Force Acting on Engine Push Rod Made of Steel Calculator

✖Stress in Push Rod is defined as the force per unit area within the push rod material that arises due to the externally applied forces onto it.ⓘ Stress in Push Rod [σ_c]			+10% -10%
✖Cross Sectional Area of Push Rod is the area of the section of the pushrod when it is along perpendicular to its length.ⓘ Cross Sectional Area of Push Rod [A_r]			+10% -10%
✖Length of Push Rod is the size of the push rod from one end to another end (how long the rod is).ⓘ Length of Push Rod [l]			+10% -10%
✖Radius of Gyration of Push Rod is defined as the radial distance to a point that would have a moment of inertia the same as the rod's actual distribution of mass.ⓘ Radius of Gyration of Push Rod [k_G]			+10% -10%

✖Force on Push Rod is defined as the force (a push or pull on the pushrod resulting from its interaction with another part) that is acting onto the pushrod.ⓘ Force Acting on Engine Push Rod Made of Steel [P]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Design of IC Engine Components Formula PDF PDF Image

Force Acting on Engine Push Rod Made of Steel Solution

STEP 0: Pre-Calculation Summary

Formula Used

Force on Push Rod = (Stress in Push Rod*Cross Sectional Area of Push Rod)/(1+1/7500*(Length of Push Rod/Radius of Gyration of Push Rod)^2)
P = (σ_c*A_r)/(1+1/7500*(l/k_G)^2)
This formula uses 5 Variables

Variables Used

Force on Push Rod - (Measured in Newton) - Force on Push Rod is defined as the force (a push or pull on the pushrod resulting from its interaction with another part) that is acting onto the pushrod.
Stress in Push Rod - (Measured in Pascal) - Stress in Push Rod is defined as the force per unit area within the push rod material that arises due to the externally applied forces onto it.
Cross Sectional Area of Push Rod - (Measured in Square Meter) - Cross Sectional Area of Push Rod is the area of the section of the pushrod when it is along perpendicular to its length.
Length of Push Rod - (Measured in Meter) - Length of Push Rod is the size of the push rod from one end to another end (how long the rod is).
Radius of Gyration of Push Rod - (Measured in Meter) - Radius of Gyration of Push Rod is defined as the radial distance to a point that would have a moment of inertia the same as the rod's actual distribution of mass.

STEP 1: Convert Input(s) to Base Unit

Stress in Push Rod: 12.5 Newton per Square Millimeter --> 12500000 Pascal (Check conversion here)
Cross Sectional Area of Push Rod: 40 Square Millimeter --> 4E-05 Square Meter (Check conversion here)
Length of Push Rod: 86.7 Millimeter --> 0.0867 Meter (Check conversion here)
Radius of Gyration of Push Rod: 3 Millimeter --> 0.003 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P = (σ_c*A_r)/(1+1/7500*(l/k_G)^2) --> (12500000*4E-05)/(1+1/7500*(0.0867/0.003)^2)

Evaluating ... ...

P = 449.89868281663

STEP 3: Convert Result to Output's Unit

449.89868281663 Newton --> No Conversion Required

FINAL ANSWER

449.89868281663 ≈ 449.8987 Newton <-- Force on Push Rod

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » IC Engine » Design of IC Engine Components » Mechanical » Push Rod » Force Acting on Engine Push Rod Made of Steel

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Push Rod Calculators

Minimum Inner Diameter of Engine Push Rod given Outer Diameter

LaTeX Go Inner Diameter of Push Rod = 0.6*Outer Diameter of Push Rod

Maximum Inner Diameter of Engine Push Rod given Outer Diameter

LaTeX Go Inner Diameter of Push Rod = 0.8*Outer Diameter of Push Rod

Maximum Outer Diameter of Engine Push Rod given Inner Diameter

LaTeX Go Outer Diameter of Push Rod = Inner Diameter of Push Rod/0.6

Minimum Outer Diameter of Engine Push Rod given Inner Diameter

LaTeX Go Outer Diameter of Push Rod = Inner Diameter of Push Rod/0.8

Force Acting on Engine Push Rod Made of Steel Formula

LaTeX Go

Force on Push Rod = (Stress in Push Rod*Cross Sectional Area of Push Rod)/(1+1/7500*(Length of Push Rod/Radius of Gyration of Push Rod)^2)
P = (σ_c*A_r)/(1+1/7500*(l/k_G)^2)

Symptoms of Pushrod failure

If the intake valve's pushrod is bent, the valve will come into contact with the piston. If a valve has been opened up because of a loose lock nut or if it has been adjusted with an incorrect clearance. It can make the valve bend.

How to Calculate Force Acting on Engine Push Rod Made of Steel?

Force Acting on Engine Push Rod Made of Steel calculator uses Force on Push Rod = (Stress in Push Rod*Cross Sectional Area of Push Rod)/(1+1/7500*(Length of Push Rod/Radius of Gyration of Push Rod)^2) to calculate the Force on Push Rod, Force acting on engine push rod made of steel is the amount of force acting onto the end of a pushrod which is fitted with a lifter, upon which the camshaft makes contact. The camshaft lobe moves the lifter upwards, which moves the pushrod. Force on Push Rod is denoted by P symbol.

How to calculate Force Acting on Engine Push Rod Made of Steel using this online calculator? To use this online calculator for Force Acting on Engine Push Rod Made of Steel, enter Stress in Push Rod (σ_c), Cross Sectional Area of Push Rod (A_r), Length of Push Rod (l) & Radius of Gyration of Push Rod (k_G) and hit the calculate button. Here is how the Force Acting on Engine Push Rod Made of Steel calculation can be explained with given input values -> 446.3116 = (12500000*4E-05)/(1+1/7500*(0.0867/0.003)^2).

FAQ

What is Force Acting on Engine Push Rod Made of Steel?

Force acting on engine push rod made of steel is the amount of force acting onto the end of a pushrod which is fitted with a lifter, upon which the camshaft makes contact. The camshaft lobe moves the lifter upwards, which moves the pushrod and is represented as P = (σ_c*A_r)/(1+1/7500*(l/k_G)^2) or Force on Push Rod = (Stress in Push Rod*Cross Sectional Area of Push Rod)/(1+1/7500*(Length of Push Rod/Radius of Gyration of Push Rod)^2). Stress in Push Rod is defined as the force per unit area within the push rod material that arises due to the externally applied forces onto it, Cross Sectional Area of Push Rod is the area of the section of the pushrod when it is along perpendicular to its length, Length of Push Rod is the size of the push rod from one end to another end (how long the rod is) & Radius of Gyration of Push Rod is defined as the radial distance to a point that would have a moment of inertia the same as the rod's actual distribution of mass.

How to calculate Force Acting on Engine Push Rod Made of Steel?

Force acting on engine push rod made of steel is the amount of force acting onto the end of a pushrod which is fitted with a lifter, upon which the camshaft makes contact. The camshaft lobe moves the lifter upwards, which moves the pushrod is calculated using Force on Push Rod = (Stress in Push Rod*Cross Sectional Area of Push Rod)/(1+1/7500*(Length of Push Rod/Radius of Gyration of Push Rod)^2). To calculate Force Acting on Engine Push Rod Made of Steel, you need Stress in Push Rod (σ_c), Cross Sectional Area of Push Rod (A_r), Length of Push Rod (l) & Radius of Gyration of Push Rod (k_G). With our tool, you need to enter the respective value for Stress in Push Rod, Cross Sectional Area of Push Rod, Length of Push Rod & Radius of Gyration of Push Rod and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Force on Push Rod?

In this formula, Force on Push Rod uses Stress in Push Rod, Cross Sectional Area of Push Rod, Length of Push Rod & Radius of Gyration of Push Rod. We can use 2 other way(s) to calculate the same, which is/are as follows -

Force on Push Rod = (Stress in Push Rod*pi/4*(Outer Diameter of Push Rod^2-Inner Diameter of Push Rod^2))/(1+Constant used in Buckling Load Formula*((Length of Push Rod^2)/((Outer Diameter of Push Rod^2+Inner Diameter of Push Rod^2)/16)))
Force on Push Rod = (Stress in Push Rod*Cross Sectional Area of Push Rod)/(1+Constant used in Buckling Load Formula*(Length of Push Rod/Radius of Gyration of Push Rod)^2)

Home

FREE PDFs

🔍 Search