Heat Transfer Rate for Condensation of Superheated Vapors Calculator

✖Average Heat Transfer Coefficient is equal to the heat flow (Q) across the heat-transfer surface divided by the average temperature (Δt) and the area of the heat-transfer surface (A).ⓘ Average Heat Transfer Coefficient [h ̅]			+10% -10%
✖The area of plate is the amount of two-dimensional space taken up by plate through which heat exchange take place.ⓘ Area of Plate [A_plate]			+10% -10%
✖Saturation Temperature for Superheated Vapor is the temperature corresponding to saturated pressure of the superheated vapor.ⓘ Saturation Temperature for Superheated Vapor [T_s']			+10% -10%
✖Plate Surface Temperature is the temperature at the surface of the plate.ⓘ Plate Surface Temperature [T_w]			+10% -10%

✖Heat Transfer is the amount of heat that is transferred per unit of time in some material, usually measured in watts (joules per second).ⓘ Heat Transfer Rate for Condensation of Superheated Vapors [q]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Boiling and Condensation Formula PDF PDF Image

Heat Transfer Rate for Condensation of Superheated Vapors Solution

STEP 0: Pre-Calculation Summary

Formula Used

Heat Transfer = Average Heat Transfer Coefficient*Area of Plate*(Saturation Temperature for Superheated Vapor-Plate Surface Temperature)
q = h ̅*A_plate*(T_s'-T_w)
This formula uses 5 Variables

Variables Used

Heat Transfer - (Measured in Watt) - Heat Transfer is the amount of heat that is transferred per unit of time in some material, usually measured in watts (joules per second).
Average Heat Transfer Coefficient - (Measured in Watt per Square Meter per Kelvin) - Average Heat Transfer Coefficient is equal to the heat flow (Q) across the heat-transfer surface divided by the average temperature (Δt) and the area of the heat-transfer surface (A).
Area of Plate - (Measured in Square Meter) - The area of plate is the amount of two-dimensional space taken up by plate through which heat exchange take place.
Saturation Temperature for Superheated Vapor - (Measured in Kelvin) - Saturation Temperature for Superheated Vapor is the temperature corresponding to saturated pressure of the superheated vapor.
Plate Surface Temperature - (Measured in Kelvin) - Plate Surface Temperature is the temperature at the surface of the plate.

STEP 1: Convert Input(s) to Base Unit

Average Heat Transfer Coefficient: 115 Watt per Square Meter per Kelvin --> 115 Watt per Square Meter per Kelvin No Conversion Required
Area of Plate: 35.6 Square Meter --> 35.6 Square Meter No Conversion Required
Saturation Temperature for Superheated Vapor: 89 Kelvin --> 89 Kelvin No Conversion Required
Plate Surface Temperature: 82 Kelvin --> 82 Kelvin No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

q = h ̅*A_plate*(T_s'-T_w) --> 115*35.6*(89-82)

Evaluating ... ...

q = 28658

STEP 3: Convert Result to Output's Unit

28658 Watt --> No Conversion Required

FINAL ANSWER

28658 Watt <-- Heat Transfer

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Chemical Engineering » Heat Transfer » Boiling and Condensation » Important Formulas of Condensation Number, Average Heat Transfer Coefficient and Heat Flux » Heat Transfer Rate for Condensation of Superheated Vapors

Credits

Created by Ayush gupta

University School of Chemical Technology-USCT (GGSIPU), New Delhi

Ayush gupta has created this Calculator and 300+ more calculators!

Verified by Soupayan banerjee

National University of Judicial Science (NUJS), Kolkata

Soupayan banerjee has verified this Calculator and 900+ more calculators!

< Important Formulas of Condensation Number, Average Heat Transfer Coefficient and Heat Flux Calculators

Condensation Number given Reynolds Number

LaTeX Go Condensation Number = ((Constant for Condensation Number)^(4/3))*(((4*sin(Inclination Angle)*((Cross Sectional Area of Flow/Wetted Perimeter)))/(Length of Plate))^(1/3))*((Reynolds Number of Film)^(-1/3))

Condensation Number

LaTeX Go Condensation Number = (Average Heat Transfer Coefficient)*((((Viscosity of Film)^2)/((Thermal Conductivity^3)*(Density of Liquid Film)*(Density of Liquid Film-Density of Vapor)*[g]))^(1/3))

Condensation Number for Horizontal Cylinder

LaTeX Go Condensation Number = 1.514*((Reynolds Number of Film)^(-1/3))

Condensation Number for Vertical Plate

LaTeX Go Condensation Number = 1.47*((Reynolds Number of Film)^(-1/3))

< Condensation Calculators

Condensation Number

LaTeX Go Condensation Number = (Average Heat Transfer Coefficient)*((((Viscosity of Film)^2)/((Thermal Conductivity^3)*(Density of Liquid Film)*(Density of Liquid Film-Density of Vapor)*[g]))^(1/3))

Film Thickness given Mass Flow of Condensate

LaTeX Go Film Thickness = ((3*Viscosity of Film*Mass Flow Rate)/(Density of Liquid*(Density of Liquid-Density of Vapor)*[g]))^(1/3)

Condensation Number for Horizontal Cylinder

LaTeX Go Condensation Number = 1.514*((Reynolds Number of Film)^(-1/3))

Condensation Number for Vertical Plate

LaTeX Go Condensation Number = 1.47*((Reynolds Number of Film)^(-1/3))

Heat Transfer Rate for Condensation of Superheated Vapors Formula

LaTeX Go

Heat Transfer = Average Heat Transfer Coefficient*Area of Plate*(Saturation Temperature for Superheated Vapor-Plate Surface Temperature)
q = h ̅*A_plate*(T_s'-T_w)

What is Heat Transfer?

Heat transfer is a discipline of thermal engineering that concerns the generation, use, conversion, and exchange of thermal energy between physical systems. Heat transfer is classified into various mechanisms, such as thermal conduction, thermal convection, thermal radiation, and transfer of energy by phase changes.

Define Thermal Conductivity & Factors affecting it?

Thermal conductivity is defined as the ability of a substance to conduct heat. Factors Affecting The Thermal Conductivity are: Moisture, Density of material, Pressure, Temperature & Structure of material.

How to Calculate Heat Transfer Rate for Condensation of Superheated Vapors?

Heat Transfer Rate for Condensation of Superheated Vapors calculator uses Heat Transfer = Average Heat Transfer Coefficient*Area of Plate*(Saturation Temperature for Superheated Vapor-Plate Surface Temperature) to calculate the Heat Transfer, The Heat Transfer Rate for Condensation of Superheated Vapors formula is defined as the product of heat transfer coefficient, area, difference of temperature of superheated vapor and temperature of plate at which vapors are being condensed. The formula is approximately same as Newton's law of cooling. Heat Transfer is denoted by q symbol.

How to calculate Heat Transfer Rate for Condensation of Superheated Vapors using this online calculator? To use this online calculator for Heat Transfer Rate for Condensation of Superheated Vapors, enter Average Heat Transfer Coefficient (h ̅), Area of Plate (A_plate), Saturation Temperature for Superheated Vapor (T_s') & Plate Surface Temperature (T_w) and hit the calculate button. Here is how the Heat Transfer Rate for Condensation of Superheated Vapors calculation can be explained with given input values -> 28658 = 115*35.6*(89-82).

FAQ

What is Heat Transfer Rate for Condensation of Superheated Vapors?

The Heat Transfer Rate for Condensation of Superheated Vapors formula is defined as the product of heat transfer coefficient, area, difference of temperature of superheated vapor and temperature of plate at which vapors are being condensed. The formula is approximately same as Newton's law of cooling and is represented as q = h ̅*A_plate*(T_s'-T_w) or Heat Transfer = Average Heat Transfer Coefficient*Area of Plate*(Saturation Temperature for Superheated Vapor-Plate Surface Temperature). Average Heat Transfer Coefficient is equal to the heat flow (Q) across the heat-transfer surface divided by the average temperature (Δt) and the area of the heat-transfer surface (A), The area of plate is the amount of two-dimensional space taken up by plate through which heat exchange take place, Saturation Temperature for Superheated Vapor is the temperature corresponding to saturated pressure of the superheated vapor & Plate Surface Temperature is the temperature at the surface of the plate.

How to calculate Heat Transfer Rate for Condensation of Superheated Vapors?

The Heat Transfer Rate for Condensation of Superheated Vapors formula is defined as the product of heat transfer coefficient, area, difference of temperature of superheated vapor and temperature of plate at which vapors are being condensed. The formula is approximately same as Newton's law of cooling is calculated using Heat Transfer = Average Heat Transfer Coefficient*Area of Plate*(Saturation Temperature for Superheated Vapor-Plate Surface Temperature). To calculate Heat Transfer Rate for Condensation of Superheated Vapors, you need Average Heat Transfer Coefficient (h ̅), Area of Plate (A_plate), Saturation Temperature for Superheated Vapor (T_s') & Plate Surface Temperature (T_w). With our tool, you need to enter the respective value for Average Heat Transfer Coefficient, Area of Plate, Saturation Temperature for Superheated Vapor & Plate Surface Temperature and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search