Head given Coefficient using Bazin Formula and Velocity Calculator

✖Bazins Coefficient is the constant value obtained by Head.ⓘ Bazins Coefficient [m]

+10%

-10%

✖Still Water Head is the head of water which is still over weir.ⓘ Head given Coefficient using Bazin Formula and Velocity [H_Stillwater]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Flow Over Rectangular Sharp Crested Weir or Notch Formulas PDF PDF Image

Head given Coefficient using Bazin Formula and Velocity Solution

STEP 0: Pre-Calculation Summary

Formula Used

Still Water Head = 0.003/(Bazins Coefficient-0.405)
H_Stillwater = 0.003/(m-0.405)
This formula uses 2 Variables

Variables Used

Still Water Head - (Measured in Meter) - Still Water Head is the head of water which is still over weir.
Bazins Coefficient - Bazins Coefficient is the constant value obtained by Head.

STEP 1: Convert Input(s) to Base Unit

Bazins Coefficient: 0.407 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

H_Stillwater = 0.003/(m-0.405) --> 0.003/(0.407-0.405)

Evaluating ... ...

H_Stillwater = 1.50000000000004

STEP 3: Convert Result to Output's Unit

1.50000000000004 Meter --> No Conversion Required

FINAL ANSWER

1.50000000000004 ≈ 1.5 Meter <-- Still Water Head

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Flow Over Notches and Weirs » Flow Over Rectangular Sharp Crested Weir or Notch » Hydraulic Head » Head given Coefficient using Bazin Formula and Velocity

Credits

Created by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has created this Calculator and 500+ more calculators!

Verified by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

< Hydraulic Head Calculators

Head over Crest given Discharge Passing over Weir with Velocity

LaTeX Go Height of Water above Crest of Weir = (((Francis Discharge with Suppressed End*3)/(2*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity)*Length of Weir Crest))+Velocity Head^(3/2))^(2/3)-Velocity Head

Head over Crest for given Discharge without Velocity

LaTeX Go Height of Water above Crest of Weir = ((Francis Discharge with Suppressed End*3)/(2*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity)*Length of Weir Crest))^(2/3)

Head given Discharge through Notch which is to be Calibrated

LaTeX Go Height of Water above Crest of Weir = (Francis Discharge with Suppressed End/Constant of Flow)^(1/Number of End Contraction)

Head when End Contractions is suppressed

LaTeX Go Still Water Head = (Francis Discharge with Suppressed End/(1.84*Length of Weir Crest))^(2/3)

Head given Coefficient using Bazin Formula and Velocity Formula

LaTeX Go

Still Water Head = 0.003/(Bazins Coefficient-0.405)
H_Stillwater = 0.003/(m-0.405)

What is meant by Coefficient?

Coefficient may be defined as any of the factors of a product considered in relation to a specific factor. like pressure head, acceleration due to gravity etc.

What is weir?

A weir or low head dam is a barrier across the width of a river that alters the flow characteristics of water and usually results in a change in the height of the river level. They are also used to control the flow of water for outlets of lakes, ponds, and reservoirs.

How to Calculate Head given Coefficient using Bazin Formula and Velocity?

Head given Coefficient using Bazin Formula and Velocity calculator uses Still Water Head = 0.003/(Bazins Coefficient-0.405) to calculate the Still Water Head, The Head given Coefficient using Bazin Formula and Velocity is a measure of the potential of fluid at the measurement point. or total energy per unit weight above a datum. Still Water Head is denoted by H_Stillwater symbol.

How to calculate Head given Coefficient using Bazin Formula and Velocity using this online calculator? To use this online calculator for Head given Coefficient using Bazin Formula and Velocity, enter Bazins Coefficient (m) and hit the calculate button. Here is how the Head given Coefficient using Bazin Formula and Velocity calculation can be explained with given input values -> 1.5 = 0.003/(0.407-0.405).

FAQ

What is Head given Coefficient using Bazin Formula and Velocity?

The Head given Coefficient using Bazin Formula and Velocity is a measure of the potential of fluid at the measurement point. or total energy per unit weight above a datum and is represented as H_Stillwater = 0.003/(m-0.405) or Still Water Head = 0.003/(Bazins Coefficient-0.405). Bazins Coefficient is the constant value obtained by Head.

How to calculate Head given Coefficient using Bazin Formula and Velocity?

The Head given Coefficient using Bazin Formula and Velocity is a measure of the potential of fluid at the measurement point. or total energy per unit weight above a datum is calculated using Still Water Head = 0.003/(Bazins Coefficient-0.405). To calculate Head given Coefficient using Bazin Formula and Velocity, you need Bazins Coefficient (m). With our tool, you need to enter the respective value for Bazins Coefficient and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Still Water Head?

In this formula, Still Water Head uses Bazins Coefficient. We can use 2 other way(s) to calculate the same, which is/are as follows -

Still Water Head = (Francis Discharge with Suppressed End/(1.84*Length of Weir Crest))^(2/3)
Still Water Head = (Bazins Discharge with Velocity/(Bazins Coefficient*sqrt(2*Acceleration due to Gravity)*Length of Weir Crest))^(2/3)

Home

FREE PDFs

🔍 Search