Equivalent Dynamic Load for Singly Mounted Bearings when Fa by Fr is greater than 1.14 Calculator

✖Radial load acting on bearing is the amount of load onto the bearing acting radially.ⓘ Radial load acting on bearing [F_r]			+10% -10%
✖Axial or thrust load acting on bearing is the amount of thrust load onto the bearing acting axially.ⓘ Axial or thrust load acting on bearing [F_a]			+10% -10%

✖Equivalent dynamic load on singly bearing is a net dynamic load on a singly mounted bearing.ⓘ Equivalent Dynamic Load for Singly Mounted Bearings when Fa by Fr is greater than 1.14 [P_s]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Mechanical Formula PDF PDF Image

Equivalent Dynamic Load for Singly Mounted Bearings when Fa by Fr is greater than 1.14 Solution

STEP 0: Pre-Calculation Summary

Formula Used

Equivalent dynamic load on singly bearing = (0.35*Radial load acting on bearing)+(0.57*Axial or thrust load acting on bearing)
P_s = (0.35*F_r)+(0.57*F_a)
This formula uses 3 Variables

Variables Used

Equivalent dynamic load on singly bearing - (Measured in Newton) - Equivalent dynamic load on singly bearing is a net dynamic load on a singly mounted bearing.
Radial load acting on bearing - (Measured in Newton) - Radial load acting on bearing is the amount of load onto the bearing acting radially.
Axial or thrust load acting on bearing - (Measured in Newton) - Axial or thrust load acting on bearing is the amount of thrust load onto the bearing acting axially.

STEP 1: Convert Input(s) to Base Unit

Radial load acting on bearing: 8050 Newton --> 8050 Newton No Conversion Required
Axial or thrust load acting on bearing: 3000 Newton --> 3000 Newton No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P_s = (0.35*F_r)+(0.57*F_a) --> (0.35*8050)+(0.57*3000)

Evaluating ... ...

P_s = 4527.5

STEP 3: Convert Result to Output's Unit

4527.5 Newton --> No Conversion Required

FINAL ANSWER

4527.5 Newton <-- Equivalent dynamic load on singly bearing

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design of Rolling Contact Bearing » Angular Contact Bearing » Equivalent Dynamic Load for Singly Mounted Bearings when Fa by Fr is greater than 1.14

Credits

Created by Vaibhav Malani

National Institute of Technology (NIT), Tiruchirapalli

Vaibhav Malani has created this Calculator and 600+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Angular Contact Bearing Calculators

Equivalent Dynamic Load for Back to Back Bearings when Fa by Fr is greater than 1.14

LaTeX Go Equivalent dynamic load on back to back bearing = (0.57*Radial load acting on bearing)+(0.93*Axial or thrust load acting on bearing)

Equivalent Dynamic Load for Back to Back Bearings when Fa by Fr is less than or equal to 1.14

LaTeX Go Equivalent dynamic load on back to back bearing = Radial load acting on bearing+(0.55*Axial or thrust load acting on bearing)

Radial Load for Back to Back Bearings when Fa by Fr less than or equal to 1.14

LaTeX Go Radial load acting on bearing = (Equivalent dynamic load on bearing-(0.55*Axial or thrust load acting on bearing))

Axial Load for Back to Back Bearings when Fa by Fr is less than or equal to 1.14

LaTeX Go Axial or thrust load acting on bearing = (Equivalent dynamic load on bearing-Radial load acting on bearing)/0.55

Equivalent Dynamic Load for Singly Mounted Bearings when Fa by Fr is greater than 1.14 Formula

LaTeX Go

Equivalent dynamic load on singly bearing = (0.35*Radial load acting on bearing)+(0.57*Axial or thrust load acting on bearing)
P_s = (0.35*F_r)+(0.57*F_a)

What is angular contact bearing?

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.

How to Calculate Equivalent Dynamic Load for Singly Mounted Bearings when Fa by Fr is greater than 1.14?

Equivalent Dynamic Load for Singly Mounted Bearings when Fa by Fr is greater than 1.14 calculator uses Equivalent dynamic load on singly bearing = (0.35*Radial load acting on bearing)+(0.57*Axial or thrust load acting on bearing) to calculate the Equivalent dynamic load on singly bearing, Equivalent Dynamic Load for Singly Mounted Bearings when Fa by Fr is greater than 1.14 is the net effective dynamic load acting onto the bearings mounted singly or paired in tandem during operation when the ratio of the axial thrust load and the radial load acting onto the bearing is greater than 1.14. Equivalent dynamic load on singly bearing is denoted by P_s symbol.

How to calculate Equivalent Dynamic Load for Singly Mounted Bearings when Fa by Fr is greater than 1.14 using this online calculator? To use this online calculator for Equivalent Dynamic Load for Singly Mounted Bearings when Fa by Fr is greater than 1.14, enter Radial load acting on bearing (F_r) & Axial or thrust load acting on bearing (F_a) and hit the calculate button. Here is how the Equivalent Dynamic Load for Singly Mounted Bearings when Fa by Fr is greater than 1.14 calculation can be explained with given input values -> 4527.5 = (0.35*8050)+(0.57*3000).

FAQ

What is Equivalent Dynamic Load for Singly Mounted Bearings when Fa by Fr is greater than 1.14?

Equivalent Dynamic Load for Singly Mounted Bearings when Fa by Fr is greater than 1.14 is the net effective dynamic load acting onto the bearings mounted singly or paired in tandem during operation when the ratio of the axial thrust load and the radial load acting onto the bearing is greater than 1.14 and is represented as P_s = (0.35*F_r)+(0.57*F_a) or Equivalent dynamic load on singly bearing = (0.35*Radial load acting on bearing)+(0.57*Axial or thrust load acting on bearing). Radial load acting on bearing is the amount of load onto the bearing acting radially & Axial or thrust load acting on bearing is the amount of thrust load onto the bearing acting axially.

How to calculate Equivalent Dynamic Load for Singly Mounted Bearings when Fa by Fr is greater than 1.14?

Equivalent Dynamic Load for Singly Mounted Bearings when Fa by Fr is greater than 1.14 is the net effective dynamic load acting onto the bearings mounted singly or paired in tandem during operation when the ratio of the axial thrust load and the radial load acting onto the bearing is greater than 1.14 is calculated using Equivalent dynamic load on singly bearing = (0.35*Radial load acting on bearing)+(0.57*Axial or thrust load acting on bearing). To calculate Equivalent Dynamic Load for Singly Mounted Bearings when Fa by Fr is greater than 1.14, you need Radial load acting on bearing (F_r) & Axial or thrust load acting on bearing (F_a). With our tool, you need to enter the respective value for Radial load acting on bearing & Axial or thrust load acting on bearing and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search