Feed speed in Grinding Calculator

✖Machine Infeed Speed Towards Workpiece is the rate at which the wheel is moving towards the workpiece in grinding.ⓘ Machine Infeed Speed Towards Workpiece [V_i]			+10% -10%
✖The Diameter of Grinding Tool Wheel is the size of grinding wheel and a critical parameter in grinding operations. It determines the wheel's cutting speed, material removal rate, and surface finish.ⓘ The Diameter of Grinding Tool Wheel [d_T]			+10% -10%

✖The Feed Speed is the rate at which the cutting tool or workpiece moves during a machining operation. It is given against a workpiece per unit time.ⓘ Feed speed in Grinding [V_F]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Grinding Operation Formula PDF PDF Image

Feed speed in Grinding Solution

STEP 0: Pre-Calculation Summary

Formula Used

The Feed Speed = Machine Infeed Speed Towards Workpiece-(The Diameter of Grinding Tool Wheel/2)
V_F = V_i-(d_T/2)
This formula uses 3 Variables

Variables Used

The Feed Speed - (Measured in Meter per Second) - The Feed Speed is the rate at which the cutting tool or workpiece moves during a machining operation. It is given against a workpiece per unit time.
Machine Infeed Speed Towards Workpiece - (Measured in Meter per Second) - Machine Infeed Speed Towards Workpiece is the rate at which the wheel is moving towards the workpiece in grinding.
The Diameter of Grinding Tool Wheel - (Measured in Meter) - The Diameter of Grinding Tool Wheel is the size of grinding wheel and a critical parameter in grinding operations. It determines the wheel's cutting speed, material removal rate, and surface finish.

STEP 1: Convert Input(s) to Base Unit

Machine Infeed Speed Towards Workpiece: 9.5 Millimeter per Second --> 0.0095 Meter per Second (Check conversion here)
The Diameter of Grinding Tool Wheel: 12.01 Millimeter --> 0.01201 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V_F = V_i-(d_T/2) --> 0.0095-(0.01201/2)

Evaluating ... ...

V_F = 0.003495

STEP 3: Convert Result to Output's Unit

0.003495 Meter per Second -->3.495 Millimeter per Second (Check conversion here)

FINAL ANSWER

3.495 Millimeter per Second <-- The Feed Speed

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Machine Tools and Operations » Grinding Operation » Analysis of Grinding Process » Cylindrical Grinding cycle » Wheel » Feed speed in Grinding

Credits

Created by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has created this Calculator and 300+ more calculators!

Verified by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has verified this Calculator and 100+ more calculators!

< Wheel Calculators

Surface speed of wheel given number of chip produce per time

LaTeX Go Surface Speed of Wheel for Given No of Chips = Number of Chip Produced per Unit Time/(Width of Grinding Path*Number of Active Grains per Area)

Diameter of wheel for given Average Length of chip

LaTeX Go The Diameter of Grinding Tool Wheel = 2*Length of Chip/sin(Angle Made by the Length of Chip)

Diameter of wheel for given infeed

LaTeX Go The Diameter of Grinding Tool Wheel = 2*Feed/(1-cos(Angle Made by the Length of Chip))

Diameter of wheel given Average length of chip and Infeed

LaTeX Go The Diameter of Grinding Tool Wheel = (Length of Chip)^2/Feed

Feed speed in Grinding Formula

LaTeX Go

The Feed Speed = Machine Infeed Speed Towards Workpiece-(The Diameter of Grinding Tool Wheel/2)
V_F = V_i-(d_T/2)

What is meant by centerless grinding?

Centerless grinding describes a technique that holds the workpiece in the center between two grinding wheels, which rotate in the same direction (usually clockwise). The left side grinding wheel is held in position as it rotates.

How to Calculate Feed speed in Grinding?

Feed speed in Grinding calculator uses The Feed Speed = Machine Infeed Speed Towards Workpiece-(The Diameter of Grinding Tool Wheel/2) to calculate the The Feed Speed, The Feed speed in Grinding is the amount of Feed given against a workpiece per unit time in the Grinding. The Feed Speed is denoted by V_F symbol.

How to calculate Feed speed in Grinding using this online calculator? To use this online calculator for Feed speed in Grinding, enter Machine Infeed Speed Towards Workpiece (V_i) & The Diameter of Grinding Tool Wheel (d_T) and hit the calculate button. Here is how the Feed speed in Grinding calculation can be explained with given input values -> 3500 = 0.0095-(0.01201/2).

FAQ

What is Feed speed in Grinding?

The Feed speed in Grinding is the amount of Feed given against a workpiece per unit time in the Grinding and is represented as V_F = V_i-(d_T/2) or The Feed Speed = Machine Infeed Speed Towards Workpiece-(The Diameter of Grinding Tool Wheel/2). Machine Infeed Speed Towards Workpiece is the rate at which the wheel is moving towards the workpiece in grinding & The Diameter of Grinding Tool Wheel is the size of grinding wheel and a critical parameter in grinding operations. It determines the wheel's cutting speed, material removal rate, and surface finish.

How to calculate Feed speed in Grinding?

The Feed speed in Grinding is the amount of Feed given against a workpiece per unit time in the Grinding is calculated using The Feed Speed = Machine Infeed Speed Towards Workpiece-(The Diameter of Grinding Tool Wheel/2). To calculate Feed speed in Grinding, you need Machine Infeed Speed Towards Workpiece (V_i) & The Diameter of Grinding Tool Wheel (d_T). With our tool, you need to enter the respective value for Machine Infeed Speed Towards Workpiece & The Diameter of Grinding Tool Wheel and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search