Force in Parallel Fillet Weld given Shear Stress Calculator

✖Shear stress in parallel fillet weld is the force tending to cause deformation of the fillet weld by slippage along a plane or planes parallel to the imposed stress.ⓘ Shear Stress in Parallel Fillet Weld [𝜏]			+10% -10%
✖The Length of Weld is the linear distance of the welding segment joined by the welded joint.ⓘ Length of Weld [L]			+10% -10%
✖The Leg of Weld is the distance from the joint root to the toe of the weld.ⓘ Leg of Weld [h_l]			+10% -10%
✖Weld Cut Angle is the angle at which the weld is cut with the horizontal.ⓘ Weld Cut Angle [θ]			+10% -10%

✖Load on Parallel Fillet Weld is the force, or the load applied perpendicular to the specimen cross-section.ⓘ Force in Parallel Fillet Weld given Shear Stress [P_f]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Parallel Fillet Welds Formulas PDF PDF Image

Force in Parallel Fillet Weld given Shear Stress Solution

STEP 0: Pre-Calculation Summary

Formula Used

Load on Parallel Fillet Weld = Shear Stress in Parallel Fillet Weld*Length of Weld*Leg of Weld/(sin(Weld Cut Angle)+cos(Weld Cut Angle))
P_f = 𝜏*L*h_l/(sin(θ)+cos(θ))
This formula uses 2 Functions, 5 Variables

Functions Used

sin - Sine is a trigonometric function that describes the ratio of the length of the opposite side of a right triangle to the length of the hypotenuse., sin(Angle)
cos - Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle., cos(Angle)

Variables Used

Load on Parallel Fillet Weld - (Measured in Newton) - Load on Parallel Fillet Weld is the force, or the load applied perpendicular to the specimen cross-section.
Shear Stress in Parallel Fillet Weld - (Measured in Pascal) - Shear stress in parallel fillet weld is the force tending to cause deformation of the fillet weld by slippage along a plane or planes parallel to the imposed stress.
Length of Weld - (Measured in Meter) - The Length of Weld is the linear distance of the welding segment joined by the welded joint.
Leg of Weld - (Measured in Meter) - The Leg of Weld is the distance from the joint root to the toe of the weld.
Weld Cut Angle - (Measured in Radian) - Weld Cut Angle is the angle at which the weld is cut with the horizontal.

STEP 1: Convert Input(s) to Base Unit

Shear Stress in Parallel Fillet Weld: 38 Newton per Square Millimeter --> 38000000 Pascal (Check conversion here)
Length of Weld: 195 Millimeter --> 0.195 Meter (Check conversion here)
Leg of Weld: 21.2 Millimeter --> 0.0212 Meter (Check conversion here)
Weld Cut Angle: 45 Degree --> 0.785398163397301 Radian (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P_f = 𝜏*L*h_l/(sin(θ)+cos(θ)) --> 38000000*0.195*0.0212/(sin(0.785398163397301)+cos(0.785398163397301))

Evaluating ... ...

P_f = 111080.818470157

STEP 3: Convert Result to Output's Unit

111080.818470157 Newton --> No Conversion Required

FINAL ANSWER

111080.818470157 ≈ 111080.8 Newton <-- Load on Parallel Fillet Weld

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Welded Joints » Mechanical » Parallel Fillet Welds » Force in Parallel Fillet Weld given Shear Stress

Credits

Created by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has created this Calculator and 300+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< Parallel Fillet Welds Calculators

Shear Stress in Double Parallel Fillet Weld

Go Shear Stress in Double Parallel Fillet Weld = Load on Double Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld)

Shear Stress in Parallel Fillet Weld

LaTeX Go Shear Stress in Parallel Fillet Weld = Load on Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld)

Leg of Parallel Fillet Weld given Throat of Weld

LaTeX Go Leg of Weld = Throat Thickness of Weld/cos(pi/4)

Throat of Parallel Fillet Weld

LaTeX Go Throat Thickness of Weld = Leg of Weld*cos(pi/4)

Force in Parallel Fillet Weld given Shear Stress Formula

LaTeX Go

Load on Parallel Fillet Weld = Shear Stress in Parallel Fillet Weld*Length of Weld*Leg of Weld/(sin(Weld Cut Angle)+cos(Weld Cut Angle))
P_f = 𝜏*L*h_l/(sin(θ)+cos(θ))

What is a force? What are its units?

a force is any interaction that, when unopposed, will change the motion of an object. A force can cause an object with mass to change its velocity (which includes to begin moving from a state of rest). Its units are Newton, Dyne m/s₂

How to Calculate Force in Parallel Fillet Weld given Shear Stress?

Force in Parallel Fillet Weld given Shear Stress calculator uses Load on Parallel Fillet Weld = Shear Stress in Parallel Fillet Weld*Length of Weld*Leg of Weld/(sin(Weld Cut Angle)+cos(Weld Cut Angle)) to calculate the Load on Parallel Fillet Weld, Force in Parallel Fillet Weld given Shear Stress is the force or the load acting on the parallel fillet weld. Load on Parallel Fillet Weld is denoted by P_f symbol.

How to calculate Force in Parallel Fillet Weld given Shear Stress using this online calculator? To use this online calculator for Force in Parallel Fillet Weld given Shear Stress, enter Shear Stress in Parallel Fillet Weld (𝜏), Length of Weld (L), Leg of Weld (h_l) & Weld Cut Angle (θ) and hit the calculate button. Here is how the Force in Parallel Fillet Weld given Shear Stress calculation can be explained with given input values -> 111080.8 = 38000000*0.195*0.0212/(sin(0.785398163397301)+cos(0.785398163397301)).

FAQ

What is Force in Parallel Fillet Weld given Shear Stress?

Force in Parallel Fillet Weld given Shear Stress is the force or the load acting on the parallel fillet weld and is represented as P_f = 𝜏*L*h_l/(sin(θ)+cos(θ)) or Load on Parallel Fillet Weld = Shear Stress in Parallel Fillet Weld*Length of Weld*Leg of Weld/(sin(Weld Cut Angle)+cos(Weld Cut Angle)). Shear stress in parallel fillet weld is the force tending to cause deformation of the fillet weld by slippage along a plane or planes parallel to the imposed stress, The Length of Weld is the linear distance of the welding segment joined by the welded joint, The Leg of Weld is the distance from the joint root to the toe of the weld & Weld Cut Angle is the angle at which the weld is cut with the horizontal.

How to calculate Force in Parallel Fillet Weld given Shear Stress?

Force in Parallel Fillet Weld given Shear Stress is the force or the load acting on the parallel fillet weld is calculated using Load on Parallel Fillet Weld = Shear Stress in Parallel Fillet Weld*Length of Weld*Leg of Weld/(sin(Weld Cut Angle)+cos(Weld Cut Angle)). To calculate Force in Parallel Fillet Weld given Shear Stress, you need Shear Stress in Parallel Fillet Weld (𝜏), Length of Weld (L), Leg of Weld (h_l) & Weld Cut Angle (θ). With our tool, you need to enter the respective value for Shear Stress in Parallel Fillet Weld, Length of Weld, Leg of Weld & Weld Cut Angle and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Load on Parallel Fillet Weld?

In this formula, Load on Parallel Fillet Weld uses Shear Stress in Parallel Fillet Weld, Length of Weld, Leg of Weld & Weld Cut Angle. We can use 1 other way(s) to calculate the same, which is/are as follows -

Load on Parallel Fillet Weld = Shear Stress in Parallel Fillet Weld*Length of Weld*Leg of Weld*0.707

Home

FREE PDFs

🔍 Search