Haul Distance in Meter given Variable Time Calculator

✖Variable Time in Scraper Production is a schedule of stimulus presentation in which stimuli are presented, independently of any behavior.ⓘ Variable Time in Scraper Production [T_v]			+10% -10%
✖Speed in Kmph in Scraper Production is defined as distance in km covered per unit hour.ⓘ Speed in Kmph in Scraper Production [S_kmph]			+10% -10%
✖Return Distance in Meter is the journey back from a destination in meter.ⓘ Return Distance in Meter [R_meter]			+10% -10%

✖Haul Distance is the specified distance the excavated material is hauled without additional compensation.ⓘ Haul Distance in Meter given Variable Time [h_m]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Scraper Production Formulas PDF PDF Image

Haul Distance in Meter given Variable Time Solution

STEP 0: Pre-Calculation Summary

Formula Used

Haul Distance = (Variable Time in Scraper Production*16.7*Speed in Kmph in Scraper Production)-Return Distance in Meter
h_m = (T_v*16.7*S_kmph)-R_meter
This formula uses 4 Variables

Variables Used

Haul Distance - (Measured in Meter) - Haul Distance is the specified distance the excavated material is hauled without additional compensation.
Variable Time in Scraper Production - (Measured in Second) - Variable Time in Scraper Production is a schedule of stimulus presentation in which stimuli are presented, independently of any behavior.
Speed in Kmph in Scraper Production - (Measured in Meter per Second) - Speed in Kmph in Scraper Production is defined as distance in km covered per unit hour.
Return Distance in Meter - (Measured in Meter) - Return Distance in Meter is the journey back from a destination in meter.

STEP 1: Convert Input(s) to Base Unit

Variable Time in Scraper Production: 0.2 Minute --> 12 Second (Check conversion here)
Speed in Kmph in Scraper Production: 0.149 Kilometer per Hour --> 0.0413888888888889 Meter per Second (Check conversion here)
Return Distance in Meter: 1.49 Meter --> 1.49 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h_m = (T_v*16.7*S_kmph)-R_meter --> (12*16.7*0.0413888888888889)-1.49

Evaluating ... ...

h_m = 6.80433333333333

STEP 3: Convert Result to Output's Unit

6.80433333333333 Meter --> No Conversion Required

FINAL ANSWER

6.80433333333333 ≈ 6.804333 Meter <-- Haul Distance

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Scraper Production » Haul Distance in Meter given Variable Time

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Scraper Production Calculators

Trips per Hour given Production of Scrap by Machines

LaTeX Go Trips per Hour = (Production Required in Scraper Production/Load in Scraper Production)

Load Given Production of Scrap by Machines

LaTeX Go Load in Scraper Production = (Production Required in Scraper Production/Trips per Hour)

Production of Scrap by Machines

LaTeX Go Production Required in Scraper Production = (Load in Scraper Production*Trips per Hour)

Trips per Hour for Excavating Scrap

LaTeX Go Trips per Hour = (Working Time in Scraper Production/Cycle Time)

Haul Distance in Meter given Variable Time Formula

LaTeX Go

Haul Distance = (Variable Time in Scraper Production*16.7*Speed in Kmph in Scraper Production)-Return Distance in Meter
h_m = (T_v*16.7*S_kmph)-R_meter

What is Haul Distance?

The distance measured along the center line or most direct practical route between the center of the mass of excavation and the center of mass of the fill as finally placed. It is the distance material is moved.

How to Calculate Haul Distance in Meter given Variable Time?

Haul Distance in Meter given Variable Time calculator uses Haul Distance = (Variable Time in Scraper Production*16.7*Speed in Kmph in Scraper Production)-Return Distance in Meter to calculate the Haul Distance, The Haul Distance in Meter given Variable Time is defined as the haul distance when other parameters are known. Haul Distance is denoted by h_m symbol.

How to calculate Haul Distance in Meter given Variable Time using this online calculator? To use this online calculator for Haul Distance in Meter given Variable Time, enter Variable Time in Scraper Production (T_v), Speed in Kmph in Scraper Production (S_kmph) & Return Distance in Meter (R_meter) and hit the calculate button. Here is how the Haul Distance in Meter given Variable Time calculation can be explained with given input values -> 4.522 = (12*16.7*0.0413888888888889)-1.49.

FAQ

What is Haul Distance in Meter given Variable Time?

The Haul Distance in Meter given Variable Time is defined as the haul distance when other parameters are known and is represented as h_m = (T_v*16.7*S_kmph)-R_meter or Haul Distance = (Variable Time in Scraper Production*16.7*Speed in Kmph in Scraper Production)-Return Distance in Meter. Variable Time in Scraper Production is a schedule of stimulus presentation in which stimuli are presented, independently of any behavior, Speed in Kmph in Scraper Production is defined as distance in km covered per unit hour & Return Distance in Meter is the journey back from a destination in meter.

How to calculate Haul Distance in Meter given Variable Time?

The Haul Distance in Meter given Variable Time is defined as the haul distance when other parameters are known is calculated using Haul Distance = (Variable Time in Scraper Production*16.7*Speed in Kmph in Scraper Production)-Return Distance in Meter. To calculate Haul Distance in Meter given Variable Time, you need Variable Time in Scraper Production (T_v), Speed in Kmph in Scraper Production (S_kmph) & Return Distance in Meter (R_meter). With our tool, you need to enter the respective value for Variable Time in Scraper Production, Speed in Kmph in Scraper Production & Return Distance in Meter and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search