Factor of Safety with respect to Shear Strength given Weighted Friction Angle Solution

STEP 0: Pre-Calculation Summary
Formula Used
Factor of Safety = (Submerged Unit Weight*Effective Angle of Internal Friction)/(Weighted Friction Angle for Internal Friction*Saturated Unit Weight)
fs = (γ'*φ')/(φIF*γsat)
This formula uses 5 Variables
Variables Used
Factor of Safety - Factor of Safety is a measure of the load-carrying capacity of a structure or material compared to the actual load or stress that is applied to it.
Submerged Unit Weight - (Measured in Newton per Cubic Meter) - Submerged Unit Weight is the effective weight of the soil per unit volume when it is submerged in water.
Effective Angle of Internal Friction - (Measured in Radian) - Effective Angle of Internal Friction is the shear strength of soil due to the friction between soil particles when subjected to effective stress.
Weighted Friction Angle for Internal Friction - (Measured in Radian) - Weighted Friction Angle for Internal Friction is an effective measure combining materials' friction properties and their relative contributions in geotechnical engineering for stability analysis.
Saturated Unit Weight - (Measured in Newton per Cubic Meter) - Saturated Unit Weight is the value of the unit weight of the soil when the soil is completely saturated with water that is all the soil pores are completely filled with water.
STEP 1: Convert Input(s) to Base Unit
Submerged Unit Weight: 31 Newton per Cubic Meter --> 31 Newton per Cubic Meter No Conversion Required
Effective Angle of Internal Friction: 9.99 Degree --> 0.174358392274201 Radian (Check conversion ​here)
Weighted Friction Angle for Internal Friction: 11 Degree --> 0.19198621771934 Radian (Check conversion ​here)
Saturated Unit Weight: 9.98 Newton per Cubic Meter --> 9.98 Newton per Cubic Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
fs = (γ'*φ')/(φIFsat) --> (31*0.174358392274201)/(0.19198621771934*9.98)
Evaluating ... ...
fs = 2.82100564765896
STEP 3: Convert Result to Output's Unit
2.82100564765896 --> No Conversion Required
FINAL ANSWER
2.82100564765896 2.821006 <-- Factor of Safety
(Calculation completed in 00.020 seconds)

Credits

Creator Image
Created by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has created this Calculator and 2100+ more calculators!
Verifier Image
Verified by Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has verified this Calculator and 2600+ more calculators!

Taylor's Stability Number and Stability Curves Calculators

Submerged Unit Weight given Factor of Safety with respect to Shear Strength
​ LaTeX ​ Go Submerged Unit Weight = tan((Weighted Friction Angle*pi)/180)/((1/Saturated Unit Weight)*(tan((Angle of Internal Friction of Soil*pi)/180)/Factor of Safety))
Saturated Unit Weight given Factor of Safety with respect to Shear Strength
​ LaTeX ​ Go Saturated Unit Weight = ((Submerged Unit Weight/tan((Weighted Friction Angle for Internal Friction)))*(tan((Angle of Internal Friction))/Factor of Safety))
Factor of Safety with respect to Shear Strength
​ LaTeX ​ Go Factor of Safety = ((Submerged Unit Weight/Saturated Unit Weight)*(tan((Angle of Internal Friction))/tan((Weighted Friction Angle for Internal Friction))))
Weighted Friction Angle given Factor of Safety with respect to Shear Strength
​ LaTeX ​ Go Weighted Friction Angle = atan((Submerged Unit Weight/Saturated Unit Weight)*(tan((Angle of Internal Friction of Soil))/Factor of Safety))

Factor of Safety with respect to Shear Strength given Weighted Friction Angle Formula

​LaTeX ​Go
Factor of Safety = (Submerged Unit Weight*Effective Angle of Internal Friction)/(Weighted Friction Angle for Internal Friction*Saturated Unit Weight)
fs = (γ'*φ')/(φIF*γsat)

What is Factor of Safety?

Factor of safety (FoS) is ability of a system's structural capacity to be viable beyond its expected or actual loads.For example, a safety factor of 2 does not mean that a structure can carry twice as much load as it was designed for. The safety factor depends on the materials and use of an item.

How to Calculate Factor of Safety with respect to Shear Strength given Weighted Friction Angle?

Factor of Safety with respect to Shear Strength given Weighted Friction Angle calculator uses Factor of Safety = (Submerged Unit Weight*Effective Angle of Internal Friction)/(Weighted Friction Angle for Internal Friction*Saturated Unit Weight) to calculate the Factor of Safety, The Factor of Safety with respect to Shear Strength given Weighted Friction Angle formula is defined as a ratio of the shear strength of a material (defined by the weighted friction angle) to the applied stresses, ensuring stability in geotechnical engineering, considering weighted friction angle. Factor of Safety is denoted by fs symbol.

How to calculate Factor of Safety with respect to Shear Strength given Weighted Friction Angle using this online calculator? To use this online calculator for Factor of Safety with respect to Shear Strength given Weighted Friction Angle, enter Submerged Unit Weight '), Effective Angle of Internal Friction (φ'), Weighted Friction Angle for Internal Friction IF) & Saturated Unit Weight sat) and hit the calculate button. Here is how the Factor of Safety with respect to Shear Strength given Weighted Friction Angle calculation can be explained with given input values -> 2.821006 = (31*0.174358392274201)/(0.19198621771934*9.98).

FAQ

What is Factor of Safety with respect to Shear Strength given Weighted Friction Angle?
The Factor of Safety with respect to Shear Strength given Weighted Friction Angle formula is defined as a ratio of the shear strength of a material (defined by the weighted friction angle) to the applied stresses, ensuring stability in geotechnical engineering, considering weighted friction angle and is represented as fs = (γ'*φ')/(φIFsat) or Factor of Safety = (Submerged Unit Weight*Effective Angle of Internal Friction)/(Weighted Friction Angle for Internal Friction*Saturated Unit Weight). Submerged Unit Weight is the effective weight of the soil per unit volume when it is submerged in water, Effective Angle of Internal Friction is the shear strength of soil due to the friction between soil particles when subjected to effective stress, Weighted Friction Angle for Internal Friction is an effective measure combining materials' friction properties and their relative contributions in geotechnical engineering for stability analysis & Saturated Unit Weight is the value of the unit weight of the soil when the soil is completely saturated with water that is all the soil pores are completely filled with water.
How to calculate Factor of Safety with respect to Shear Strength given Weighted Friction Angle?
The Factor of Safety with respect to Shear Strength given Weighted Friction Angle formula is defined as a ratio of the shear strength of a material (defined by the weighted friction angle) to the applied stresses, ensuring stability in geotechnical engineering, considering weighted friction angle is calculated using Factor of Safety = (Submerged Unit Weight*Effective Angle of Internal Friction)/(Weighted Friction Angle for Internal Friction*Saturated Unit Weight). To calculate Factor of Safety with respect to Shear Strength given Weighted Friction Angle, you need Submerged Unit Weight '), Effective Angle of Internal Friction (φ'), Weighted Friction Angle for Internal Friction IF) & Saturated Unit Weight sat). With our tool, you need to enter the respective value for Submerged Unit Weight, Effective Angle of Internal Friction, Weighted Friction Angle for Internal Friction & Saturated Unit Weight and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Factor of Safety?
In this formula, Factor of Safety uses Submerged Unit Weight, Effective Angle of Internal Friction, Weighted Friction Angle for Internal Friction & Saturated Unit Weight. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Factor of Safety = ((Submerged Unit Weight/Saturated Unit Weight)*(tan((Angle of Internal Friction))/tan((Weighted Friction Angle for Internal Friction))))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!