Field Density of Soil given Dry Density of Soil in Sand Cone Method Calculator

✖Dry Density is a measure of the mass of solids per unit volume of soil, excluding the pore spaces filled with water or air. It is expressed in terms of mass per unit volume.ⓘ Dry Density [ρ_d]			+10% -10%
✖Percent Moisture is the amount of water present in a soil sample, usually expressed as a percentage of the soil's dry weight.ⓘ Percent Moisture [M]			+10% -10%

✖Bulk Density of Soil is the mass of soil per unit volume. It includes both the soil particles and the pore spaces between them.ⓘ Field Density of Soil given Dry Density of Soil in Sand Cone Method [γ_t]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Compaction of Soil Formulas PDF PDF Image

Field Density of Soil given Dry Density of Soil in Sand Cone Method Solution

STEP 0: Pre-Calculation Summary

Formula Used

Bulk Density of Soil = (Dry Density*(1+(Percent Moisture/100)))
γ_t = (ρ_d*(1+(M/100)))
This formula uses 3 Variables

Variables Used

Bulk Density of Soil - (Measured in Kilogram per Cubic Meter) - Bulk Density of Soil is the mass of soil per unit volume. It includes both the soil particles and the pore spaces between them.
Dry Density - (Measured in Kilogram per Cubic Meter) - Dry Density is a measure of the mass of solids per unit volume of soil, excluding the pore spaces filled with water or air. It is expressed in terms of mass per unit volume.
Percent Moisture - Percent Moisture is the amount of water present in a soil sample, usually expressed as a percentage of the soil's dry weight.

STEP 1: Convert Input(s) to Base Unit

Dry Density: 10 Kilogram per Cubic Meter --> 10 Kilogram per Cubic Meter No Conversion Required
Percent Moisture: 0.037 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

γ_t = (ρ_d*(1+(M/100))) --> (10*(1+(0.037/100)))

Evaluating ... ...

γ_t = 10.0037

STEP 3: Convert Result to Output's Unit

10.0037 Kilogram per Cubic Meter --> No Conversion Required

FINAL ANSWER

10.0037 Kilogram per Cubic Meter <-- Bulk Density of Soil

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Compaction of Soil » Soil Compaction Test » Field Density of Soil given Dry Density of Soil in Sand Cone Method

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Soil Compaction Test Calculators

Percent Moisture in Sand Cone Method

LaTeX Go Percent Moisture from Sand Cone Test = (100*(Weight of Moist Soil-Weight of Dry Soil))/Weight of Dry Soil

Density of Sand given Volume of Soil for Sand Filling in Sand Cone Method

LaTeX Go Density of Sand = (Weight of Total Soil/Volume of Soil)

Volume of Soil for Sand Filling in Sand Cone Method

LaTeX Go Volume of Soil = (Weight of Total Soil/Density of Sand)

Weight of Sand Filling Hole in Sand Cone Method

LaTeX Go Weight of Total Soil = (Volume of Soil*Density of Sand)

Field Density of Soil given Dry Density of Soil in Sand Cone Method Formula

LaTeX Go

Bulk Density of Soil = (Dry Density*(1+(Percent Moisture/100)))
γ_t = (ρ_d*(1+(M/100)))

What is Dry Density of Soil?

Dry density is calculated by dividing the weight of the wet soil by its water content in percent. The percent compaction for the field density test is calculated by dividing the dry density of the soil by the maximum dry density from the proctor test.

How to Calculate Field Density of Soil given Dry Density of Soil in Sand Cone Method?

Field Density of Soil given Dry Density of Soil in Sand Cone Method calculator uses Bulk Density of Soil = (Dry Density*(1+(Percent Moisture/100))) to calculate the Bulk Density of Soil, The Field Density of Soil given Dry Density of Soil in Sand Cone Method formula is defined as the in-situ density of natural or compacted soils. The test involves using a calibrated cone apparatus and sand to measure the volume of a hole dug in the soil. The weight of the sand that fills the hole is then used to calculate the density of the soil in place. Bulk Density of Soil is denoted by γ_t symbol.

How to calculate Field Density of Soil given Dry Density of Soil in Sand Cone Method using this online calculator? To use this online calculator for Field Density of Soil given Dry Density of Soil in Sand Cone Method, enter Dry Density (ρ_d) & Percent Moisture (M) and hit the calculate button. Here is how the Field Density of Soil given Dry Density of Soil in Sand Cone Method calculation can be explained with given input values -> 10.0037 = (10*(1+(0.037/100))).

FAQ

What is Field Density of Soil given Dry Density of Soil in Sand Cone Method?

The Field Density of Soil given Dry Density of Soil in Sand Cone Method formula is defined as the in-situ density of natural or compacted soils. The test involves using a calibrated cone apparatus and sand to measure the volume of a hole dug in the soil. The weight of the sand that fills the hole is then used to calculate the density of the soil in place and is represented as γ_t = (ρ_d*(1+(M/100))) or Bulk Density of Soil = (Dry Density*(1+(Percent Moisture/100))). Dry Density is a measure of the mass of solids per unit volume of soil, excluding the pore spaces filled with water or air. It is expressed in terms of mass per unit volume & Percent Moisture is the amount of water present in a soil sample, usually expressed as a percentage of the soil's dry weight.

How to calculate Field Density of Soil given Dry Density of Soil in Sand Cone Method?

The Field Density of Soil given Dry Density of Soil in Sand Cone Method formula is defined as the in-situ density of natural or compacted soils. The test involves using a calibrated cone apparatus and sand to measure the volume of a hole dug in the soil. The weight of the sand that fills the hole is then used to calculate the density of the soil in place is calculated using Bulk Density of Soil = (Dry Density*(1+(Percent Moisture/100))). To calculate Field Density of Soil given Dry Density of Soil in Sand Cone Method, you need Dry Density (ρ_d) & Percent Moisture (M). With our tool, you need to enter the respective value for Dry Density & Percent Moisture and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search