Force Applied by Coil Spring Calculator

✖Coil Spring Stiffness is the tightness of the spring's coils.ⓘ Coil Spring Stiffness [k]			+10% -10%
✖Maximum compression in spring of coil type is the resistance to a force tending to compress the spring.ⓘ Maximum Compression in Spring [x]			+10% -10%

✖Force Coil spring is the amount of constant force it takes a coil compression spring to compress down to a loaded height.ⓘ Force Applied by Coil Spring [F_coil]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Suspension Geometry Formulas PDF PDF Image

Force Applied by Coil Spring Solution

STEP 0: Pre-Calculation Summary

Formula Used

Force Coil Spring = Coil Spring Stiffness*Maximum Compression in Spring
F_coil = k*x
This formula uses 3 Variables

Variables Used

Force Coil Spring - (Measured in Newton) - Force Coil spring is the amount of constant force it takes a coil compression spring to compress down to a loaded height.
Coil Spring Stiffness - (Measured in Newton per Meter) - Coil Spring Stiffness is the tightness of the spring's coils.
Maximum Compression in Spring - (Measured in Meter) - Maximum compression in spring of coil type is the resistance to a force tending to compress the spring.

STEP 1: Convert Input(s) to Base Unit

Coil Spring Stiffness: 100 Newton per Meter --> 100 Newton per Meter No Conversion Required
Maximum Compression in Spring: 150 Millimeter --> 0.15 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

F_coil = k*x --> 100*0.15

Evaluating ... ...

F_coil = 15

STEP 3: Convert Result to Output's Unit

15 Newton --> No Conversion Required

FINAL ANSWER

15 Newton <-- Force Coil Spring

(Calculation completed in 00.006 seconds)

You are here -

Home » Physics » Automobile » Suspension Geometry » Mechanical » Forces on Suspension » Force Applied by Coil Spring

Credits

Created by Kartikay Pandit

National Institute Of Technology (NIT), Hamirpur

Kartikay Pandit has created this Calculator and 10+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Forces on Suspension Calculators

Mass on front axle given position of COG

LaTeX Go Mass on Front Axle = Horizontal Distance of C.G. from Rear Axle/(Wheelbase of Vehicle/Mass of Vehicle)

Force Applied by Coil Spring

LaTeX Go Force Coil Spring = Coil Spring Stiffness*Maximum Compression in Spring

Installation Ratio given Motion Ratio

LaTeX Go Installation Ratio = sqrt(Motion Ratio in Suspension)

Motion Ratio given Installation Ratio

LaTeX Go Motion Ratio in Suspension = Installation Ratio^2

Force Applied by Coil Spring Formula

LaTeX Go

Force Coil Spring = Coil Spring Stiffness*Maximum Compression in Spring
F_coil = k*x

What is Spring Rate?

The spring constant or spring rate “R” depends on the material and the design of the spring. With increasing thickness or a tighter winding of the wire used, the spring constant of a helical spring increases.

How to Calculate Force Applied by Coil Spring?

Force Applied by Coil Spring calculator uses Force Coil Spring = Coil Spring Stiffness*Maximum Compression in Spring to calculate the Force Coil Spring, The Force Applied by Coil Spring formula is defined as the amount of constant force it takes a coil compression spring to compress down to a loaded height is calculated by multiplying the force by the distance the coil compression spring is expected to travel. Force Coil Spring is denoted by F_coil symbol.

How to calculate Force Applied by Coil Spring using this online calculator? To use this online calculator for Force Applied by Coil Spring, enter Coil Spring Stiffness (k) & Maximum Compression in Spring (x) and hit the calculate button. Here is how the Force Applied by Coil Spring calculation can be explained with given input values -> 15 = 100*0.15.

FAQ

What is Force Applied by Coil Spring?

The Force Applied by Coil Spring formula is defined as the amount of constant force it takes a coil compression spring to compress down to a loaded height is calculated by multiplying the force by the distance the coil compression spring is expected to travel and is represented as F_coil = k*x or Force Coil Spring = Coil Spring Stiffness*Maximum Compression in Spring. Coil Spring Stiffness is the tightness of the spring's coils & Maximum compression in spring of coil type is the resistance to a force tending to compress the spring.

How to calculate Force Applied by Coil Spring?

The Force Applied by Coil Spring formula is defined as the amount of constant force it takes a coil compression spring to compress down to a loaded height is calculated by multiplying the force by the distance the coil compression spring is expected to travel is calculated using Force Coil Spring = Coil Spring Stiffness*Maximum Compression in Spring. To calculate Force Applied by Coil Spring, you need Coil Spring Stiffness (k) & Maximum Compression in Spring (x). With our tool, you need to enter the respective value for Coil Spring Stiffness & Maximum Compression in Spring and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search