Heat transfer surface area for unit length of matrix in storage type heat exchanger Calculator

✖Location factor the sum of all factors that an enterprise considers when choosing a location, for setting up a heat exchanger.ⓘ Location factor [E]			+10% -10%
✖Specific heat of fluid is the amount f heat required to increase the temperature of the fluid by one degree.ⓘ Specific heat of fluid [c]			+10% -10%
✖Mass flowrate is the mass moved in unit amount of time.ⓘ Mass Flowrate [m]			+10% -10%
✖Convective Heat Transfer Coefficient is the heat transfer due to convection.ⓘ Convective Heat Transfer Coefficient [h_Conv]			+10% -10%
✖Distance from Point to YY Axis is the distance from the point to the YY axis where stress is to be computed.ⓘ Distance from Point to YY Axis [x]			+10% -10%

✖The Surface Area of a three-dimensional shape is the sum of all of the surface areas of each of the sides.ⓘ Heat transfer surface area for unit length of matrix in storage type heat exchanger [SA]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Heat and Mass Transfer Formula PDF PDF Image

Heat transfer surface area for unit length of matrix in storage type heat exchanger Solution

STEP 0: Pre-Calculation Summary

Formula Used

Surface Area = (Location factor*Specific heat of fluid*Mass Flowrate)/(Convective Heat Transfer Coefficient*Distance from Point to YY Axis)
SA = (E*c*m)/(h_Conv*x)
This formula uses 6 Variables

Variables Used

Surface Area - (Measured in Square Meter) - The Surface Area of a three-dimensional shape is the sum of all of the surface areas of each of the sides.
Location factor - Location factor the sum of all factors that an enterprise considers when choosing a location, for setting up a heat exchanger.
Specific heat of fluid - (Measured in Joule per Kilogram per K) - Specific heat of fluid is the amount f heat required to increase the temperature of the fluid by one degree.
Mass Flowrate - (Measured in Kilogram per Second) - Mass flowrate is the mass moved in unit amount of time.
Convective Heat Transfer Coefficient - (Measured in Watt per Square Meter per Kelvin) - Convective Heat Transfer Coefficient is the heat transfer due to convection.
Distance from Point to YY Axis - (Measured in Meter) - Distance from Point to YY Axis is the distance from the point to the YY axis where stress is to be computed.

STEP 1: Convert Input(s) to Base Unit

Location factor: 10 --> No Conversion Required
Specific heat of fluid: 10 Joule per Kilogram per K --> 10 Joule per Kilogram per K No Conversion Required
Mass Flowrate: 12 Kilogram per Second --> 12 Kilogram per Second No Conversion Required
Convective Heat Transfer Coefficient: 0.5 Watt per Square Meter per Kelvin --> 0.5 Watt per Square Meter per Kelvin No Conversion Required
Distance from Point to YY Axis: 1.5 Meter --> 1.5 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

SA = (E*c*m)/(h_Conv*x) --> (10*10*12)/(0.5*1.5)

Evaluating ... ...

SA = 1600

STEP 3: Convert Result to Output's Unit

1600 Square Meter --> No Conversion Required

FINAL ANSWER

1600 Square Meter <-- Surface Area

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Heat and Mass Transfer » Heat Exchanger » Mechanical » Thermal Parameters of Heat Exchanger » Heat transfer surface area for unit length of matrix in storage type heat exchanger

Credits

Created by Nishan Poojary

Shri Madhwa Vadiraja Institute of Technology and Management (SMVITM), Udupi

Nishan Poojary has created this Calculator and 500+ more calculators!

Verified by Sagar S Kulkarni

Dayananda Sagar College of Engineering (DSCE), Bengaluru

Sagar S Kulkarni has verified this Calculator and 200+ more calculators!

< Thermal Parameters of Heat Exchanger Calculators

Logarithmic mean temperature difference for single pass counter flow

LaTeX Go Logarithmic Mean Temperature Difference = ((Entry Temperature of Hot Fluid-Exit Temperature of Cold Fluid)-(Entry Temperature of Cold Fluid-Exit Temperature of Hot Fluid))/ln((Entry Temperature of Hot Fluid-Exit Temperature of Cold Fluid)/(Entry Temperature of Cold Fluid-Exit Temperature of Hot Fluid))

Overall heat transfer coefficient given LMTD

LaTeX Go Overall Heat Transfer Coefficient = Heat exchanged/(Correction Factor*Area*Logarithmic Mean Temperature Difference)

Logarithmic mean temperature difference

LaTeX Go Logarithmic Mean Temperature Difference = Heat exchanged/(Correction Factor*Overall Heat Transfer Coefficient*Area)

Heat exchanged

LaTeX Go Heat exchanged = Correction Factor*Overall Heat Transfer Coefficient*Area*Logarithmic Mean Temperature Difference

Heat transfer surface area for unit length of matrix in storage type heat exchanger Formula

LaTeX Go

Surface Area = (Location factor*Specific heat of fluid*Mass Flowrate)/(Convective Heat Transfer Coefficient*Distance from Point to YY Axis)
SA = (E*c*m)/(h_Conv*x)

What is Heat exchanger

A heat exchanger is a system used to transfer heat between two or more fluids. Heat exchangers are used in both cooling and heating processes. The fluids may be separated by a solid wall to prevent mixing or they may be in direct contact. They are widely used in space heating, refrigeration, air conditioning, power stations, chemical plants, petrochemical plants, petroleum refineries, natural-gas processing, and sewage treatment. The classic example of a heat exchanger is found in an internal combustion engine in which a circulating fluid known as engine coolant flows through radiator coils and air flows past the coils, which cools the coolant and heats the incoming air. Another example is the heat sink, which is a passive heat exchanger that transfers the heat generated by an electronic or a mechanical device to a fluid medium, often air or a liquid coolant.

How to Calculate Heat transfer surface area for unit length of matrix in storage type heat exchanger?

Heat transfer surface area for unit length of matrix in storage type heat exchanger calculator uses Surface Area = (Location factor*Specific heat of fluid*Mass Flowrate)/(Convective Heat Transfer Coefficient*Distance from Point to YY Axis) to calculate the Surface Area, The Heat transfer surface area for unit length of matrix in storage type heat exchanger formula is defined as the total area that the surface of the heat exchanger occupies. Surface Area is denoted by SA symbol.

How to calculate Heat transfer surface area for unit length of matrix in storage type heat exchanger using this online calculator? To use this online calculator for Heat transfer surface area for unit length of matrix in storage type heat exchanger, enter Location factor (E), Specific heat of fluid (c), Mass Flowrate (m), Convective Heat Transfer Coefficient (h_Conv) & Distance from Point to YY Axis (x) and hit the calculate button. Here is how the Heat transfer surface area for unit length of matrix in storage type heat exchanger calculation can be explained with given input values -> 1600 = (10*10*12)/(0.5*1.5).

FAQ

What is Heat transfer surface area for unit length of matrix in storage type heat exchanger?

The Heat transfer surface area for unit length of matrix in storage type heat exchanger formula is defined as the total area that the surface of the heat exchanger occupies and is represented as SA = (E*c*m)/(h_Conv*x) or Surface Area = (Location factor*Specific heat of fluid*Mass Flowrate)/(Convective Heat Transfer Coefficient*Distance from Point to YY Axis). Location factor the sum of all factors that an enterprise considers when choosing a location, for setting up a heat exchanger, Specific heat of fluid is the amount f heat required to increase the temperature of the fluid by one degree, Mass flowrate is the mass moved in unit amount of time, Convective Heat Transfer Coefficient is the heat transfer due to convection & Distance from Point to YY Axis is the distance from the point to the YY axis where stress is to be computed.

How to calculate Heat transfer surface area for unit length of matrix in storage type heat exchanger?

The Heat transfer surface area for unit length of matrix in storage type heat exchanger formula is defined as the total area that the surface of the heat exchanger occupies is calculated using Surface Area = (Location factor*Specific heat of fluid*Mass Flowrate)/(Convective Heat Transfer Coefficient*Distance from Point to YY Axis). To calculate Heat transfer surface area for unit length of matrix in storage type heat exchanger, you need Location factor (E), Specific heat of fluid (c), Mass Flowrate (m), Convective Heat Transfer Coefficient (h_Conv) & Distance from Point to YY Axis (x). With our tool, you need to enter the respective value for Location factor, Specific heat of fluid, Mass Flowrate, Convective Heat Transfer Coefficient & Distance from Point to YY Axis and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Surface Area?

In this formula, Surface Area uses Location factor, Specific heat of fluid, Mass Flowrate, Convective Heat Transfer Coefficient & Distance from Point to YY Axis. We can use 1 other way(s) to calculate the same, which is/are as follows -

Surface Area = (Time Factor*Specific heat of matrix material*Mass of Solid)/(Convective Heat Transfer Coefficient*Total Time Taken)

Home

FREE PDFs

🔍 Search