Head given Neutral Stress per unit Area for Dams on Soft Foundations Calculator

✖Minimum Stress is defined as the minimum stress that is induced or applied to the object.ⓘ Minimum Stress [σ_min]			+10% -10%
✖Depth of Dam is the distance from the top or surface to the bottom of something.ⓘ Depth of Dam [D]			+10% -10%
✖Specific Weight of Water in KN per cubic meter is the weight per unit volume of water.ⓘ Specific Weight of Water in KN per cubic meter [W]			+10% -10%
✖Length of Travel path refers to the total distance traveled along a specific route or trajectory.ⓘ Length of Travel path [L_Travelpath]			+10% -10%

✖Height of Dam is the distance between the lowest and highest points of a person/ shape/ object standing upright.ⓘ Head given Neutral Stress per unit Area for Dams on Soft Foundations [h]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Buttress Dams Formulas PDF PDF Image

Head given Neutral Stress per unit Area for Dams on Soft Foundations Solution

STEP 0: Pre-Calculation Summary

Formula Used

Height of Dam = (Minimum Stress/(Depth of Dam*Specific Weight of Water in KN per cubic meter)-1)*Length of Travel path
h = (σ_min/(D*W)-1)*L_Travelpath
This formula uses 5 Variables

Variables Used

Height of Dam - (Measured in Meter) - Height of Dam is the distance between the lowest and highest points of a person/ shape/ object standing upright.
Minimum Stress - (Measured in Pascal) - Minimum Stress is defined as the minimum stress that is induced or applied to the object.
Depth of Dam - (Measured in Meter) - Depth of Dam is the distance from the top or surface to the bottom of something.
Specific Weight of Water in KN per cubic meter - (Measured in Kilonewton per Cubic Meter) - Specific Weight of Water in KN per cubic meter is the weight per unit volume of water.
Length of Travel path - (Measured in Meter) - Length of Travel path refers to the total distance traveled along a specific route or trajectory.

STEP 1: Convert Input(s) to Base Unit

Minimum Stress: 106.3 Newton per Square Meter --> 106.3 Pascal (Check conversion here)
Depth of Dam: 3 Meter --> 3 Meter No Conversion Required
Specific Weight of Water in KN per cubic meter: 9.81 Kilonewton per Cubic Meter --> 9.81 Kilonewton per Cubic Meter No Conversion Required
Length of Travel path: 6 Meter --> 6 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h = (σ_min/(D*W)-1)*L_Travelpath --> (106.3/(3*9.81)-1)*6

Evaluating ... ...

h = 15.6717635066259

STEP 3: Convert Result to Output's Unit

15.6717635066259 Meter --> No Conversion Required

FINAL ANSWER

15.6717635066259 ≈ 15.67176 Meter <-- Height of Dam

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Dams » Buttress Dams » Dams on Soft or Porous Foundations » Hydraulic Head » Head given Neutral Stress per unit Area for Dams on Soft Foundations

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Hydraulic Head Calculators

Depth below Surface for Total Pressure per unit Area for Dams on Soft Foundations

LaTeX Go Depth of Dam = Total Pressure/(Specific Weight of Water in KN per cubic meter*((Degree of Saturation+Void Ratio)/(1+Void Ratio)))

Depth below Surface given Neutral Stress per unit Area for Dams on Soft Foundations

LaTeX Go Depth of Dam = Minimum Stress/(Specific Weight of Water in KN per cubic meter*(1+Height of Dam/Length of Travel path))

Head given Neutral Stress per unit Area for Dams on Soft Foundations

LaTeX Go Height of Dam = (Minimum Stress/(Depth of Dam*Specific Weight of Water in KN per cubic meter)-1)*Length of Travel path

Head given Hydraulic Gradient per unit Head for Dams on Soft Foundations

LaTeX Go Head of Water = (Discharge from Dam)/(Coefficient of Permeability of Soil*Equipotential Lines)

Head given Neutral Stress per unit Area for Dams on Soft Foundations Formula

LaTeX Go

Height of Dam = (Minimum Stress/(Depth of Dam*Specific Weight of Water in KN per cubic meter)-1)*Length of Travel path
h = (σ_min/(D*W)-1)*L_Travelpath

What is a Buttress Dam?

A buttress dam or hollow dam is a dam with a solid, water-tight upstream side that is supported at intervals on the downstream side by a series of buttresses or supports

How to Calculate Head given Neutral Stress per unit Area for Dams on Soft Foundations?

Head given Neutral Stress per unit Area for Dams on Soft Foundations calculator uses Height of Dam = (Minimum Stress/(Depth of Dam*Specific Weight of Water in KN per cubic meter)-1)*Length of Travel path to calculate the Height of Dam, Head given Neutral Stress per unit Area for Dams on Soft Foundations formula is defined as amount of water above dam. Height of Dam is denoted by h symbol.

How to calculate Head given Neutral Stress per unit Area for Dams on Soft Foundations using this online calculator? To use this online calculator for Head given Neutral Stress per unit Area for Dams on Soft Foundations, enter Minimum Stress (σ_min), Depth of Dam (D), Specific Weight of Water in KN per cubic meter (W) & Length of Travel path (L_Travelpath) and hit the calculate button. Here is how the Head given Neutral Stress per unit Area for Dams on Soft Foundations calculation can be explained with given input values -> 15.67176 = (106.3/(3*9810)-1)*6.

FAQ

What is Head given Neutral Stress per unit Area for Dams on Soft Foundations?

Head given Neutral Stress per unit Area for Dams on Soft Foundations formula is defined as amount of water above dam and is represented as h = (σ_min/(D*W)-1)*L_Travelpath or Height of Dam = (Minimum Stress/(Depth of Dam*Specific Weight of Water in KN per cubic meter)-1)*Length of Travel path. Minimum Stress is defined as the minimum stress that is induced or applied to the object, Depth of Dam is the distance from the top or surface to the bottom of something, Specific Weight of Water in KN per cubic meter is the weight per unit volume of water & Length of Travel path refers to the total distance traveled along a specific route or trajectory.

How to calculate Head given Neutral Stress per unit Area for Dams on Soft Foundations?

Head given Neutral Stress per unit Area for Dams on Soft Foundations formula is defined as amount of water above dam is calculated using Height of Dam = (Minimum Stress/(Depth of Dam*Specific Weight of Water in KN per cubic meter)-1)*Length of Travel path. To calculate Head given Neutral Stress per unit Area for Dams on Soft Foundations, you need Minimum Stress (σ_min), Depth of Dam (D), Specific Weight of Water in KN per cubic meter (W) & Length of Travel path (L_Travelpath). With our tool, you need to enter the respective value for Minimum Stress, Depth of Dam, Specific Weight of Water in KN per cubic meter & Length of Travel path and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search