Greatest Safe Load for Deck Beam when Load in Middle Calculator

✖Cross Sectional Area of Beam the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.ⓘ Cross Sectional Area of Beam [A_cs]			+10% -10%
✖Depth of Beam is the overall depth of the cross-section of the beam perpendicular to the axis of the beam.ⓘ Depth of Beam [d_b]			+10% -10%
✖Length of Beam is the center to center distance between the supports or the effective length of the beam.ⓘ Length of Beam [L]			+10% -10%

✖The Greatest Safe Point Load refers to the maximum weight or force that can be applied to a structure without causing failure or damage, ensuring structural integrity and safety.ⓘ Greatest Safe Load for Deck Beam when Load in Middle [Wp]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Moving Loads and Influence Lines for Beams Formulas PDF PDF Image

Greatest Safe Load for Deck Beam when Load in Middle Solution

STEP 0: Pre-Calculation Summary

Formula Used

Greatest Safe Point Load = (1380*Cross Sectional Area of Beam*Depth of Beam)/Length of Beam
Wp = (1380*A_cs*d_b)/L
This formula uses 4 Variables

Variables Used

Greatest Safe Point Load - (Measured in Newton) - The Greatest Safe Point Load refers to the maximum weight or force that can be applied to a structure without causing failure or damage, ensuring structural integrity and safety.
Cross Sectional Area of Beam - (Measured in Square Meter) - Cross Sectional Area of Beam the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.
Depth of Beam - (Measured in Meter) - Depth of Beam is the overall depth of the cross-section of the beam perpendicular to the axis of the beam.
Length of Beam - (Measured in Meter) - Length of Beam is the center to center distance between the supports or the effective length of the beam.

STEP 1: Convert Input(s) to Base Unit

Cross Sectional Area of Beam: 13 Square Meter --> 13 Square Meter No Conversion Required
Depth of Beam: 10.01 Inch --> 0.254254000001017 Meter (Check conversion here)
Length of Beam: 10.02 Foot --> 3.05409600001222 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Wp = (1380*A_cs*d_b)/L --> (1380*13*0.254254000001017)/3.05409600001222

Evaluating ... ...

Wp = 1493.50798403193

STEP 3: Convert Result to Output's Unit

1493.50798403193 Newton -->1.49350798403193 Kilonewton (Check conversion here)

FINAL ANSWER

1.49350798403193 ≈ 1.493508 Kilonewton <-- Greatest Safe Point Load

(Calculation completed in 00.010 seconds)

You are here -

Home » Engineering » Civil » Structural Engineering » Structural Analysis » Moving Loads and Influence Lines for Beams » Safe Loads » Greatest Safe Load for Deck Beam when Load in Middle

Credits

Created by Alithea Fernandes

Don Bosco College of Engineering (DBCE), Goa

Alithea Fernandes has created this Calculator and 100+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< Safe Loads Calculators

Greatest Safe Load for Hollow Rectangle when Load is Distributed

LaTeX Go Greatest Safe Distributed Load = 1780*(Cross Sectional Area of Beam*Depth of Beam-Interior Cross-Sectional Area of Beam*Interior Depth of Beam)/Distance between Supports

Greatest Safe Load for Hollow Rectangle when Load in Middle

LaTeX Go Greatest Safe Point Load = (890*(Cross Sectional Area of Beam*Depth of Beam-Interior Cross-Sectional Area of Beam*Interior Depth of Beam))/Length of Beam

Greatest Safe Load for Solid Rectangle when Load is Distributed

LaTeX Go Greatest Safe Distributed Load = 1780*Cross Sectional Area of Beam*Depth of Beam/Length of Beam

Greatest Safe Load for Solid Rectangle given Load in Middle

LaTeX Go Greatest Safe Point Load = 890*Cross Sectional Area of Beam*Depth of Beam/Length of Beam

Greatest Safe Load for Deck Beam when Load in Middle Formula

LaTeX Go

Greatest Safe Point Load = (1380*Cross Sectional Area of Beam*Depth of Beam)/Length of Beam
Wp = (1380*A_cs*d_b)/L

What is Safe Working Load?

Safe Working Load sometimes stated as the Normal Working Load is the maximum safe force that a piece of lifting equipment, lifting device or accessory can exert to lift, suspend, or lower, a given mass without fear of breaking.

How to Calculate Greatest Safe Load for Deck Beam when Load in Middle?

Greatest Safe Load for Deck Beam when Load in Middle calculator uses Greatest Safe Point Load = (1380*Cross Sectional Area of Beam*Depth of Beam)/Length of Beam to calculate the Greatest Safe Point Load, The Greatest Safe Load for Deck Beam when Load in Middle formula is defined as the load that a piece of lifting equipment, lifting device or accessory can safely use to lift, suspend, or lower a mass without fear of breaking. Greatest Safe Point Load is denoted by Wp symbol.

How to calculate Greatest Safe Load for Deck Beam when Load in Middle using this online calculator? To use this online calculator for Greatest Safe Load for Deck Beam when Load in Middle, enter Cross Sectional Area of Beam (A_cs), Depth of Beam (d_b) & Length of Beam (L) and hit the calculate button. Here is how the Greatest Safe Load for Deck Beam when Load in Middle calculation can be explained with given input values -> 0.001494 = (1380*13*0.254254000001017)/3.05409600001222.

FAQ

What is Greatest Safe Load for Deck Beam when Load in Middle?

The Greatest Safe Load for Deck Beam when Load in Middle formula is defined as the load that a piece of lifting equipment, lifting device or accessory can safely use to lift, suspend, or lower a mass without fear of breaking and is represented as Wp = (1380*A_cs*d_b)/L or Greatest Safe Point Load = (1380*Cross Sectional Area of Beam*Depth of Beam)/Length of Beam. Cross Sectional Area of Beam the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point, Depth of Beam is the overall depth of the cross-section of the beam perpendicular to the axis of the beam & Length of Beam is the center to center distance between the supports or the effective length of the beam.

How to calculate Greatest Safe Load for Deck Beam when Load in Middle?

The Greatest Safe Load for Deck Beam when Load in Middle formula is defined as the load that a piece of lifting equipment, lifting device or accessory can safely use to lift, suspend, or lower a mass without fear of breaking is calculated using Greatest Safe Point Load = (1380*Cross Sectional Area of Beam*Depth of Beam)/Length of Beam. To calculate Greatest Safe Load for Deck Beam when Load in Middle, you need Cross Sectional Area of Beam (A_cs), Depth of Beam (d_b) & Length of Beam (L). With our tool, you need to enter the respective value for Cross Sectional Area of Beam, Depth of Beam & Length of Beam and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Greatest Safe Point Load?

In this formula, Greatest Safe Point Load uses Cross Sectional Area of Beam, Depth of Beam & Length of Beam. We can use 3 other way(s) to calculate the same, which is/are as follows -

Greatest Safe Point Load = 890*Cross Sectional Area of Beam*Depth of Beam/Length of Beam
Greatest Safe Point Load = (890*(Cross Sectional Area of Beam*Depth of Beam-Interior Cross-Sectional Area of Beam*Interior Depth of Beam))/Length of Beam
Greatest Safe Point Load = (667*Cross Sectional Area of Beam*Depth of Beam)/Length of Beam

Home

FREE PDFs

🔍 Search