Equation for Water Level Fluctuation Solution

STEP 0: Pre-Calculation Summary
Formula Used
Water Level Fluctuation = (Gross Recharge due to Rainfall-Gross Water Draft-Base Flow into the Stream from the Area+Recharge of Ground Water Body+Net Ground Water Flowing Outside Catchment)/(Watershed Area*Specific Yield)
h = (RG-DG-B+Is+I)/(A*SY)
This formula uses 8 Variables
Variables Used
Water Level Fluctuation - (Measured in Meter) - The Water Level Fluctuation refers to the irregular rising and falling in number or amount of water during monsoon season.
Gross Recharge due to Rainfall - (Measured in Cubic Meter per Second) - The Gross Recharge due to Rainfall refers to the total amount of water that infiltrates the ground as a result of precipitation.
Gross Water Draft - (Measured in Cubic Meter per Second) - The Gross Water Draft refers to the total volume of water extracted or utilized from a catchment area.
Base Flow into the Stream from the Area - (Measured in Cubic Meter per Second) - The Base Flow into the Stream from the Area refers to the flow that is not runoff, it is water from the ground, flowing into the channel over a long time and with a certain delay.
Recharge of Ground Water Body - (Measured in Cubic Meter per Second) - The Recharge of Ground Water Body from the stream refers to the hydrologic process, where water moves downward from surface water to groundwater.
Net Ground Water Flowing Outside Catchment - (Measured in Cubic Meter per Second) - The Net Ground Water Flowing Outside Catchment refers to the steady-state groundwater flow through aquifers.
Watershed Area - (Measured in Square Meter) - The Watershed Area refers to the isolated area with a well demarcated boundary line, draining the rainwater to a single outlet.
Specific Yield - The Specific Yield refers to the volume of water that a saturated rock or soil will yield due to gravity drainage to the total volume of the rock or soil.
STEP 1: Convert Input(s) to Base Unit
Gross Recharge due to Rainfall: 45 Cubic Meter per Second --> 45 Cubic Meter per Second No Conversion Required
Gross Water Draft: 10 Cubic Meter per Second --> 10 Cubic Meter per Second No Conversion Required
Base Flow into the Stream from the Area: 6 Cubic Meter per Second --> 6 Cubic Meter per Second No Conversion Required
Recharge of Ground Water Body: 18 Cubic Meter per Second --> 18 Cubic Meter per Second No Conversion Required
Net Ground Water Flowing Outside Catchment: 12 Cubic Meter per Second --> 12 Cubic Meter per Second No Conversion Required
Watershed Area: 20 Square Meter --> 20 Square Meter No Conversion Required
Specific Yield: 0.59 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
h = (RG-DG-B+Is+I)/(A*SY) --> (45-10-6+18+12)/(20*0.59)
Evaluating ... ...
h = 5
STEP 3: Convert Result to Output's Unit
5 Meter --> No Conversion Required
FINAL ANSWER
5 Meter <-- Water Level Fluctuation
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has created this Calculator and 2000+ more calculators!
Verifier Image
Verified by Chandana P Dev
NSS College of Engineering (NSSCE), Palakkad
Chandana P Dev has verified this Calculator and 1700+ more calculators!

Groundwater Level Fluctuation Calculators

Equation for Specific Yield
​ LaTeX ​ Go Specific Yield = (Gross Recharge due to Rainfall-Gross Water Draft-Base Flow into the Stream from the Area+Recharge of Ground Water Body+Net Ground Water Flowing Outside Catchment)/(Watershed Area*Water Level Fluctuation)
Equation for Gross Recharge due to Rainfall and other Sources
​ LaTeX ​ Go Gross Recharge due to Rainfall = (Water Level Fluctuation*Specific Yield*Watershed Area)+Gross Water Draft+Base Flow into the Stream from the Area-Recharge of Ground Water Body-Net Ground Water Flowing Outside Catchment
Equation for Base Flow into Stream from Area
​ LaTeX ​ Go Base Flow into the Stream from the Area = Gross Recharge due to Rainfall-Gross Water Draft+Recharge of Ground Water Body+Net Ground Water Flowing Outside Catchment-(Water Level Fluctuation*Specific Yield*Watershed Area)
Equation for Gross Water Draft
​ LaTeX ​ Go Gross Water Draft = Gross Recharge due to Rainfall-Base Flow into the Stream from the Area+Recharge of Ground Water Body+Net Ground Water Flowing Outside Catchment-(Water Level Fluctuation*Specific Yield*Watershed Area)

Equation for Water Level Fluctuation Formula

​LaTeX ​Go
Water Level Fluctuation = (Gross Recharge due to Rainfall-Gross Water Draft-Base Flow into the Stream from the Area+Recharge of Ground Water Body+Net Ground Water Flowing Outside Catchment)/(Watershed Area*Specific Yield)
h = (RG-DG-B+Is+I)/(A*SY)

What is Discharge?

Discharge is the volumetric flow rate of water that is transported through a given cross-sectional area. It includes any suspended solids, dissolved chemicals, or biologic material in addition to the water itself.

How to Calculate Equation for Water Level Fluctuation?

Equation for Water Level Fluctuation calculator uses Water Level Fluctuation = (Gross Recharge due to Rainfall-Gross Water Draft-Base Flow into the Stream from the Area+Recharge of Ground Water Body+Net Ground Water Flowing Outside Catchment)/(Watershed Area*Specific Yield) to calculate the Water Level Fluctuation, The Equation for Water Level Fluctuation formula is defined as the difference in water accumulation by comparison during a monsoon season. Water Level Fluctuation is denoted by h symbol.

How to calculate Equation for Water Level Fluctuation using this online calculator? To use this online calculator for Equation for Water Level Fluctuation, enter Gross Recharge due to Rainfall (RG), Gross Water Draft (DG), Base Flow into the Stream from the Area (B), Recharge of Ground Water Body (Is), Net Ground Water Flowing Outside Catchment (I), Watershed Area (A) & Specific Yield (SY) and hit the calculate button. Here is how the Equation for Water Level Fluctuation calculation can be explained with given input values -> 5 = (45-10-6+18+12)/(20*0.59).

FAQ

What is Equation for Water Level Fluctuation?
The Equation for Water Level Fluctuation formula is defined as the difference in water accumulation by comparison during a monsoon season and is represented as h = (RG-DG-B+Is+I)/(A*SY) or Water Level Fluctuation = (Gross Recharge due to Rainfall-Gross Water Draft-Base Flow into the Stream from the Area+Recharge of Ground Water Body+Net Ground Water Flowing Outside Catchment)/(Watershed Area*Specific Yield). The Gross Recharge due to Rainfall refers to the total amount of water that infiltrates the ground as a result of precipitation, The Gross Water Draft refers to the total volume of water extracted or utilized from a catchment area, The Base Flow into the Stream from the Area refers to the flow that is not runoff, it is water from the ground, flowing into the channel over a long time and with a certain delay, The Recharge of Ground Water Body from the stream refers to the hydrologic process, where water moves downward from surface water to groundwater, The Net Ground Water Flowing Outside Catchment refers to the steady-state groundwater flow through aquifers, The Watershed Area refers to the isolated area with a well demarcated boundary line, draining the rainwater to a single outlet & The Specific Yield refers to the volume of water that a saturated rock or soil will yield due to gravity drainage to the total volume of the rock or soil.
How to calculate Equation for Water Level Fluctuation?
The Equation for Water Level Fluctuation formula is defined as the difference in water accumulation by comparison during a monsoon season is calculated using Water Level Fluctuation = (Gross Recharge due to Rainfall-Gross Water Draft-Base Flow into the Stream from the Area+Recharge of Ground Water Body+Net Ground Water Flowing Outside Catchment)/(Watershed Area*Specific Yield). To calculate Equation for Water Level Fluctuation, you need Gross Recharge due to Rainfall (RG), Gross Water Draft (DG), Base Flow into the Stream from the Area (B), Recharge of Ground Water Body (Is), Net Ground Water Flowing Outside Catchment (I), Watershed Area (A) & Specific Yield (SY). With our tool, you need to enter the respective value for Gross Recharge due to Rainfall, Gross Water Draft, Base Flow into the Stream from the Area, Recharge of Ground Water Body, Net Ground Water Flowing Outside Catchment, Watershed Area & Specific Yield and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Water Level Fluctuation?
In this formula, Water Level Fluctuation uses Gross Recharge due to Rainfall, Gross Water Draft, Base Flow into the Stream from the Area, Recharge of Ground Water Body, Net Ground Water Flowing Outside Catchment, Watershed Area & Specific Yield. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Water Level Fluctuation = (Possible Recharge+Gross Water Draft)/(Specific Yield*Watershed Area)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!