Fore Bearing in Whole Circle Bearing System Solution

STEP 0: Pre-Calculation Summary
Formula Used
Fore Bearing = (Back Bearing-(180*pi/180))
FB = (BB-(180*pi/180))
This formula uses 1 Constants, 2 Variables
Constants Used
pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288
Variables Used
Fore Bearing - (Measured in Radian) - Fore Bearing is the bearing of a line in the direction of progress of the survey.
Back Bearing - (Measured in Radian) - Back Bearing is the bearing of a line in the opposite direction of progress of the survey.
STEP 1: Convert Input(s) to Base Unit
Back Bearing: 54 Radian --> 54 Radian No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
FB = (BB-(180*pi/180)) --> (54-(180*pi/180))
Evaluating ... ...
FB = 50.8584073464102
STEP 3: Convert Result to Output's Unit
50.8584073464102 Radian --> No Conversion Required
FINAL ANSWER
50.8584073464102 50.85841 Radian <-- Fore Bearing
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Chandana P Dev
NSS College of Engineering (NSSCE), Palakkad
Chandana P Dev has created this Calculator and 500+ more calculators!
Verifier Image
Verified by Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has verified this Calculator and 2600+ more calculators!

Compass Surveying Calculators

Included Angle when Bearings are Measured in Same Side of Different Meridian
​ LaTeX ​ Go Included Angle = (180*pi/180)-(Fore Bearing of Previous Line+Back Bearing of Previous Line)
Included Angle when Bearings are Measured in Opposite Side of Common Meridian
​ LaTeX ​ Go Included Angle when Bearings are in Opposite Side = Back Bearing of Previous Line+Fore Bearing of Previous Line
Included Angle from Two Lines
​ LaTeX ​ Go Included Angle = Fore Bearing of Previous Line-Back Bearing of Previous Line
Fore Bearing in Whole Circle Bearing System
​ LaTeX ​ Go Fore Bearing = (Back Bearing-(180*pi/180))

Fore Bearing in Whole Circle Bearing System Formula

​LaTeX ​Go
Fore Bearing = (Back Bearing-(180*pi/180))
FB = (BB-(180*pi/180))

What is a Whole Circle Bearing System?

A whole circle bearing system is a method used in surveying and navigation to determine the direction or bearing of one point from another.

How to Calculate Fore Bearing in Whole Circle Bearing System?

Fore Bearing in Whole Circle Bearing System calculator uses Fore Bearing = (Back Bearing-(180*pi/180)) to calculate the Fore Bearing, The Fore Bearing in Whole Circle Bearing System formula is defined as the bearing of a line in the direction of the progress of the survey. Plus, sign is used if the fore bearing is less than 180°, and a minus sign if it is more than 180°. Fore Bearing is denoted by FB symbol.

How to calculate Fore Bearing in Whole Circle Bearing System using this online calculator? To use this online calculator for Fore Bearing in Whole Circle Bearing System, enter Back Bearing (BB) and hit the calculate button. Here is how the Fore Bearing in Whole Circle Bearing System calculation can be explained with given input values -> 50.85841 = (54-(180*pi/180)).

FAQ

What is Fore Bearing in Whole Circle Bearing System?
The Fore Bearing in Whole Circle Bearing System formula is defined as the bearing of a line in the direction of the progress of the survey. Plus, sign is used if the fore bearing is less than 180°, and a minus sign if it is more than 180° and is represented as FB = (BB-(180*pi/180)) or Fore Bearing = (Back Bearing-(180*pi/180)). Back Bearing is the bearing of a line in the opposite direction of progress of the survey.
How to calculate Fore Bearing in Whole Circle Bearing System?
The Fore Bearing in Whole Circle Bearing System formula is defined as the bearing of a line in the direction of the progress of the survey. Plus, sign is used if the fore bearing is less than 180°, and a minus sign if it is more than 180° is calculated using Fore Bearing = (Back Bearing-(180*pi/180)). To calculate Fore Bearing in Whole Circle Bearing System, you need Back Bearing (BB). With our tool, you need to enter the respective value for Back Bearing and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!