Fugacity of Liq. Phase Species using Poynting Factor Calculator

✖Saturated Fugacity Coefficient of Species is the ratio of the saturated fugacity of a species to the saturated pressure of a species.ⓘ Saturated Fugacity Coefficient of Species [ϕ^sat]			+10% -10%
✖Saturated pressure is the pressure at which a given liquid and its vapour or a given solid and its vapour can co-exist in equilibrium, at a given temperature.ⓘ Saturated Pressure [P^sat]			+10% -10%
✖Poynting Factor can be stated as the change in fugacity as the pressure goes from the saturated pressure to pressure at a constant temperature.ⓘ Poynting Factor [P.F.]			+10% -10%

✖Fugacity of Liquid Phase Species is denoted by f^l symbol.ⓘ Fugacity of Liq. Phase Species using Poynting Factor [f^l]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Chemical Engineering Formula PDF PDF Image

Fugacity of Liq. Phase Species using Poynting Factor Solution

STEP 0: Pre-Calculation Summary

Formula Used

Fugacity of Liquid Phase Species = Saturated Fugacity Coefficient of Species*Saturated Pressure*Poynting Factor
f^l = ϕ^sat*P^sat*P.F.
This formula uses 4 Variables

Variables Used

Fugacity of Liquid Phase Species - (Measured in Pascal) - Fugacity of Liquid Phase Species is denoted by f^l symbol.
Saturated Fugacity Coefficient of Species - Saturated Fugacity Coefficient of Species is the ratio of the saturated fugacity of a species to the saturated pressure of a species.
Saturated Pressure - (Measured in Pascal) - Saturated pressure is the pressure at which a given liquid and its vapour or a given solid and its vapour can co-exist in equilibrium, at a given temperature.
Poynting Factor - Poynting Factor can be stated as the change in fugacity as the pressure goes from the saturated pressure to pressure at a constant temperature.

STEP 1: Convert Input(s) to Base Unit

Saturated Fugacity Coefficient of Species: 0.13 --> No Conversion Required
Saturated Pressure: 20 Pascal --> 20 Pascal No Conversion Required
Poynting Factor: 100 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

f^l = ϕ^sat*P^sat*P.F. --> 0.13*20*100

Evaluating ... ...

f^l = 260

STEP 3: Convert Result to Output's Unit

260 Pascal --> No Conversion Required

FINAL ANSWER

260 Pascal <-- Fugacity of Liquid Phase Species

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Chemical Engineering » Thermodynamics » Solution Thermodynamics » Fugacity and Fugacity Coefficient » Fugacity of Liq. Phase Species using Poynting Factor

Credits

Created by Shivam Sinha

National Institute Of Technology (NIT), Surathkal

Shivam Sinha has created this Calculator and 300+ more calculators!

Verified by Akshada Kulkarni

National Institute of Information Technology (NIIT), Neemrana

Akshada Kulkarni has verified this Calculator and 900+ more calculators!

< Fugacity and Fugacity Coefficient Calculators

Saturated Fugacity Coeff. using Poynting Factor Correlation and Fugacity of Liq. Phase Species

LaTeX Go Saturated Fugacity Coefficient of Species = Fugacity of Liquid Phase Species/(Saturated Pressure*exp((-Volume of Liquid Phase*(Pressure-Saturated Pressure))/([R]*Temperature)))

Fugacity of Liq. Phase Species using Poynting Factor Correlation

LaTeX Go Fugacity of Liquid Phase Species = Saturated Fugacity Coefficient of Species*Saturated Pressure*exp((Volume of Liquid Phase*(Pressure-Saturated Pressure))/([R]*Temperature))

Poynting Factor

LaTeX Go Poynting Factor = exp((-Volume of Liquid Phase*(Pressure-Saturated Pressure))/([R]*Temperature))

Fugacity of Liq. Phase Species using Poynting Factor

LaTeX Go Fugacity of Liquid Phase Species = Saturated Fugacity Coefficient of Species*Saturated Pressure*Poynting Factor

Fugacity of Liq. Phase Species using Poynting Factor Formula

LaTeX Go

Fugacity of Liquid Phase Species = Saturated Fugacity Coefficient of Species*Saturated Pressure*Poynting Factor
f^l = ϕ^sat*P^sat*P.F.

What is poynting factor?

The Poynting effect generally refers to the change in the fugacity of a liquid when a non-condensable gas is mixed with the vapor at saturated conditions. at high pressure while remaining in the gaseous form is due to the Poynting effect. The Poynting factor can be stated as the change in fugacity as the pressure goes from the saturated pressure to pressure at a constant temperature.

What is Duhem’s Theorem?

For any closed system formed from known amounts of prescribed chemical species, the equilibrium state is completely determined when any two independent variables are fixed. The two independent variables subject to specification may in general be either intensive or extensive. However, the number of independent intensive variables is given by the phase rule. Thus when F = 1, at least one of the two variables must be extensive, and when F = 0, both must be extensive.

How to Calculate Fugacity of Liq. Phase Species using Poynting Factor?

Fugacity of Liq. Phase Species using Poynting Factor calculator uses Fugacity of Liquid Phase Species = Saturated Fugacity Coefficient of Species*Saturated Pressure*Poynting Factor to calculate the Fugacity of Liquid Phase Species, The Fugacity of Liq. Phase Species using Poynting Factor formula is defined as the product of saturated fugacity coefficient of a species, saturated pressure and Poynting factor. Fugacity of Liquid Phase Species is denoted by f^l symbol.

How to calculate Fugacity of Liq. Phase Species using Poynting Factor using this online calculator? To use this online calculator for Fugacity of Liq. Phase Species using Poynting Factor, enter Saturated Fugacity Coefficient of Species (ϕ^sat), Saturated Pressure (P^sat) & Poynting Factor (P.F.) and hit the calculate button. Here is how the Fugacity of Liq. Phase Species using Poynting Factor calculation can be explained with given input values -> 260 = 0.13*20*100.

FAQ

What is Fugacity of Liq. Phase Species using Poynting Factor?

The Fugacity of Liq. Phase Species using Poynting Factor formula is defined as the product of saturated fugacity coefficient of a species, saturated pressure and Poynting factor and is represented as f^l = ϕ^sat*P^sat*P.F. or Fugacity of Liquid Phase Species = Saturated Fugacity Coefficient of Species*Saturated Pressure*Poynting Factor. Saturated Fugacity Coefficient of Species is the ratio of the saturated fugacity of a species to the saturated pressure of a species, Saturated pressure is the pressure at which a given liquid and its vapour or a given solid and its vapour can co-exist in equilibrium, at a given temperature & Poynting Factor can be stated as the change in fugacity as the pressure goes from the saturated pressure to pressure at a constant temperature.

How to calculate Fugacity of Liq. Phase Species using Poynting Factor?

The Fugacity of Liq. Phase Species using Poynting Factor formula is defined as the product of saturated fugacity coefficient of a species, saturated pressure and Poynting factor is calculated using Fugacity of Liquid Phase Species = Saturated Fugacity Coefficient of Species*Saturated Pressure*Poynting Factor. To calculate Fugacity of Liq. Phase Species using Poynting Factor, you need Saturated Fugacity Coefficient of Species (ϕ^sat), Saturated Pressure (P^sat) & Poynting Factor (P.F.). With our tool, you need to enter the respective value for Saturated Fugacity Coefficient of Species, Saturated Pressure & Poynting Factor and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Fugacity of Liquid Phase Species?

In this formula, Fugacity of Liquid Phase Species uses Saturated Fugacity Coefficient of Species, Saturated Pressure & Poynting Factor. We can use 1 other way(s) to calculate the same, which is/are as follows -

Fugacity of Liquid Phase Species = Saturated Fugacity Coefficient of Species*Saturated Pressure*exp((Volume of Liquid Phase*(Pressure-Saturated Pressure))/([R]*Temperature))

Home

FREE PDFs

🔍 Search