Outside Surface Temperature - (Measured in Kelvin) - Outside Surface Temperature is the Temperature at the outside surface of the tube.
STEP 1: Convert Input(s) to Base Unit
Coefficient of Heat Transfer: 13.2 Watt per Square Meter per Kelvin --> 13.2 Watt per Square Meter per Kelvin No Conversion Required
Area: 50 Square Meter --> 50 Square Meter No Conversion Required
Vapour condensing film temperature: 300 Kelvin --> 300 Kelvin No Conversion Required
Outside Surface Temperature: 310 Kelvin --> 310 Kelvin No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
q = h*A*(T1-T2) --> 13.2*50*(300-310)
Evaluating ... ...
q = -6600
STEP 3: Convert Result to Output's Unit
-6600 Watt --> No Conversion Required
FINAL ANSWER
-6600 Watt <-- Heat Transfer
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Vishwakarma Institute of Information Technology, Pune (VIIT Pune), Pune
Abhishek Dharmendra Bansile has created this Calculator and 100+ more calculators!
Verifier Image
Verified by sanjay shiva
national institute of technology hamirpur (NITH ), hamirpur , himachal pradesh
sanjay shiva has verified this Calculator and 100+ more calculators!

Heat Transfer Calculators

Heat Rejection Factor
​ LaTeX ​ Go Heat Rejection Factor = (Refrigeration Capacity+Compressor Work Done)/Refrigeration Capacity
Refrigeration Capacity given Load on Condenser
​ LaTeX ​ Go Refrigeration Capacity = Load on Condenser-Compressor Work Done
Load on Condenser
​ LaTeX ​ Go Load on Condenser = Refrigeration Capacity+Compressor Work Done
Heat Rejection Factor given COP
​ LaTeX ​ Go Heat Rejection Factor = 1+(1/Coefficient of Performance of Refrigerator)

Heat Transfer takes place from vapour refrigerant to outside of tube Formula

​LaTeX ​Go
Heat Transfer = Coefficient of Heat Transfer*Area*(Vapour condensing film temperature-Outside Surface Temperature)
q = h*A*(T1-T2)

What is Condenser Capacity and Factor Affecting on it?

The condenser capacity is the ability of the condenser to transfer heat from the hot vapour refrigerant to the condensing medium. The heat transfer capacity of a condenser depends upon following factors:
1. Material
2. Amount of Contact
3. Temperature Difference

How to Calculate Heat Transfer takes place from vapour refrigerant to outside of tube?

Heat Transfer takes place from vapour refrigerant to outside of tube calculator uses Heat Transfer = Coefficient of Heat Transfer*Area*(Vapour condensing film temperature-Outside Surface Temperature) to calculate the Heat Transfer, Heat Transfer takes place from vapour refrigerant to outside of tube formula is defined as the rate of heat exchange between the refrigerant and the outer surface of the tube, which is a critical factor in refrigeration systems, where heat is transferred from the hot refrigerant vapour to the cooler surroundings. Heat Transfer is denoted by q symbol.

How to calculate Heat Transfer takes place from vapour refrigerant to outside of tube using this online calculator? To use this online calculator for Heat Transfer takes place from vapour refrigerant to outside of tube, enter Coefficient of Heat Transfer (h), Area (A), Vapour condensing film temperature (T1) & Outside Surface Temperature (T2) and hit the calculate button. Here is how the Heat Transfer takes place from vapour refrigerant to outside of tube calculation can be explained with given input values -> -6600 = 13.2*50*(300-310).

FAQ

What is Heat Transfer takes place from vapour refrigerant to outside of tube?
Heat Transfer takes place from vapour refrigerant to outside of tube formula is defined as the rate of heat exchange between the refrigerant and the outer surface of the tube, which is a critical factor in refrigeration systems, where heat is transferred from the hot refrigerant vapour to the cooler surroundings and is represented as q = h*A*(T1-T2) or Heat Transfer = Coefficient of Heat Transfer*Area*(Vapour condensing film temperature-Outside Surface Temperature). The Coefficient of Heat Transfer is the heat transferred per unit area per kelvin. Thus area is included in the equation as it represents the area over which the transfer of heat takes place, The area is the amount of two-dimensional space taken up by an object, The Vapour condensing film temperature is the temperature of refrigerant vapour condensing film & Outside Surface Temperature is the Temperature at the outside surface of the tube.
How to calculate Heat Transfer takes place from vapour refrigerant to outside of tube?
Heat Transfer takes place from vapour refrigerant to outside of tube formula is defined as the rate of heat exchange between the refrigerant and the outer surface of the tube, which is a critical factor in refrigeration systems, where heat is transferred from the hot refrigerant vapour to the cooler surroundings is calculated using Heat Transfer = Coefficient of Heat Transfer*Area*(Vapour condensing film temperature-Outside Surface Temperature). To calculate Heat Transfer takes place from vapour refrigerant to outside of tube, you need Coefficient of Heat Transfer (h), Area (A), Vapour condensing film temperature (T1) & Outside Surface Temperature (T2). With our tool, you need to enter the respective value for Coefficient of Heat Transfer, Area, Vapour condensing film temperature & Outside Surface Temperature and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Heat Transfer?
In this formula, Heat Transfer uses Coefficient of Heat Transfer, Area, Vapour condensing film temperature & Outside Surface Temperature. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Heat Transfer = Overall Heat Transfer Coefficient*Surface Area*Temperature Difference
  • Heat Transfer = Temperature Difference/Thermal Resistance
  • Heat Transfer = (Thermal Conductivity*Surface Area*(Outside Surface Temperature-Inside Surface temperature))/Tube Thickness
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!