Friction Torque on Cone Clutch from Constant Wear Theory given Semi-Cone Angle Calculator

✖Coefficient of Friction Clutch is a value that represents the frictional force between the clutch and the flywheel in a constant wear theory scenario.ⓘ Coefficient of Friction Clutch [μ]			+10% -10%
✖Permissible Intensity of Pressure in Clutch is the maximum allowed pressure in a clutch, ensuring efficient power transmission without wear and tear, according to constant wear theory.ⓘ Permissible Intensity of Pressure in Clutch [p_a]			+10% -10%
✖Inner Diameter of Clutch is the diameter of the clutch that remains constant during the wear process, affecting the clutch's performance and lifespan.ⓘ Inner Diameter of Clutch [d_i]			+10% -10%
✖Outer Diameter of Clutch is the maximum diameter of the clutch that remains constant during the wear process in the constant wear theory.ⓘ Outer Diameter of Clutch [d_o]			+10% -10%
✖Semi-Cone Angle of Clutch is the angle at which the clutch wears out uniformly according to the Constant Wear Theory in a semi-cone shaped clutch.ⓘ Semi-Cone Angle of Clutch [α]			+10% -10%

✖Friction Torque on Clutch is the rotational force that opposes motion between the clutch's moving parts, affecting its performance and wear in a mechanical system.ⓘ Friction Torque on Cone Clutch from Constant Wear Theory given Semi-Cone Angle [M_T]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Constant Wear Theory Formulas PDF PDF Image

Friction Torque on Cone Clutch from Constant Wear Theory given Semi-Cone Angle Solution

STEP 0: Pre-Calculation Summary

Formula Used

Friction Torque on Clutch = pi*Coefficient of Friction Clutch*Permissible Intensity of Pressure in Clutch*Inner Diameter of Clutch*((Outer Diameter of Clutch^2)-(Inner Diameter of Clutch^2))/(8*sin(Semi-Cone Angle of Clutch))
M_T = pi*μ*p_a*d_i*((d_o^2)-(d_i^2))/(8*sin(α))
This formula uses 1 Constants, 1 Functions, 6 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Functions Used

sin - Sine is a trigonometric function that describes the ratio of the length of the opposite side of a right triangle to the length of the hypotenuse., sin(Angle)

Variables Used

Friction Torque on Clutch - (Measured in Newton Meter) - Friction Torque on Clutch is the rotational force that opposes motion between the clutch's moving parts, affecting its performance and wear in a mechanical system.
Coefficient of Friction Clutch - Coefficient of Friction Clutch is a value that represents the frictional force between the clutch and the flywheel in a constant wear theory scenario.
Permissible Intensity of Pressure in Clutch - (Measured in Pascal) - Permissible Intensity of Pressure in Clutch is the maximum allowed pressure in a clutch, ensuring efficient power transmission without wear and tear, according to constant wear theory.
Inner Diameter of Clutch - (Measured in Meter) - Inner Diameter of Clutch is the diameter of the clutch that remains constant during the wear process, affecting the clutch's performance and lifespan.
Outer Diameter of Clutch - (Measured in Meter) - Outer Diameter of Clutch is the maximum diameter of the clutch that remains constant during the wear process in the constant wear theory.
Semi-Cone Angle of Clutch - (Measured in Radian) - Semi-Cone Angle of Clutch is the angle at which the clutch wears out uniformly according to the Constant Wear Theory in a semi-cone shaped clutch.

STEP 1: Convert Input(s) to Base Unit

Coefficient of Friction Clutch: 0.2 --> No Conversion Required
Permissible Intensity of Pressure in Clutch: 1.012225 Newton per Square Millimeter --> 1012225 Pascal (Check conversion here)
Inner Diameter of Clutch: 100 Millimeter --> 0.1 Meter (Check conversion here)
Outer Diameter of Clutch: 200 Millimeter --> 0.2 Meter (Check conversion here)
Semi-Cone Angle of Clutch: 89.9 Degree --> 1.56905099754261 Radian (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

M_T = pi*μ*p_a*d_i*((d_o^2)-(d_i^2))/(8*sin(α)) --> pi*0.2*1012225*0.1*((0.2^2)-(0.1^2))/(8*sin(1.56905099754261))

Evaluating ... ...

M_T = 238.500260040072

STEP 3: Convert Result to Output's Unit

238.500260040072 Newton Meter -->238500.260040072 Newton Millimeter (Check conversion here)

FINAL ANSWER

238500.260040072 ≈ 238500.3 Newton Millimeter <-- Friction Torque on Clutch

(Calculation completed in 00.009 seconds)

You are here -

Home » Physics » Design of Automobile Elements » Design of Friction Clutches » Mechanical » Constant Wear Theory » Friction Torque on Cone Clutch from Constant Wear Theory given Semi-Cone Angle

Credits

Created by Vaibhav Malani

National Institute of Technology (NIT), Tiruchirapalli

Vaibhav Malani has created this Calculator and 600+ more calculators!

Verified by Sagar S Kulkarni

Dayananda Sagar College of Engineering (DSCE), Bengaluru

Sagar S Kulkarni has verified this Calculator and 200+ more calculators!

< Constant Wear Theory Calculators

Coefficient of Friction of Clutch from Constant Wear Theory

LaTeX Go Coefficient of Friction Clutch = 8*Friction Torque on Clutch/(pi*Permissible Intensity of Pressure in Clutch*Inner Diameter of Clutch*((Outer Diameter of Clutch^2)-(Inner Diameter of Clutch^2)))

Permissible Pressure Intensity on Clutch from Constant Wear Theory given Axial Force

LaTeX Go Permissible Intensity of Pressure in Clutch = 2*Axial Force for Clutch/(pi*Inner Diameter of Clutch*(Outer Diameter of Clutch-Inner Diameter of Clutch))

Axial Force on Clutch from Constant Wear Theory given Permissible Intensity of Pressure

LaTeX Go Axial Force for Clutch = pi*Permissible Intensity of Pressure in Clutch*Inner Diameter of Clutch*(Outer Diameter of Clutch-Inner Diameter of Clutch)/2

Axial Force on Clutch from Constant Wear Theory given Friction Torque

LaTeX Go Axial Force for Clutch = 4*Friction Torque on Clutch/(Coefficient of Friction Clutch*(Outer Diameter of Clutch+Inner Diameter of Clutch))

Friction Torque on Cone Clutch from Constant Wear Theory given Semi-Cone Angle Formula

LaTeX Go

What is Friction Torque on Multiple Disk Clutch?

Friction torque on a multiple disk clutch refers to the resistive torque generated by the frictional forces between the disks when the clutch is engaged. It is the torque required to overcome the friction between the contacting surfaces of multiple disks in the clutch assembly during rotation. This friction torque is crucial for transmitting power efficiently from the engine to the transmission system in vehicles and machinery.

How to Calculate Friction Torque on Cone Clutch from Constant Wear Theory given Semi-Cone Angle?

Friction Torque on Cone Clutch from Constant Wear Theory given Semi-Cone Angle calculator uses Friction Torque on Clutch = pi*Coefficient of Friction Clutch*Permissible Intensity of Pressure in Clutch*Inner Diameter of Clutch*((Outer Diameter of Clutch^2)-(Inner Diameter of Clutch^2))/(8*sin(Semi-Cone Angle of Clutch)) to calculate the Friction Torque on Clutch, Friction Torque on Cone Clutch from Constant Wear Theory given Semi-Cone Angle formula is defined as the measure of rotational force that opposes motion in a cone clutch system, influenced by the semi-cone angle, and is a critical parameter in the design and optimization of cone clutches in various mechanical systems. Friction Torque on Clutch is denoted by M_T symbol.

How to calculate Friction Torque on Cone Clutch from Constant Wear Theory given Semi-Cone Angle using this online calculator? To use this online calculator for Friction Torque on Cone Clutch from Constant Wear Theory given Semi-Cone Angle, enter Coefficient of Friction Clutch (μ), Permissible Intensity of Pressure in Clutch (p_a), Inner Diameter of Clutch (d_i), Outer Diameter of Clutch (d_o) & Semi-Cone Angle of Clutch (α) and hit the calculate button. Here is how the Friction Torque on Cone Clutch from Constant Wear Theory given Semi-Cone Angle calculation can be explained with given input values -> 2.4E+8 = pi*0.2*1012225*0.1*((0.2^2)-(0.1^2))/(8*sin(1.56905099754261)).

FAQ

What is Friction Torque on Cone Clutch from Constant Wear Theory given Semi-Cone Angle?

Friction Torque on Cone Clutch from Constant Wear Theory given Semi-Cone Angle formula is defined as the measure of rotational force that opposes motion in a cone clutch system, influenced by the semi-cone angle, and is a critical parameter in the design and optimization of cone clutches in various mechanical systems and is represented as M_T = pi*μ*p_a*d_i*((d_o^2)-(d_i^2))/(8*sin(α)) or Friction Torque on Clutch = pi*Coefficient of Friction Clutch*Permissible Intensity of Pressure in Clutch*Inner Diameter of Clutch*((Outer Diameter of Clutch^2)-(Inner Diameter of Clutch^2))/(8*sin(Semi-Cone Angle of Clutch)). Coefficient of Friction Clutch is a value that represents the frictional force between the clutch and the flywheel in a constant wear theory scenario, Permissible Intensity of Pressure in Clutch is the maximum allowed pressure in a clutch, ensuring efficient power transmission without wear and tear, according to constant wear theory, Inner Diameter of Clutch is the diameter of the clutch that remains constant during the wear process, affecting the clutch's performance and lifespan, Outer Diameter of Clutch is the maximum diameter of the clutch that remains constant during the wear process in the constant wear theory & Semi-Cone Angle of Clutch is the angle at which the clutch wears out uniformly according to the Constant Wear Theory in a semi-cone shaped clutch.

How to calculate Friction Torque on Cone Clutch from Constant Wear Theory given Semi-Cone Angle?

Friction Torque on Cone Clutch from Constant Wear Theory given Semi-Cone Angle formula is defined as the measure of rotational force that opposes motion in a cone clutch system, influenced by the semi-cone angle, and is a critical parameter in the design and optimization of cone clutches in various mechanical systems is calculated using Friction Torque on Clutch = pi*Coefficient of Friction Clutch*Permissible Intensity of Pressure in Clutch*Inner Diameter of Clutch*((Outer Diameter of Clutch^2)-(Inner Diameter of Clutch^2))/(8*sin(Semi-Cone Angle of Clutch)). To calculate Friction Torque on Cone Clutch from Constant Wear Theory given Semi-Cone Angle, you need Coefficient of Friction Clutch (μ), Permissible Intensity of Pressure in Clutch (p_a), Inner Diameter of Clutch (d_i), Outer Diameter of Clutch (d_o) & Semi-Cone Angle of Clutch (α). With our tool, you need to enter the respective value for Coefficient of Friction Clutch, Permissible Intensity of Pressure in Clutch, Inner Diameter of Clutch, Outer Diameter of Clutch & Semi-Cone Angle of Clutch and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Friction Torque on Clutch?

In this formula, Friction Torque on Clutch uses Coefficient of Friction Clutch, Permissible Intensity of Pressure in Clutch, Inner Diameter of Clutch, Outer Diameter of Clutch & Semi-Cone Angle of Clutch. We can use 3 other way(s) to calculate the same, which is/are as follows -

Friction Torque on Clutch = Coefficient of Friction Clutch*Operating Force for Clutch*(Outer Diameter of Clutch+Inner Diameter of Clutch)/(4*sin(Semi-Cone Angle of Clutch))
Friction Torque on Clutch = Coefficient of Friction Clutch*Operating Force for Clutch*Pairs of Contacting Surface of Clutch*(Outer Diameter of Clutch+Inner Diameter of Clutch)/4
Friction Torque on Clutch = pi*Coefficient of Friction Clutch*Permissible Intensity of Pressure in Clutch*Inner Diameter of Clutch*((Outer Diameter of Clutch^2)-(Inner Diameter of Clutch^2))/8

Home

FREE PDFs

🔍 Search