Equivalent Dynamic Load for Back to Back Bearings when Fa by Fr is less than or equal to 1.14 Calculator

✖Radial load acting on bearing is the amount of load onto the bearing acting radially.ⓘ Radial Load Acting on Bearing [F_r]			+10% -10%
✖Axial or thrust load acting on bearing is the amount of thrust load onto the bearing acting axially.ⓘ Axial or Thrust Load Acting on Bearing [F_a]			+10% -10%

✖Equivalent dynamic load on back to back bearing is a net dynamic load on a back-to-back or face-to-face mounted bearing.ⓘ Equivalent Dynamic Load for Back to Back Bearings when Fa by Fr is less than or equal to 1.14 [P_b]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Design of Rolling Contact Bearing Formulas PDF PDF Image

Equivalent Dynamic Load for Back to Back Bearings when Fa by Fr is less than or equal to 1.14 Solution

STEP 0: Pre-Calculation Summary

Formula Used

Equivalent Dynamic Load on Back to Back Bearing = Radial Load Acting on Bearing+(0.55*Axial or Thrust Load Acting on Bearing)
P_b = F_r+(0.55*F_a)
This formula uses 3 Variables

Variables Used

Equivalent Dynamic Load on Back to Back Bearing - (Measured in Newton) - Equivalent dynamic load on back to back bearing is a net dynamic load on a back-to-back or face-to-face mounted bearing.
Radial Load Acting on Bearing - (Measured in Newton) - Radial load acting on bearing is the amount of load onto the bearing acting radially.
Axial or Thrust Load Acting on Bearing - (Measured in Newton) - Axial or thrust load acting on bearing is the amount of thrust load onto the bearing acting axially.

STEP 1: Convert Input(s) to Base Unit

Radial Load Acting on Bearing: 8050 Newton --> 8050 Newton No Conversion Required
Axial or Thrust Load Acting on Bearing: 3000 Newton --> 3000 Newton No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P_b = F_r+(0.55*F_a) --> 8050+(0.55*3000)

Evaluating ... ...

P_b = 9700

STEP 3: Convert Result to Output's Unit

9700 Newton --> No Conversion Required

FINAL ANSWER

9700 Newton <-- Equivalent Dynamic Load on Back to Back Bearing

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design of Rolling Contact Bearing » Angular Contact Bearing » Equivalent Dynamic Load for Back to Back Bearings when Fa by Fr is less than or equal to 1.14

Credits

Created by Vaibhav Malani

National Institute of Technology (NIT), Tiruchirapalli

Vaibhav Malani has created this Calculator and 600+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Angular Contact Bearing Calculators

Equivalent Dynamic Load for Back to Back Bearings when Fa by Fr is greater than 1.14

LaTeX Go Equivalent Dynamic Load on Back to Back Bearing = (0.57*Radial Load Acting on Bearing)+(0.93*Axial or Thrust Load Acting on Bearing)

Equivalent Dynamic Load for Back to Back Bearings when Fa by Fr is less than or equal to 1.14

LaTeX Go Equivalent Dynamic Load on Back to Back Bearing = Radial Load Acting on Bearing+(0.55*Axial or Thrust Load Acting on Bearing)

Radial Load for Back to Back Bearings when Fa by Fr less than or equal to 1.14

LaTeX Go Radial Load Acting on Bearing = (Equivalent Dynamic Load on Bearing-(0.55*Axial or Thrust Load Acting on Bearing))

Axial Load for Back to Back Bearings when Fa by Fr is less than or equal to 1.14

LaTeX Go Axial or Thrust Load Acting on Bearing = (Equivalent Dynamic Load on Bearing-Radial Load Acting on Bearing)/0.55

Equivalent Dynamic Load for Back to Back Bearings when Fa by Fr is less than or equal to 1.14 Formula

LaTeX Go

Equivalent Dynamic Load on Back to Back Bearing = Radial Load Acting on Bearing+(0.55*Axial or Thrust Load Acting on Bearing)
P_b = F_r+(0.55*F_a)

What is angular contact bearing?

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.

How to Calculate Equivalent Dynamic Load for Back to Back Bearings when Fa by Fr is less than or equal to 1.14?

Equivalent Dynamic Load for Back to Back Bearings when Fa by Fr is less than or equal to 1.14 calculator uses Equivalent Dynamic Load on Back to Back Bearing = Radial Load Acting on Bearing+(0.55*Axial or Thrust Load Acting on Bearing) to calculate the Equivalent Dynamic Load on Back to Back Bearing, Equivalent Dynamic Load for Back to Back Bearings when Fa by Fr is less than or equal to 1.14 is the net effective dynamic load acting onto the bearings pairs arranged back-to-back or face-to-face during operation when the ratio of the axial thrust load and the radial load acting onto the bearing is less than or equal to 1.14. Equivalent Dynamic Load on Back to Back Bearing is denoted by P_b symbol.

How to calculate Equivalent Dynamic Load for Back to Back Bearings when Fa by Fr is less than or equal to 1.14 using this online calculator? To use this online calculator for Equivalent Dynamic Load for Back to Back Bearings when Fa by Fr is less than or equal to 1.14, enter Radial Load Acting on Bearing (F_r) & Axial or Thrust Load Acting on Bearing (F_a) and hit the calculate button. Here is how the Equivalent Dynamic Load for Back to Back Bearings when Fa by Fr is less than or equal to 1.14 calculation can be explained with given input values -> 9700 = 8050+(0.55*3000).

FAQ

What is Equivalent Dynamic Load for Back to Back Bearings when Fa by Fr is less than or equal to 1.14?

Equivalent Dynamic Load for Back to Back Bearings when Fa by Fr is less than or equal to 1.14 is the net effective dynamic load acting onto the bearings pairs arranged back-to-back or face-to-face during operation when the ratio of the axial thrust load and the radial load acting onto the bearing is less than or equal to 1.14 and is represented as P_b = F_r+(0.55*F_a) or Equivalent Dynamic Load on Back to Back Bearing = Radial Load Acting on Bearing+(0.55*Axial or Thrust Load Acting on Bearing). Radial load acting on bearing is the amount of load onto the bearing acting radially & Axial or thrust load acting on bearing is the amount of thrust load onto the bearing acting axially.

How to calculate Equivalent Dynamic Load for Back to Back Bearings when Fa by Fr is less than or equal to 1.14?

Equivalent Dynamic Load for Back to Back Bearings when Fa by Fr is less than or equal to 1.14 is the net effective dynamic load acting onto the bearings pairs arranged back-to-back or face-to-face during operation when the ratio of the axial thrust load and the radial load acting onto the bearing is less than or equal to 1.14 is calculated using Equivalent Dynamic Load on Back to Back Bearing = Radial Load Acting on Bearing+(0.55*Axial or Thrust Load Acting on Bearing). To calculate Equivalent Dynamic Load for Back to Back Bearings when Fa by Fr is less than or equal to 1.14, you need Radial Load Acting on Bearing (F_r) & Axial or Thrust Load Acting on Bearing (F_a). With our tool, you need to enter the respective value for Radial Load Acting on Bearing & Axial or Thrust Load Acting on Bearing and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Equivalent Dynamic Load on Back to Back Bearing?

In this formula, Equivalent Dynamic Load on Back to Back Bearing uses Radial Load Acting on Bearing & Axial or Thrust Load Acting on Bearing. We can use 1 other way(s) to calculate the same, which is/are as follows -

Equivalent Dynamic Load on Back to Back Bearing = (0.57*Radial Load Acting on Bearing)+(0.93*Axial or Thrust Load Acting on Bearing)

Home

FREE PDFs

🔍 Search