Fugacity using Residual Gibbs Free Energy and Pressure Calculator

✖Pressure is the force applied perpendicular to the surface of an object per unit area over which that force is distributed.ⓘ Pressure [P]			+10% -10%
✖Residual Gibbs Free Energy is the Gibbs energy of a mixture which is left as residual from what it would be if it were ideal.ⓘ Residual Gibbs Free Energy [G^R]			+10% -10%
✖Temperature is the degree or intensity of heat present in a substance or object.ⓘ Temperature [T]			+10% -10%

✖Fugacity is a thermodynamic property of a real gas which if substituted for the pressure or partial pressure in the equations for an ideal gas gives equations applicable to the real gas.ⓘ Fugacity using Residual Gibbs Free Energy and Pressure [f]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Chemical Engineering Formula PDF PDF Image

Fugacity using Residual Gibbs Free Energy and Pressure Solution

STEP 0: Pre-Calculation Summary

Formula Used

Fugacity = Pressure*exp(Residual Gibbs Free Energy/([R]*Temperature))
f = P*exp(G^R/([R]*T))
This formula uses 1 Constants, 1 Functions, 4 Variables

Constants Used

[R] - Universal gas constant Value Taken As 8.31446261815324

Functions Used

exp - n an exponential function, the value of the function changes by a constant factor for every unit change in the independent variable., exp(Number)

Variables Used

Fugacity - (Measured in Pascal) - Fugacity is a thermodynamic property of a real gas which if substituted for the pressure or partial pressure in the equations for an ideal gas gives equations applicable to the real gas.
Pressure - (Measured in Pascal) - Pressure is the force applied perpendicular to the surface of an object per unit area over which that force is distributed.
Residual Gibbs Free Energy - (Measured in Joule) - Residual Gibbs Free Energy is the Gibbs energy of a mixture which is left as residual from what it would be if it were ideal.
Temperature - (Measured in Kelvin) - Temperature is the degree or intensity of heat present in a substance or object.

STEP 1: Convert Input(s) to Base Unit

Pressure: 38.4 Pascal --> 38.4 Pascal No Conversion Required
Residual Gibbs Free Energy: 105 Joule --> 105 Joule No Conversion Required
Temperature: 450 Kelvin --> 450 Kelvin No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

f = P*exp(G^R/([R]*T)) --> 38.4*exp(105/([R]*450))

Evaluating ... ...

f = 39.4929039567313

STEP 3: Convert Result to Output's Unit

39.4929039567313 Pascal --> No Conversion Required

FINAL ANSWER

39.4929039567313 ≈ 39.4929 Pascal <-- Fugacity

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Chemical Engineering » Thermodynamics » Solution Thermodynamics » Fugacity and Fugacity Coefficient » Fugacity and Fugacity Coefficient using Residual Gibbs Energy » Fugacity and Fugacity Coefficient » Fugacity using Residual Gibbs Free Energy and Pressure

Credits

Created by Shivam Sinha

National Institute Of Technology (NIT), Surathkal

Shivam Sinha has created this Calculator and 300+ more calculators!

Verified by Akshada Kulkarni

National Institute of Information Technology (NIIT), Neemrana

Akshada Kulkarni has verified this Calculator and 900+ more calculators!

< Fugacity and Fugacity Coefficient Calculators

Gibbs Free Energy using Ideal Gibbs Free Energy and Fugacity Coefficient

LaTeX Go Gibbs Free Energy = Ideal Gas Gibbs Free Energy+[R]*Temperature*ln(Fugacity Coefficient)

Temperature using Residual Gibbs Free Energy and Fugacity Coefficient

LaTeX Go Temperature = modulus(Residual Gibbs Free Energy/([R]*ln(Fugacity Coefficient)))

Fugacity Coefficient using Residual Gibbs Free Energy

LaTeX Go Fugacity Coefficient = exp(Residual Gibbs Free Energy/([R]*Temperature))

Residual Gibbs Free Energy using Fugacity Coefficient

LaTeX Go Residual Gibbs Free Energy = [R]*Temperature*ln(Fugacity Coefficient)

Fugacity using Residual Gibbs Free Energy and Pressure Formula

LaTeX Go

Fugacity = Pressure*exp(Residual Gibbs Free Energy/([R]*Temperature))
f = P*exp(G^R/([R]*T))

What is Gibbs Free Energy?

The Gibbs free energy (or Gibbs energy) is a thermodynamic potential that can be used to calculate the maximum reversible work that may be performed by a thermodynamic system at a constant temperature and pressure. The Gibbs free energy measured in joules in SI) is the maximum amount of non-expansion work that can be extracted from a thermodynamically closed system (can exchange heat and work with its surroundings, but not matter). This maximum can be attained only in a completely reversible process. When a system transforms reversibly from an initial state to a final state, the decrease in Gibbs free energy equals the work done by the system to its surroundings, minus the work of the pressure forces.

What is Duhem’s Theorem?

For any closed system formed from known amounts of prescribed chemical species, the equilibrium state is completely determined when any two independent variables are fixed. The two independent variables subject to specification may in general be either intensive or extensive. However, the number of independent intensive variables is given by the phase rule. Thus when F = 1, at least one of the two variables must be extensive, and when F = 0, both must be extensive.

How to Calculate Fugacity using Residual Gibbs Free Energy and Pressure?

Fugacity using Residual Gibbs Free Energy and Pressure calculator uses Fugacity = Pressure*exp(Residual Gibbs Free Energy/([R]*Temperature)) to calculate the Fugacity, The Fugacity using Residual Gibbs Free Energy and Pressure formula is defined as the product of the pressure and the exponential of the ratio of the residual Gibbs free energy to the product of universal gas constant and temperature. Fugacity is denoted by f symbol.

How to calculate Fugacity using Residual Gibbs Free Energy and Pressure using this online calculator? To use this online calculator for Fugacity using Residual Gibbs Free Energy and Pressure, enter Pressure (P), Residual Gibbs Free Energy (G^R) & Temperature (T) and hit the calculate button. Here is how the Fugacity using Residual Gibbs Free Energy and Pressure calculation can be explained with given input values -> 39.4929 = 38.4*exp(105/([R]*450)).

FAQ

What is Fugacity using Residual Gibbs Free Energy and Pressure?

The Fugacity using Residual Gibbs Free Energy and Pressure formula is defined as the product of the pressure and the exponential of the ratio of the residual Gibbs free energy to the product of universal gas constant and temperature and is represented as f = P*exp(G^R/([R]*T)) or Fugacity = Pressure*exp(Residual Gibbs Free Energy/([R]*Temperature)). Pressure is the force applied perpendicular to the surface of an object per unit area over which that force is distributed, Residual Gibbs Free Energy is the Gibbs energy of a mixture which is left as residual from what it would be if it were ideal & Temperature is the degree or intensity of heat present in a substance or object.

How to calculate Fugacity using Residual Gibbs Free Energy and Pressure?

The Fugacity using Residual Gibbs Free Energy and Pressure formula is defined as the product of the pressure and the exponential of the ratio of the residual Gibbs free energy to the product of universal gas constant and temperature is calculated using Fugacity = Pressure*exp(Residual Gibbs Free Energy/([R]*Temperature)). To calculate Fugacity using Residual Gibbs Free Energy and Pressure, you need Pressure (P), Residual Gibbs Free Energy (G^R) & Temperature (T). With our tool, you need to enter the respective value for Pressure, Residual Gibbs Free Energy & Temperature and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Fugacity?

In this formula, Fugacity uses Pressure, Residual Gibbs Free Energy & Temperature. We can use 1 other way(s) to calculate the same, which is/are as follows -

Fugacity = Pressure*exp((Gibbs Free Energy-Ideal Gas Gibbs Free Energy)/([R]*Temperature))

Home

FREE PDFs

🔍 Search