Fugacity Coefficient using Gibbs Free Energy and Ideal Gibbs Free Energy Calculator

✖Gibbs Free Energy is a thermodynamic potential that can be used to calculate the maximum of reversible work that may be performed by a thermodynamic system at a constant temperature and pressure.ⓘ Gibbs Free Energy [G]			+10% -10%
✖Ideal Gas Gibbs Free Energy is the Gibbs energy in an ideal condition.ⓘ Ideal Gas Gibbs Free Energy [G^ig]			+10% -10%
✖Temperature is the degree or intensity of heat present in a substance or object.ⓘ Temperature [T]			+10% -10%

✖Fugacity coefficient is the ratio of fugacity to the pressure of that component.ⓘ Fugacity Coefficient using Gibbs Free Energy and Ideal Gibbs Free Energy [ϕ]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Chemical Engineering Formula PDF PDF Image

Fugacity Coefficient using Gibbs Free Energy and Ideal Gibbs Free Energy Solution

STEP 0: Pre-Calculation Summary

Formula Used

Fugacity Coefficient = exp((Gibbs Free Energy-Ideal Gas Gibbs Free Energy)/([R]*Temperature))
ϕ = exp((G-G^ig)/([R]*T))
This formula uses 1 Constants, 1 Functions, 4 Variables

Constants Used

[R] - Universal gas constant Value Taken As 8.31446261815324

Functions Used

exp - n an exponential function, the value of the function changes by a constant factor for every unit change in the independent variable., exp(Number)

Variables Used

Fugacity Coefficient - Fugacity coefficient is the ratio of fugacity to the pressure of that component.
Gibbs Free Energy - (Measured in Joule) - Gibbs Free Energy is a thermodynamic potential that can be used to calculate the maximum of reversible work that may be performed by a thermodynamic system at a constant temperature and pressure.
Ideal Gas Gibbs Free Energy - (Measured in Joule) - Ideal Gas Gibbs Free Energy is the Gibbs energy in an ideal condition.
Temperature - (Measured in Kelvin) - Temperature is the degree or intensity of heat present in a substance or object.

STEP 1: Convert Input(s) to Base Unit

Gibbs Free Energy: 228.61 Joule --> 228.61 Joule No Conversion Required
Ideal Gas Gibbs Free Energy: 95 Joule --> 95 Joule No Conversion Required
Temperature: 450 Kelvin --> 450 Kelvin No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

ϕ = exp((G-G^ig)/([R]*T)) --> exp((228.61-95)/([R]*450))

Evaluating ... ...

ϕ = 1.03635546567344

STEP 3: Convert Result to Output's Unit

1.03635546567344 --> No Conversion Required

FINAL ANSWER

1.03635546567344 ≈ 1.036355 <-- Fugacity Coefficient

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Chemical Engineering » Thermodynamics » Solution Thermodynamics » Fugacity and Fugacity Coefficient » Fugacity and Fugacity Coefficient using Residual Gibbs Energy » Fugacity and Fugacity Coefficient » Fugacity Coefficient using Gibbs Free Energy and Ideal Gibbs Free Energy

Credits

Created by Shivam Sinha

National Institute Of Technology (NIT), Surathkal

Shivam Sinha has created this Calculator and 300+ more calculators!

Verified by Pragati Jaju

College Of Engineering (COEP), Pune

Pragati Jaju has verified this Calculator and 200+ more calculators!

< Fugacity and Fugacity Coefficient Calculators

Gibbs Free Energy using Ideal Gibbs Free Energy and Fugacity Coefficient

LaTeX Go Gibbs Free Energy = Ideal Gas Gibbs Free Energy+[R]*Temperature*ln(Fugacity Coefficient)

Temperature using Residual Gibbs Free Energy and Fugacity Coefficient

LaTeX Go Temperature = modulus(Residual Gibbs Free Energy/([R]*ln(Fugacity Coefficient)))

Fugacity Coefficient using Residual Gibbs Free Energy

LaTeX Go Fugacity Coefficient = exp(Residual Gibbs Free Energy/([R]*Temperature))

Residual Gibbs Free Energy using Fugacity Coefficient

LaTeX Go Residual Gibbs Free Energy = [R]*Temperature*ln(Fugacity Coefficient)

Fugacity Coefficient using Gibbs Free Energy and Ideal Gibbs Free Energy Formula

LaTeX Go

Fugacity Coefficient = exp((Gibbs Free Energy-Ideal Gas Gibbs Free Energy)/([R]*Temperature))
ϕ = exp((G-G^ig)/([R]*T))

What is Gibbs Free Energy?

The Gibbs free energy (or Gibbs energy) is a thermodynamic potential that can be used to calculate the maximum reversible work that may be performed by a thermodynamic system at a constant temperature and pressure. The Gibbs free energy measured in joules in SI) is the maximum amount of non-expansion work that can be extracted from a thermodynamically closed system (can exchange heat and work with its surroundings, but not matter). This maximum can be attained only in a completely reversible process. When a system transforms reversibly from an initial state to a final state, the decrease in Gibbs free energy equals the work done by the system to its surroundings, minus the work of the pressure forces.

What is Duhem’s Theorem?

For any closed system formed from known amounts of prescribed chemical species, the equilibrium state is completely determined when any two independent variables are fixed. The two independent variables subject to specification may in general be either intensive or extensive. However, the number of independent intensive variables is given by the phase rule. Thus when F = 1, at least one of the two variables must be extensive, and when F = 0, both must be extensive.

How to Calculate Fugacity Coefficient using Gibbs Free Energy and Ideal Gibbs Free Energy?

Fugacity Coefficient using Gibbs Free Energy and Ideal Gibbs Free Energy calculator uses Fugacity Coefficient = exp((Gibbs Free Energy-Ideal Gas Gibbs Free Energy)/([R]*Temperature)) to calculate the Fugacity Coefficient, The Fugacity Coefficient using Gibbs Free Energy and Ideal Gibbs Free Energy formula is defined as the exponential of the ratio of the difference of actual Gibbs free energy by the ideal Gibbs free energy to the product of universal gas constant and temperature. Fugacity Coefficient is denoted by ϕ symbol.

How to calculate Fugacity Coefficient using Gibbs Free Energy and Ideal Gibbs Free Energy using this online calculator? To use this online calculator for Fugacity Coefficient using Gibbs Free Energy and Ideal Gibbs Free Energy, enter Gibbs Free Energy (G), Ideal Gas Gibbs Free Energy (G^ig) & Temperature (T) and hit the calculate button. Here is how the Fugacity Coefficient using Gibbs Free Energy and Ideal Gibbs Free Energy calculation can be explained with given input values -> 1.036355 = exp((228.61-95)/([R]*450)).

FAQ

What is Fugacity Coefficient using Gibbs Free Energy and Ideal Gibbs Free Energy?

The Fugacity Coefficient using Gibbs Free Energy and Ideal Gibbs Free Energy formula is defined as the exponential of the ratio of the difference of actual Gibbs free energy by the ideal Gibbs free energy to the product of universal gas constant and temperature and is represented as ϕ = exp((G-G^ig)/([R]*T)) or Fugacity Coefficient = exp((Gibbs Free Energy-Ideal Gas Gibbs Free Energy)/([R]*Temperature)). Gibbs Free Energy is a thermodynamic potential that can be used to calculate the maximum of reversible work that may be performed by a thermodynamic system at a constant temperature and pressure, Ideal Gas Gibbs Free Energy is the Gibbs energy in an ideal condition & Temperature is the degree or intensity of heat present in a substance or object.

How to calculate Fugacity Coefficient using Gibbs Free Energy and Ideal Gibbs Free Energy?

The Fugacity Coefficient using Gibbs Free Energy and Ideal Gibbs Free Energy formula is defined as the exponential of the ratio of the difference of actual Gibbs free energy by the ideal Gibbs free energy to the product of universal gas constant and temperature is calculated using Fugacity Coefficient = exp((Gibbs Free Energy-Ideal Gas Gibbs Free Energy)/([R]*Temperature)). To calculate Fugacity Coefficient using Gibbs Free Energy and Ideal Gibbs Free Energy, you need Gibbs Free Energy (G), Ideal Gas Gibbs Free Energy (G^ig) & Temperature (T). With our tool, you need to enter the respective value for Gibbs Free Energy, Ideal Gas Gibbs Free Energy & Temperature and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Fugacity Coefficient?

In this formula, Fugacity Coefficient uses Gibbs Free Energy, Ideal Gas Gibbs Free Energy & Temperature. We can use 1 other way(s) to calculate the same, which is/are as follows -

Fugacity Coefficient = exp(Residual Gibbs Free Energy/([R]*Temperature))

Home

FREE PDFs

🔍 Search