Head when Discharge for Triangular Weir Angle is 90 Calculator

✖Discharge through Triangular Weir is discharge calculated considering the channel as triangular.ⓘ Discharge through Triangular Weir [Q_tri]			+10% -10%
✖The Coefficient of Discharge is ratio of actual discharge to theoretical discharge.ⓘ Coefficient of Discharge [C_d]			+10% -10%
✖The Acceleration due to Gravity is acceleration gained by an object because of gravitational force.ⓘ Acceleration due to Gravity [g]			+10% -10%

✖Height of Water above Crest of Weir is defined as the water surface height above crest.ⓘ Head when Discharge for Triangular Weir Angle is 90 [S_w]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Flow Over a Trapizoidal and Triangular Weir or Notch Formulas PDF PDF Image

Head when Discharge for Triangular Weir Angle is 90 Solution

STEP 0: Pre-Calculation Summary

Formula Used

Height of Water above Crest of Weir = Discharge through Triangular Weir/((8/15)*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity))^(2/5)
S_w = Q_tri/((8/15)*C_d*sqrt(2*g))^(2/5)
This formula uses 1 Functions, 4 Variables

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Height of Water above Crest of Weir - (Measured in Meter) - Height of Water above Crest of Weir is defined as the water surface height above crest.
Discharge through Triangular Weir - (Measured in Cubic Meter per Second) - Discharge through Triangular Weir is discharge calculated considering the channel as triangular.
Coefficient of Discharge - The Coefficient of Discharge is ratio of actual discharge to theoretical discharge.
Acceleration due to Gravity - (Measured in Meter per Square Second) - The Acceleration due to Gravity is acceleration gained by an object because of gravitational force.

STEP 1: Convert Input(s) to Base Unit

Discharge through Triangular Weir: 10 Cubic Meter per Second --> 10 Cubic Meter per Second No Conversion Required
Coefficient of Discharge: 0.66 --> No Conversion Required
Acceleration due to Gravity: 9.8 Meter per Square Second --> 9.8 Meter per Square Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

S_w = Q_tri/((8/15)*C_d*sqrt(2*g))^(2/5) --> 10/((8/15)*0.66*sqrt(2*9.8))^(2/5)

Evaluating ... ...

S_w = 8.37397616347153

STEP 3: Convert Result to Output's Unit

8.37397616347153 Meter --> No Conversion Required

FINAL ANSWER

8.37397616347153 ≈ 8.373976 Meter <-- Height of Water above Crest of Weir

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Flow Over Notches and Weirs » Flow Over a Trapizoidal and Triangular Weir or Notch » Flow over a Triangular Weir or Notch » Head when Discharge for Triangular Weir Angle is 90

Credits

Created by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has created this Calculator and 500+ more calculators!

Verified by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

< Flow over a Triangular Weir or Notch Calculators

Head for Discharge for Entire Triangular Weir

LaTeX Go Height of Water above Crest of Weir = (Discharge through Triangular Weir/((8/15)*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity)*tan(Theta/2)))^(2/5)

Discharge for Entire Triangular Weir

LaTeX Go Discharge through Triangular Weir = (8/15)*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity)*tan(Theta/2)*Height of Water above Crest of Weir^(5/2)

Coefficient of Discharge when Discharge for Triangular Weir when Angle is 90

LaTeX Go Coefficient of Discharge = Discharge through Triangular Weir/((8/15)*sqrt(2*Acceleration due to Gravity)*Height of Water above Crest of Weir^(5/2))

Discharge for Triangular Weir if Angle is at 90

LaTeX Go Discharge through Triangular Weir = (8/15)*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity)*Height of Water above Crest of Weir^(3/2)

Head when Discharge for Triangular Weir Angle is 90 Formula

LaTeX Go

Height of Water above Crest of Weir = Discharge through Triangular Weir/((8/15)*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity))^(2/5)
S_w = Q_tri/((8/15)*C_d*sqrt(2*g))^(2/5)

What is Coefficient of Discharge?

Discharge Coefficient is the ratio of actual discharge through a nozzle or orifice to the theoretical discharge.

What is triangular weir?

Triangular weirs are sharp crested thin plates with V-shaped opening (or notch). These plates are installed at the exit of a channel, tank, or basin in order to measure the real-time flow of water. A typical application for these plates consists in measuring the flow of water on the downstream side of a dam.

How to Calculate Head when Discharge for Triangular Weir Angle is 90?

Head when Discharge for Triangular Weir Angle is 90 calculator uses Height of Water above Crest of Weir = Discharge through Triangular Weir/((8/15)*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity))^(2/5) to calculate the Height of Water above Crest of Weir, The Head when discharge for triangular weir angle is 90 is a measure of the potential of fluid at the measurement point. or total energy per unit weight above a datum. Height of Water above Crest of Weir is denoted by S_w symbol.

How to calculate Head when Discharge for Triangular Weir Angle is 90 using this online calculator? To use this online calculator for Head when Discharge for Triangular Weir Angle is 90, enter Discharge through Triangular Weir (Q_tri), Coefficient of Discharge (C_d) & Acceleration due to Gravity (g) and hit the calculate button. Here is how the Head when Discharge for Triangular Weir Angle is 90 calculation can be explained with given input values -> 8.373976 = 10/((8/15)*0.66*sqrt(2*9.8))^(2/5).

FAQ

What is Head when Discharge for Triangular Weir Angle is 90?

The Head when discharge for triangular weir angle is 90 is a measure of the potential of fluid at the measurement point. or total energy per unit weight above a datum and is represented as S_w = Q_tri/((8/15)*C_d*sqrt(2*g))^(2/5) or Height of Water above Crest of Weir = Discharge through Triangular Weir/((8/15)*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity))^(2/5). Discharge through Triangular Weir is discharge calculated considering the channel as triangular, The Coefficient of Discharge is ratio of actual discharge to theoretical discharge & The Acceleration due to Gravity is acceleration gained by an object because of gravitational force.

How to calculate Head when Discharge for Triangular Weir Angle is 90?

The Head when discharge for triangular weir angle is 90 is a measure of the potential of fluid at the measurement point. or total energy per unit weight above a datum is calculated using Height of Water above Crest of Weir = Discharge through Triangular Weir/((8/15)*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity))^(2/5). To calculate Head when Discharge for Triangular Weir Angle is 90, you need Discharge through Triangular Weir (Q_tri), Coefficient of Discharge (C_d) & Acceleration due to Gravity (g). With our tool, you need to enter the respective value for Discharge through Triangular Weir, Coefficient of Discharge & Acceleration due to Gravity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Height of Water above Crest of Weir?

In this formula, Height of Water above Crest of Weir uses Discharge through Triangular Weir, Coefficient of Discharge & Acceleration due to Gravity. We can use 2 other way(s) to calculate the same, which is/are as follows -

Height of Water above Crest of Weir = (Discharge through Triangular Weir/((8/15)*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity)*tan(Theta/2)))^(2/5)
Height of Water above Crest of Weir = (Discharge through Triangular Weir/1.418)^(2/5)

Home

FREE PDFs

🔍 Search