Excess Temperature in Boiling Calculator

✖Surface Temperature is the temperature at or near a surface. Specifically, it may refer to as Surface air temperature, the temperature of the air near the surface of the earth.ⓘ Surface Temperature [T_surface]			+10% -10%
✖Saturation temperature is the temperature at which a given liquid and its vapour or a given solid and its vapour can co-exist in equilibrium, at a given pressure.ⓘ Saturation Temperature [T_Sat]			+10% -10%

✖Excess Temperature in Heat Transfer is defined as the temperature difference between heat source and saturation temperature of the fluid.ⓘ Excess Temperature in Boiling [T_excess]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Boiling Formulas PDF PDF Image

Excess Temperature in Boiling Solution

STEP 0: Pre-Calculation Summary

Formula Used

Excess Temperature in Heat Transfer = Surface Temperature-Saturation Temperature
T_excess = T_surface-T_Sat
This formula uses 3 Variables

Variables Used

Excess Temperature in Heat Transfer - (Measured in Kelvin) - Excess Temperature in Heat Transfer is defined as the temperature difference between heat source and saturation temperature of the fluid.
Surface Temperature - (Measured in Kelvin) - Surface Temperature is the temperature at or near a surface. Specifically, it may refer to as Surface air temperature, the temperature of the air near the surface of the earth.
Saturation Temperature - (Measured in Kelvin) - Saturation temperature is the temperature at which a given liquid and its vapour or a given solid and its vapour can co-exist in equilibrium, at a given pressure.

STEP 1: Convert Input(s) to Base Unit

Surface Temperature: 670 Kelvin --> 670 Kelvin No Conversion Required
Saturation Temperature: 373 Kelvin --> 373 Kelvin No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

T_excess = T_surface-T_Sat --> 670-373

Evaluating ... ...

T_excess = 297

STEP 3: Convert Result to Output's Unit

297 Kelvin --> No Conversion Required

FINAL ANSWER

297 Kelvin <-- Excess Temperature in Heat Transfer

(Calculation completed in 00.572 seconds)

You are here -

Home » Engineering » Chemical Engineering » Heat Transfer » Boiling and Condensation » Boiling » Excess Temperature in Boiling

Credits

Created by Ayush gupta

University School of Chemical Technology-USCT (GGSIPU), New Delhi

Ayush gupta has created this Calculator and 300+ more calculators!

Verified by Soupayan banerjee

National University of Judicial Science (NUJS), Kolkata

Soupayan banerjee has verified this Calculator and 900+ more calculators!

< Boiling Calculators

Critical Heat Flux by Zuber

LaTeX Go Critical Heat Flux = ((0.149*Enthalpy of Vaporization of Liquid*Density of Vapor)*(((Surface Tension*[g])*(Density of Liquid-Density of Vapor))/(Density of Vapor^2))^(1/4))

Correlation for Heat Flux proposed by Mostinski

LaTeX Go Heat Transfer Coefficient For Nucleate Boiling = 0.00341*(Critical Pressure^2.3)*(Excess Temperature in Nucleate Boiling^2.33)*(Reduced Pressure^0.566)

Heat Transfer Coefficient for Forced Convection Local Boiling Inside Vertical Tubes

LaTeX Go Heat Transfer Coefficient for Forced Convection = (2.54*((Excess Temperature)^3)*exp((System Pressure in Vertical Tubes)/1.551))

Excess Temperature in Boiling

LaTeX Go Excess Temperature in Heat Transfer = Surface Temperature-Saturation Temperature

Excess Temperature in Boiling Formula

LaTeX Go

Excess Temperature in Heat Transfer = Surface Temperature-Saturation Temperature
T_excess = T_surface-T_Sat

What is Heat Transfer?

Heat transfer is a discipline of thermal engineering that concerns the generation, use, conversion, and exchange of thermal energy between physical systems. Heat transfer is classified into various mechanisms, such as thermal conduction, thermal convection, thermal radiation, and transfer of energy by phase changes.

Define Thermal Conductivity & Factors affecting it?

Thermal conductivity is defined as the ability of a substance to conduct heat. Factors Affecting The Thermal Conductivity are: Moisture, Density of material, Pressure, Temperature & Structure of material.

How to Calculate Excess Temperature in Boiling?

Excess Temperature in Boiling calculator uses Excess Temperature in Heat Transfer = Surface Temperature-Saturation Temperature to calculate the Excess Temperature in Heat Transfer, The Excess Temperature in Boiling formula is defined as the difference between the surface temperature and saturated temperature. Excess Temperature in Heat Transfer is denoted by T_excess symbol.

How to calculate Excess Temperature in Boiling using this online calculator? To use this online calculator for Excess Temperature in Boiling, enter Surface Temperature (T_surface) & Saturation Temperature (T_Sat) and hit the calculate button. Here is how the Excess Temperature in Boiling calculation can be explained with given input values -> 297 = 670-373.

FAQ

What is Excess Temperature in Boiling?

The Excess Temperature in Boiling formula is defined as the difference between the surface temperature and saturated temperature and is represented as T_excess = T_surface-T_Sat or Excess Temperature in Heat Transfer = Surface Temperature-Saturation Temperature. Surface Temperature is the temperature at or near a surface. Specifically, it may refer to as Surface air temperature, the temperature of the air near the surface of the earth & Saturation temperature is the temperature at which a given liquid and its vapour or a given solid and its vapour can co-exist in equilibrium, at a given pressure.

How to calculate Excess Temperature in Boiling?

The Excess Temperature in Boiling formula is defined as the difference between the surface temperature and saturated temperature is calculated using Excess Temperature in Heat Transfer = Surface Temperature-Saturation Temperature. To calculate Excess Temperature in Boiling, you need Surface Temperature (T_surface) & Saturation Temperature (T_Sat). With our tool, you need to enter the respective value for Surface Temperature & Saturation Temperature and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search