Force on Lever of Simple Band Brake for Clockwise Rotation of Drum Calculator

✖Tension in Tight Side of the Band is the force exerted on the tight side of a band, typically measured in units of newtons or pounds per square inch.ⓘ Tension in Tight Side of the Band [T₁]			+10% -10%
✖Perpendicular Distance from Fulcrum is the shortest distance from the fulcrum to the line of action of the force in a lever system.ⓘ Perpendicular Distance from Fulcrum [b]			+10% -10%
✖Distance b/w Fulcrum and End of Lever is known as the lever arm or moment arm. It determines the lever's mechanical advantage by influencing the force required to lift or move an object.ⓘ Distance b/w Fulcrum and End of Lever [l]			+10% -10%

✖Force Applied at the End of the Lever is the force exerted at the end of a lever, which is a rigid bar used to multiply force.ⓘ Force on Lever of Simple Band Brake for Clockwise Rotation of Drum [P]

⎘ Copy

👎

Formula

✖

Force on Lever of Simple Band Brake for Clockwise Rotation of Drum

Formula

P = \frac{T 1 \cdot b}{l}

Example

32.72727 N = \frac{720 N \cdot .05 m}{1.1 m}

Calculator

LaTeX

Reset

👍

Download Force Formulas PDF PDF Image

Force on Lever of Simple Band Brake for Clockwise Rotation of Drum Solution

STEP 0: Pre-Calculation Summary

Formula Used

Force Applied at the End of the Lever = (Tension in Tight Side of the Band*Perpendicular Distance from Fulcrum)/Distance b/w Fulcrum and End of Lever
P = (T₁*b)/l
This formula uses 4 Variables

Variables Used

Force Applied at the End of the Lever - (Measured in Newton) - Force Applied at the End of the Lever is the force exerted at the end of a lever, which is a rigid bar used to multiply force.
Tension in Tight Side of the Band - (Measured in Newton) - Tension in Tight Side of the Band is the force exerted on the tight side of a band, typically measured in units of newtons or pounds per square inch.
Perpendicular Distance from Fulcrum - (Measured in Meter) - Perpendicular Distance from Fulcrum is the shortest distance from the fulcrum to the line of action of the force in a lever system.
Distance b/w Fulcrum and End of Lever - (Measured in Meter) - Distance b/w Fulcrum and End of Lever is known as the lever arm or moment arm. It determines the lever's mechanical advantage by influencing the force required to lift or move an object.

STEP 1: Convert Input(s) to Base Unit

Tension in Tight Side of the Band: 720 Newton --> 720 Newton No Conversion Required
Perpendicular Distance from Fulcrum: 0.05 Meter --> 0.05 Meter No Conversion Required
Distance b/w Fulcrum and End of Lever: 1.1 Meter --> 1.1 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P = (T₁*b)/l --> (720*0.05)/1.1

Evaluating ... ...

P = 32.7272727272727

STEP 3: Convert Result to Output's Unit

32.7272727272727 Newton --> No Conversion Required

FINAL ANSWER

32.7272727272727 ≈ 32.72727 Newton <-- Force Applied at the End of the Lever

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Theory of Machine » Brakes and Dynamometers » Mechanical » Force » Force on Lever of Simple Band Brake for Clockwise Rotation of Drum

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Dipto Mandal

Indian Institute of Information Technology (IIIT), Guwahati

Dipto Mandal has verified this Calculator and 400+ more calculators!

< Force Calculators

Force on Lever of Simple Band Brake for Anticlockwise Rotation of Drum

Go Force Applied at the End of the Lever = (Tension in the Slack Side of Band*Perpendicular Distance from Fulcrum)/Distance b/w Fulcrum and End of Lever

Force on Lever of Simple Band Brake for Clockwise Rotation of Drum

Go Force Applied at the End of the Lever = (Tension in Tight Side of the Band*Perpendicular Distance from Fulcrum)/Distance b/w Fulcrum and End of Lever

Maximum Braking Force Acting at Front Wheels when Brakes are Applied to Front Wheels only

Go Braking Force = Coefficient of Friction for Brake*Normal Reaction between Ground and Front Wheel

Braking Force on Drum for Simple Band Brake

Go Braking Force = Tension in Tight Side of the Band-Tension in the Slack Side of Band

Force on Lever of Simple Band Brake for Clockwise Rotation of Drum Formula

Force Applied at the End of the Lever = (Tension in Tight Side of the Band*Perpendicular Distance from Fulcrum)/Distance b/w Fulcrum and End of Lever
P = (T₁*b)/l

What is Force?

Force is a push or pull exerted on an object that can cause it to move, change its direction, or alter its shape. It is a fundamental concept in physics, influencing the motion and behavior of objects.

How to Calculate Force on Lever of Simple Band Brake for Clockwise Rotation of Drum?

Force on Lever of Simple Band Brake for Clockwise Rotation of Drum calculator uses Force Applied at the End of the Lever = (Tension in Tight Side of the Band*Perpendicular Distance from Fulcrum)/Distance b/w Fulcrum and End of Lever to calculate the Force Applied at the End of the Lever, Force on Lever of Simple Band Brake for Clockwise Rotation of Drum formula is defined as the measure of the force exerted on the lever of a simple band brake when the drum rotates in a clockwise direction, which is essential in understanding the mechanical advantage of the brake system. Force Applied at the End of the Lever is denoted by P symbol.

How to calculate Force on Lever of Simple Band Brake for Clockwise Rotation of Drum using this online calculator? To use this online calculator for Force on Lever of Simple Band Brake for Clockwise Rotation of Drum, enter Tension in Tight Side of the Band (T₁), Perpendicular Distance from Fulcrum (b) & Distance b/w Fulcrum and End of Lever (l) and hit the calculate button. Here is how the Force on Lever of Simple Band Brake for Clockwise Rotation of Drum calculation can be explained with given input values -> 32.72727 = (720*0.05)/1.1.

FAQ

What is Force on Lever of Simple Band Brake for Clockwise Rotation of Drum?

Force on Lever of Simple Band Brake for Clockwise Rotation of Drum formula is defined as the measure of the force exerted on the lever of a simple band brake when the drum rotates in a clockwise direction, which is essential in understanding the mechanical advantage of the brake system and is represented as P = (T₁*b)/l or Force Applied at the End of the Lever = (Tension in Tight Side of the Band*Perpendicular Distance from Fulcrum)/Distance b/w Fulcrum and End of Lever. Tension in Tight Side of the Band is the force exerted on the tight side of a band, typically measured in units of newtons or pounds per square inch, Perpendicular Distance from Fulcrum is the shortest distance from the fulcrum to the line of action of the force in a lever system & Distance b/w Fulcrum and End of Lever is known as the lever arm or moment arm. It determines the lever's mechanical advantage by influencing the force required to lift or move an object.

How to calculate Force on Lever of Simple Band Brake for Clockwise Rotation of Drum?

Force on Lever of Simple Band Brake for Clockwise Rotation of Drum formula is defined as the measure of the force exerted on the lever of a simple band brake when the drum rotates in a clockwise direction, which is essential in understanding the mechanical advantage of the brake system is calculated using Force Applied at the End of the Lever = (Tension in Tight Side of the Band*Perpendicular Distance from Fulcrum)/Distance b/w Fulcrum and End of Lever. To calculate Force on Lever of Simple Band Brake for Clockwise Rotation of Drum, you need Tension in Tight Side of the Band (T₁), Perpendicular Distance from Fulcrum (b) & Distance b/w Fulcrum and End of Lever (l). With our tool, you need to enter the respective value for Tension in Tight Side of the Band, Perpendicular Distance from Fulcrum & Distance b/w Fulcrum and End of Lever and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Force Applied at the End of the Lever?

In this formula, Force Applied at the End of the Lever uses Tension in Tight Side of the Band, Perpendicular Distance from Fulcrum & Distance b/w Fulcrum and End of Lever. We can use 1 other way(s) to calculate the same, which is/are as follows -

Force Applied at the End of the Lever = (Tension in the Slack Side of Band*Perpendicular Distance from Fulcrum)/Distance b/w Fulcrum and End of Lever

Home

FREE PDFs

🔍 Search