Force Acting on Hydraulic Plunger Calculator

✖Weight Lifted by Plunger is defined as the amount of load that is lifted by the plunger when a certain amount of force is acting on it.ⓘ Weight Lifted by Plunger [W_p]			+10% -10%
✖Area of Plunger of Hydraulic Press is the cross-sectional area of the plunger or the piston of an hydraulic press.ⓘ Area of Plunger of Hydraulic Press [a]			+10% -10%
✖Area of hydraulic ram is defined as the area covered by the ram in which a piston or plunger is displaced by the pressure of a fluid.ⓘ Area of Hydraulic Ram [A]			+10% -10%

✖Force on Hydraulic Press Plunger is the amount of force that is exerted onto the plunger of an hydraulic press.ⓘ Force Acting on Hydraulic Plunger [F]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Fluid Mechanics Formula PDF PDF Image

Force Acting on Hydraulic Plunger Solution

STEP 0: Pre-Calculation Summary

Formula Used

Force on Hydraulic Press Plunger = Weight Lifted by Plunger*Area of Plunger of Hydraulic Press/Area of Hydraulic Ram
F = W_p*a/A
This formula uses 4 Variables

Variables Used

Force on Hydraulic Press Plunger - (Measured in Newton) - Force on Hydraulic Press Plunger is the amount of force that is exerted onto the plunger of an hydraulic press.
Weight Lifted by Plunger - (Measured in Newton) - Weight Lifted by Plunger is defined as the amount of load that is lifted by the plunger when a certain amount of force is acting on it.
Area of Plunger of Hydraulic Press - (Measured in Square Meter) - Area of Plunger of Hydraulic Press is the cross-sectional area of the plunger or the piston of an hydraulic press.
Area of Hydraulic Ram - (Measured in Square Meter) - Area of hydraulic ram is defined as the area covered by the ram in which a piston or plunger is displaced by the pressure of a fluid.

STEP 1: Convert Input(s) to Base Unit

Weight Lifted by Plunger: 1450 Newton --> 1450 Newton No Conversion Required
Area of Plunger of Hydraulic Press: 0.000346 Square Meter --> 0.000346 Square Meter No Conversion Required
Area of Hydraulic Ram: 0.0154 Square Meter --> 0.0154 Square Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

F = W_p*a/A --> 1450*0.000346/0.0154

Evaluating ... ...

F = 32.5779220779221

STEP 3: Convert Result to Output's Unit

32.5779220779221 Newton --> No Conversion Required

FINAL ANSWER

32.5779220779221 ≈ 32.57792 Newton <-- Force on Hydraulic Press Plunger

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » Fluid Mechanics » Fluid Machinery » Hydraulic Machines » Mechanical » Hydraulic Press » Force Acting on Hydraulic Plunger

Credits

Created by Shareef Alex

velagapudi ramakrishna siddhartha engineering college (vr siddhartha engineering college), vijayawada

Shareef Alex has created this Calculator and 100+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Hydraulic Press Calculators

Weight Lifted by Hydraulic Press

LaTeX Go Weight Lifted by Plunger = (Force on Hydraulic Press Plunger*Area of Hydraulic Ram)/Area of Plunger of Hydraulic Press

Force Acting on Hydraulic Plunger

LaTeX Go Force on Hydraulic Press Plunger = Weight Lifted by Plunger*Area of Plunger of Hydraulic Press/Area of Hydraulic Ram

Mechanical Advantage of Hydraulic Press given Weight and Force

LaTeX Go Mechanical Advantage of Hydraulic Press = Weight Lifted by Plunger/Force on Hydraulic Press Plunger

Mechanical Advantage of Hydraulic Press

LaTeX Go Mechanical Advantage of Hydraulic Press = Area of Hydraulic Ram/Area of Plunger of Hydraulic Press

Force Acting on Hydraulic Plunger Formula

LaTeX Go

Force on Hydraulic Press Plunger = Weight Lifted by Plunger*Area of Plunger of Hydraulic Press/Area of Hydraulic Ram
F = W_p*a/A

What is the force of a hydraulic press?

In case the pressure gauge reads 1000 PSI, the 1000 pounds per square inch is applied to 10 square inches. If every square inch of the surface area applies 1000 pounds of force, the 10 square inches will exert a total of 10,000 pounds of force.

What is hydraulic force?

Hydraulic pressure is measured as a force per unit of area e.g. Bar (kg/cm2) or PSI (Pounds per square inch). The hydraulic pressure at any point within the fluid is the same in all directions provided of course that the fluid is static.

How to Calculate Force Acting on Hydraulic Plunger?

Force Acting on Hydraulic Plunger calculator uses Force on Hydraulic Press Plunger = Weight Lifted by Plunger*Area of Plunger of Hydraulic Press/Area of Hydraulic Ram to calculate the Force on Hydraulic Press Plunger, Force Acting on Hydraulic Plunger formula is defined as the measure of the force exerted by the hydraulic fluid on the plunger, which is responsible for transmitting the force to the output shaft, ultimately resulting in the mechanical work done by the hydraulic machine. Force on Hydraulic Press Plunger is denoted by F symbol.

How to calculate Force Acting on Hydraulic Plunger using this online calculator? To use this online calculator for Force Acting on Hydraulic Plunger, enter Weight Lifted by Plunger (W_p), Area of Plunger of Hydraulic Press (a) & Area of Hydraulic Ram (A) and hit the calculate button. Here is how the Force Acting on Hydraulic Plunger calculation can be explained with given input values -> 32.57792 = 1450*0.000346/0.0154.

FAQ

What is Force Acting on Hydraulic Plunger?

Force Acting on Hydraulic Plunger formula is defined as the measure of the force exerted by the hydraulic fluid on the plunger, which is responsible for transmitting the force to the output shaft, ultimately resulting in the mechanical work done by the hydraulic machine and is represented as F = W_p*a/A or Force on Hydraulic Press Plunger = Weight Lifted by Plunger*Area of Plunger of Hydraulic Press/Area of Hydraulic Ram. Weight Lifted by Plunger is defined as the amount of load that is lifted by the plunger when a certain amount of force is acting on it, Area of Plunger of Hydraulic Press is the cross-sectional area of the plunger or the piston of an hydraulic press & Area of hydraulic ram is defined as the area covered by the ram in which a piston or plunger is displaced by the pressure of a fluid.

How to calculate Force Acting on Hydraulic Plunger?

Force Acting on Hydraulic Plunger formula is defined as the measure of the force exerted by the hydraulic fluid on the plunger, which is responsible for transmitting the force to the output shaft, ultimately resulting in the mechanical work done by the hydraulic machine is calculated using Force on Hydraulic Press Plunger = Weight Lifted by Plunger*Area of Plunger of Hydraulic Press/Area of Hydraulic Ram. To calculate Force Acting on Hydraulic Plunger, you need Weight Lifted by Plunger (W_p), Area of Plunger of Hydraulic Press (a) & Area of Hydraulic Ram (A). With our tool, you need to enter the respective value for Weight Lifted by Plunger, Area of Plunger of Hydraulic Press & Area of Hydraulic Ram and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search