Force at Point 1 using Pascal's Law Calculator

✖Force at Point 2 is defined as the push or pull on an object with mass causes it to change its velocity at point 2.ⓘ Force at Point 2 [F₂]			+10% -10%
✖Area at Point 1 is defined as the cross sectional area at point 1.ⓘ Area at Point 1 [A₁]			+10% -10%
✖Area at Point 2 is defined as the cross sectional area at point 2.ⓘ Area at Point 2 [A₂]			+10% -10%

✖Force at Point 1 is defined as the push or pull on an object with mass causes it to change its velocity at point 1.ⓘ Force at Point 1 using Pascal's Law [F₁]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Chemical Engineering Formula PDF PDF Image

Force at Point 1 using Pascal's Law Solution

STEP 0: Pre-Calculation Summary

Formula Used

Force at Point 1 = Force at Point 2*(Area at Point 1/Area at Point 2)
F₁ = F₂*(A₁/A₂)
This formula uses 4 Variables

Variables Used

Force at Point 1 - (Measured in Newton) - Force at Point 1 is defined as the push or pull on an object with mass causes it to change its velocity at point 1.
Force at Point 2 - (Measured in Newton) - Force at Point 2 is defined as the push or pull on an object with mass causes it to change its velocity at point 2.
Area at Point 1 - (Measured in Square Meter) - Area at Point 1 is defined as the cross sectional area at point 1.
Area at Point 2 - (Measured in Square Meter) - Area at Point 2 is defined as the cross sectional area at point 2.

STEP 1: Convert Input(s) to Base Unit

Force at Point 2: 12.45 Newton --> 12.45 Newton No Conversion Required
Area at Point 1: 23 Square Meter --> 23 Square Meter No Conversion Required
Area at Point 2: 24 Square Meter --> 24 Square Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

F₁ = F₂*(A₁/A₂) --> 12.45*(23/24)

Evaluating ... ...

F₁ = 11.93125

STEP 3: Convert Result to Output's Unit

11.93125 Newton --> No Conversion Required

FINAL ANSWER

11.93125 Newton <-- Force at Point 1

(Calculation completed in 00.021 seconds)

You are here -

Home » Engineering » Chemical Engineering » Fluid Dynamics » Pressure and its Measurement » Force at Point 1 using Pascal's Law

Credits

Created by Ayush gupta

University School of Chemical Technology-USCT (GGSIPU), New Delhi

Ayush gupta has created this Calculator and 300+ more calculators!

Verified by Prerana Bakli

University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA

Prerana Bakli has verified this Calculator and 1600+ more calculators!

< Pressure and its Measurement Calculators

Force at Point 1 using Pascal's Law

LaTeX Go Force at Point 1 = Force at Point 2*(Area at Point 1/Area at Point 2)

Force at Point 2 using Pascal's Law

LaTeX Go Force at Point 2 = Force at Point 1*(Area at Point 2/Area at Point 1)

Area at Point 1 using Pascal's Law

LaTeX Go Area at Point 1 = Area at Point 2*(Force at Point 1/Force at Point 2)

Area at Point 2 using Pascal's Law

LaTeX Go Area at Point 2 = Area at Point 1*(Force at Point 2/Force at Point 1)

Force at Point 1 using Pascal's Law Formula

LaTeX Go

Force at Point 1 = Force at Point 2*(Area at Point 1/Area at Point 2)
F₁ = F₂*(A₁/A₂)

What is Fluid Mechanics?

Fluid dynamics is “the branch of applied science that is concerned with the movement of liquids and gases”. It involves a wide range of applications such as calculating force & moments, determining the mass flow rate of petroleum through pipelines, predicting weather patterns, understanding nebulae in interstellar space, and modelling fission weapon detonation.

What is Pascal’s Law?

The external static pressure applied on a confined liquid is distributed or transmitted evenly throughout the liquid in all directions. The static pressure acts at right angles to any surface in contact with the fluid. Pascal also found that the pressure at a point for a static fluid would be the same across all planes passing through that point in that fluid. Pascal’s law is also known as Pascal’s principle or principle of transmission of fluid-pressure. In 1653, Pascal law was stated by French mathematician Blaise Pascal.

How to Calculate Force at Point 1 using Pascal's Law?

Force at Point 1 using Pascal's Law calculator uses Force at Point 1 = Force at Point 2*(Area at Point 1/Area at Point 2) to calculate the Force at Point 1, The Force at Point 1 using Pascal's Law formula is defined as the function of force at point 2 and area of cross section of both points. A consequence of the pressure in a fluid remaining constant in the horizontal direction is that the pressure applied to a confined fluid increases the pressure throughout by the same amount. This is called Pascal’s law, after Blaise Pascal (1623–1662). Pascal also knew that the force applied by a fluid is proportional to the surface area. He realized that two hydraulic cylinders of different areas could be connected, and the larger could be used to exert a proportionally greater force than that applied to the smaller. “Pascal’s machine” has been the source of many inventions that are a part of our daily lives such as hydraulic brakes and lifts. This is what enables us to lift a car easily by one arm. Force at Point 1 is denoted by F₁ symbol.

How to calculate Force at Point 1 using Pascal's Law using this online calculator? To use this online calculator for Force at Point 1 using Pascal's Law, enter Force at Point 2 (F₂), Area at Point 1 (A₁) & Area at Point 2 (A₂) and hit the calculate button. Here is how the Force at Point 1 using Pascal's Law calculation can be explained with given input values -> 11.93125 = 12.45*(23/24).

FAQ

What is Force at Point 1 using Pascal's Law?

The Force at Point 1 using Pascal's Law formula is defined as the function of force at point 2 and area of cross section of both points. A consequence of the pressure in a fluid remaining constant in the horizontal direction is that the pressure applied to a confined fluid increases the pressure throughout by the same amount. This is called Pascal’s law, after Blaise Pascal (1623–1662). Pascal also knew that the force applied by a fluid is proportional to the surface area. He realized that two hydraulic cylinders of different areas could be connected, and the larger could be used to exert a proportionally greater force than that applied to the smaller. “Pascal’s machine” has been the source of many inventions that are a part of our daily lives such as hydraulic brakes and lifts. This is what enables us to lift a car easily by one arm and is represented as F₁ = F₂*(A₁/A₂) or Force at Point 1 = Force at Point 2*(Area at Point 1/Area at Point 2). Force at Point 2 is defined as the push or pull on an object with mass causes it to change its velocity at point 2, Area at Point 1 is defined as the cross sectional area at point 1 & Area at Point 2 is defined as the cross sectional area at point 2.

How to calculate Force at Point 1 using Pascal's Law?

The Force at Point 1 using Pascal's Law formula is defined as the function of force at point 2 and area of cross section of both points. A consequence of the pressure in a fluid remaining constant in the horizontal direction is that the pressure applied to a confined fluid increases the pressure throughout by the same amount. This is called Pascal’s law, after Blaise Pascal (1623–1662). Pascal also knew that the force applied by a fluid is proportional to the surface area. He realized that two hydraulic cylinders of different areas could be connected, and the larger could be used to exert a proportionally greater force than that applied to the smaller. “Pascal’s machine” has been the source of many inventions that are a part of our daily lives such as hydraulic brakes and lifts. This is what enables us to lift a car easily by one arm is calculated using Force at Point 1 = Force at Point 2*(Area at Point 1/Area at Point 2). To calculate Force at Point 1 using Pascal's Law, you need Force at Point 2 (F₂), Area at Point 1 (A₁) & Area at Point 2 (A₂). With our tool, you need to enter the respective value for Force at Point 2, Area at Point 1 & Area at Point 2 and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search