Field Capacity of Water Solution

STEP 0: Pre-Calculation Summary
Formula Used
The Field Capacity of Water = (Unit Weight of Water*Depth of Root Zone in Meters)/The Dry Unit Weight of Soil
F = (Γw*dw)/Γd
This formula uses 4 Variables
Variables Used
The Field Capacity of Water - The field capacity of water remaining in a soil after it has been thoroughly saturated and allowed to drain freely, usually for one to two days.
Unit Weight of Water - (Measured in Newton per Cubic Meter) - Unit Weight of Water is a volume-specific quantity defined as the weight per unit volume of a material.
Depth of Root Zone in Meters - (Measured in Meter) - Depth of root zone in meters is the depth within the soil profile that commodity crop (cc) roots can effectively extract water and nutrients for growth.
The Dry Unit Weight of Soil - (Measured in Newton per Cubic Meter) - The Dry unit weight of soil when the dry weight is reckoned with reference to the total original volume V, it is called the dry unit weight.
STEP 1: Convert Input(s) to Base Unit
Unit Weight of Water: 9.807 Kilonewton per Cubic Meter --> 9807 Newton per Cubic Meter (Check conversion ​here)
Depth of Root Zone in Meters: 0.3 Meter --> 0.3 Meter No Conversion Required
The Dry Unit Weight of Soil: 13.73 Kilonewton per Cubic Meter --> 13730 Newton per Cubic Meter (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
F = (Γw*dw)/Γd --> (9807*0.3)/13730
Evaluating ... ...
F = 0.214282592862345
STEP 3: Convert Result to Output's Unit
0.214282592862345 --> No Conversion Required
FINAL ANSWER
0.214282592862345 0.214283 <-- The Field Capacity of Water
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by bhuvaneshwari
Coorg institute of technology (CIT), Kodagu
bhuvaneshwari has created this Calculator and 50+ more calculators!
Verifier Image
Verified by Ayush Singh
Gautam Buddha University (GBU), Greater Noida
Ayush Singh has verified this Calculator and 100+ more calculators!

Depth of Water Held by Soil in Root Zone Calculators

Total Water Storage Capacity of Soil
​ LaTeX ​ Go Total Water Storage Capacity of Soil = (The Dry Unit Weight of Soil)*(Root Zone Depth)*(The Field Capacity of Water)/Unit Weight of Water
Depth of Water Stored in Root Zone in Filling Soil up to Field Capacity
​ LaTeX ​ Go Depth of Root Zone in Meters = (The Dry Unit Weight of Soil)*(Root Zone Depth)*(The Field Capacity of Water)/Unit Weight of Water
Weight of Water Retained in Unit Area of Soil
​ LaTeX ​ Go Unit Weight of Water = (The Dry Unit Weight of Soil)*(Depth of Root Zone in Meters)*(The Field Capacity of Water)
Field Capacity of Water
​ LaTeX ​ Go The Field Capacity of Water = (Unit Weight of Water*Depth of Root Zone in Meters)/The Dry Unit Weight of Soil

Field Capacity of Water Formula

​LaTeX ​Go
The Field Capacity of Water = (Unit Weight of Water*Depth of Root Zone in Meters)/The Dry Unit Weight of Soil
F = (Γw*dw)/Γd

What is Field Capacity?

Field capacity is the amount of soil moisture or water content held in the soil after excess water has drained away and the rate of downward movement has decreased. This usually takes place 2–3 days after rain or irrigation in pervious soils of uniform structure and texture. The physical definition of field capacity (expressed symbolically as θfc) is the bulk water content retained in soil at −33 kPa (or −0.33 bar) of hydraulic head or suction pressure. The term originated from Israelsen and West[1] and Frank Veihmeyer and Arthur Hendrickson.[2]

What are the Physical Properties of Soil?

Physical properties of soil include color, texture, structure, porosity, density, consistence, aggregate stability, and temperature. These properties affect processes such as infiltration, erosion, nutrient cycling, and biologic activity.

How to Calculate Field Capacity of Water?

Field Capacity of Water calculator uses The Field Capacity of Water = (Unit Weight of Water*Depth of Root Zone in Meters)/The Dry Unit Weight of Soil to calculate the The Field Capacity of Water, The Field Capacity of Water formula is defined as the amount of soil moisture or water content held in the soil after excess water has drained away and the rate of downward movement has decreased. The Field Capacity of Water is denoted by F symbol.

How to calculate Field Capacity of Water using this online calculator? To use this online calculator for Field Capacity of Water, enter Unit Weight of Water w), Depth of Root Zone in Meters (dw) & The Dry Unit Weight of Soil d) and hit the calculate button. Here is how the Field Capacity of Water calculation can be explained with given input values -> 0.214283 = (9807*0.3)/13730.

FAQ

What is Field Capacity of Water?
The Field Capacity of Water formula is defined as the amount of soil moisture or water content held in the soil after excess water has drained away and the rate of downward movement has decreased and is represented as F = (Γw*dw)/Γd or The Field Capacity of Water = (Unit Weight of Water*Depth of Root Zone in Meters)/The Dry Unit Weight of Soil. Unit Weight of Water is a volume-specific quantity defined as the weight per unit volume of a material, Depth of root zone in meters is the depth within the soil profile that commodity crop (cc) roots can effectively extract water and nutrients for growth & The Dry unit weight of soil when the dry weight is reckoned with reference to the total original volume V, it is called the dry unit weight.
How to calculate Field Capacity of Water?
The Field Capacity of Water formula is defined as the amount of soil moisture or water content held in the soil after excess water has drained away and the rate of downward movement has decreased is calculated using The Field Capacity of Water = (Unit Weight of Water*Depth of Root Zone in Meters)/The Dry Unit Weight of Soil. To calculate Field Capacity of Water, you need Unit Weight of Water w), Depth of Root Zone in Meters (dw) & The Dry Unit Weight of Soil d). With our tool, you need to enter the respective value for Unit Weight of Water, Depth of Root Zone in Meters & The Dry Unit Weight of Soil and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!