External Work Done by Gas in Adiabatic Process Introducing Pressure Calculator

✖Heat Capacity Ratio is the ratio of specific heats of a substance at constant pressure and constant volume.ⓘ Heat Capacity Ratio [C]			+10% -10%
✖Pressure 1 is the pressure at give point 1.ⓘ Pressure 1 [P₁]			+10% -10%
✖Specific Volume for Point 1 is the number of cubic meters occupied by one kilogram of matter. It is the ratio of a material's volume to its mass.ⓘ Specific Volume for Point 1 [v₁]			+10% -10%
✖Pressure 2 is the pressure at give point 2.ⓘ Pressure 2 [P₂]			+10% -10%
✖Specific Volume for Point 2 is the number of cubic meters occupied by one kilogram of matter. It is the ratio of a material's volume to its mass.ⓘ Specific Volume for Point 2 [v₂]			+10% -10%

✖Work Done refers to the amount of energy transferred or expended when a force acts on an object and causes displacement.ⓘ External Work Done by Gas in Adiabatic Process Introducing Pressure [w]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Basic Relationship of Thermodynamics Formulas PDF PDF Image

External Work Done by Gas in Adiabatic Process Introducing Pressure Solution

STEP 0: Pre-Calculation Summary

Formula Used

Work Done = (1/(Heat Capacity Ratio-1))*(Pressure 1*Specific Volume for Point 1-Pressure 2*Specific Volume for Point 2)
w = (1/(C-1))*(P₁*v₁-P₂*v₂)
This formula uses 6 Variables

Variables Used

Work Done - (Measured in Joule) - Work Done refers to the amount of energy transferred or expended when a force acts on an object and causes displacement.
Heat Capacity Ratio - Heat Capacity Ratio is the ratio of specific heats of a substance at constant pressure and constant volume.
Pressure 1 - (Measured in Pascal) - Pressure 1 is the pressure at give point 1.
Specific Volume for Point 1 - (Measured in Cubic Meter per Kilogram) - Specific Volume for Point 1 is the number of cubic meters occupied by one kilogram of matter. It is the ratio of a material's volume to its mass.
Pressure 2 - (Measured in Pascal) - Pressure 2 is the pressure at give point 2.
Specific Volume for Point 2 - (Measured in Cubic Meter per Kilogram) - Specific Volume for Point 2 is the number of cubic meters occupied by one kilogram of matter. It is the ratio of a material's volume to its mass.

STEP 1: Convert Input(s) to Base Unit

Heat Capacity Ratio: 0.5 --> No Conversion Required
Pressure 1: 2.5 Bar --> 250000 Pascal (Check conversion here)
Specific Volume for Point 1: 1.64 Cubic Meter per Kilogram --> 1.64 Cubic Meter per Kilogram No Conversion Required
Pressure 2: 5.2 Bar --> 520000 Pascal (Check conversion here)
Specific Volume for Point 2: 0.816 Cubic Meter per Kilogram --> 0.816 Cubic Meter per Kilogram No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

w = (1/(C-1))*(P₁*v₁-P₂*v₂) --> (1/(0.5-1))*(250000*1.64-520000*0.816)

Evaluating ... ...

w = 28640

STEP 3: Convert Result to Output's Unit

28640 Joule -->28.64 Kilojoule (Check conversion here)

FINAL ANSWER

28.64 Kilojoule <-- Work Done

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Flow of Compressible Fluids » Basic Relationship of Thermodynamics » External Work Done by Gas in Adiabatic Process Introducing Pressure

Credits

Created by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has created this Calculator and 500+ more calculators!

Verified by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

< Basic Relationship of Thermodynamics Calculators

Mass Density given Absolute Pressure

LaTeX Go Mass Density of Gas = Absolute Pressure by Fluid Density/(Ideal Gas Constant*Absolute Temperature of Compressible Fluid)

Gas Constant given Absolute Pressure

LaTeX Go Ideal Gas Constant = Absolute Pressure by Fluid Density/(Mass Density of Gas*Absolute Temperature of Compressible Fluid)

Absolute Pressure given Absolute Temperature

LaTeX Go Absolute Pressure by Fluid Density = Mass Density of Gas*Ideal Gas Constant*Absolute Temperature of Compressible Fluid

Pressure given Constant

LaTeX Go Pressure of Compressible Flow = Gas Constant a/Specific Volume

External Work Done by Gas in Adiabatic Process Introducing Pressure Formula

LaTeX Go

Work Done = (1/(Heat Capacity Ratio-1))*(Pressure 1*Specific Volume for Point 1-Pressure 2*Specific Volume for Point 2)
w = (1/(C-1))*(P₁*v₁-P₂*v₂)

What is meant by Adiabatic Index?

Adiabatic Index is defined as the ratio of specific heat at constant pressure and that at constant volume.

How to Calculate External Work Done by Gas in Adiabatic Process Introducing Pressure?

External Work Done by Gas in Adiabatic Process Introducing Pressure calculator uses Work Done = (1/(Heat Capacity Ratio-1))*(Pressure 1*Specific Volume for Point 1-Pressure 2*Specific Volume for Point 2) to calculate the Work Done, The External Work Done by Gas in Adiabatic Process Introducing Pressure is transferring energy can be in method of force. This quantity of energy transferred by force to move object is termed as work done. Work Done is denoted by w symbol.

How to calculate External Work Done by Gas in Adiabatic Process Introducing Pressure using this online calculator? To use this online calculator for External Work Done by Gas in Adiabatic Process Introducing Pressure, enter Heat Capacity Ratio (C), Pressure 1 (P₁), Specific Volume for Point 1 (v₁), Pressure 2 (P₂) & Specific Volume for Point 2 (v₂) and hit the calculate button. Here is how the External Work Done by Gas in Adiabatic Process Introducing Pressure calculation can be explained with given input values -> 0.02864 = (1/(0.5-1))*(250000*1.64-520000*0.816).

FAQ

What is External Work Done by Gas in Adiabatic Process Introducing Pressure?

The External Work Done by Gas in Adiabatic Process Introducing Pressure is transferring energy can be in method of force. This quantity of energy transferred by force to move object is termed as work done and is represented as w = (1/(C-1))*(P₁*v₁-P₂*v₂) or Work Done = (1/(Heat Capacity Ratio-1))*(Pressure 1*Specific Volume for Point 1-Pressure 2*Specific Volume for Point 2). Heat Capacity Ratio is the ratio of specific heats of a substance at constant pressure and constant volume, Pressure 1 is the pressure at give point 1, Specific Volume for Point 1 is the number of cubic meters occupied by one kilogram of matter. It is the ratio of a material's volume to its mass, Pressure 2 is the pressure at give point 2 & Specific Volume for Point 2 is the number of cubic meters occupied by one kilogram of matter. It is the ratio of a material's volume to its mass.

How to calculate External Work Done by Gas in Adiabatic Process Introducing Pressure?

The External Work Done by Gas in Adiabatic Process Introducing Pressure is transferring energy can be in method of force. This quantity of energy transferred by force to move object is termed as work done is calculated using Work Done = (1/(Heat Capacity Ratio-1))*(Pressure 1*Specific Volume for Point 1-Pressure 2*Specific Volume for Point 2). To calculate External Work Done by Gas in Adiabatic Process Introducing Pressure, you need Heat Capacity Ratio (C), Pressure 1 (P₁), Specific Volume for Point 1 (v₁), Pressure 2 (P₂) & Specific Volume for Point 2 (v₂). With our tool, you need to enter the respective value for Heat Capacity Ratio, Pressure 1, Specific Volume for Point 1, Pressure 2 & Specific Volume for Point 2 and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Work Done?

In this formula, Work Done uses Heat Capacity Ratio, Pressure 1, Specific Volume for Point 1, Pressure 2 & Specific Volume for Point 2. We can use 1 other way(s) to calculate the same, which is/are as follows -

Work Done = Total Heat-Change in Internal Energy

Home

FREE PDFs

🔍 Search