Equation for Recharge from Tanks and Ponds Calculator

✖The Possible Recharge refers to the gross recharge minus the natural recharge of the area.ⓘ Possible Recharge [R]			+10% -10%
✖The Recharge from Rainfall refers to the process by which precipitation replenishes the groundwater supply.ⓘ Recharge from Rainfall [R_rf]			+10% -10%
✖The Recharge from Irrigation refers to the process of replenishing groundwater through deliberate human actions related to irrigation practices.ⓘ Recharge from Irrigation [R_gw]			+10% -10%
✖The Recharge from Conservation Structures refers to the practice of intentionally increasing the amount of water that enters an aquifer through human-controlled means.ⓘ Recharge from Conservation Structures [R_wt]			+10% -10%

✖The Recharge from Tanks and Ponds refers to a method of replenishing groundwater by directing water into the ground from surface storage structures.ⓘ Equation for Recharge from Tanks and Ponds [R_t]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Groundwater Level Fluctuation Formulas PDF PDF Image

Equation for Recharge from Tanks and Ponds Solution

STEP 0: Pre-Calculation Summary

Formula Used

Recharge from Tanks and Ponds = Possible Recharge-Recharge from Rainfall-Recharge from Irrigation-Recharge from Conservation Structures
R_t = R-R_rf-R_gw-R_wt
This formula uses 5 Variables

Variables Used

Recharge from Tanks and Ponds - (Measured in Cubic Meter per Second) - The Recharge from Tanks and Ponds refers to a method of replenishing groundwater by directing water into the ground from surface storage structures.
Possible Recharge - (Measured in Cubic Meter per Second) - The Possible Recharge refers to the gross recharge minus the natural recharge of the area.
Recharge from Rainfall - (Measured in Cubic Meter per Second) - The Recharge from Rainfall refers to the process by which precipitation replenishes the groundwater supply.
Recharge from Irrigation - (Measured in Cubic Meter per Second) - The Recharge from Irrigation refers to the process of replenishing groundwater through deliberate human actions related to irrigation practices.
Recharge from Conservation Structures - (Measured in Cubic Meter per Second) - The Recharge from Conservation Structures refers to the practice of intentionally increasing the amount of water that enters an aquifer through human-controlled means.

STEP 1: Convert Input(s) to Base Unit

Possible Recharge: 70 Cubic Meter per Second --> 70 Cubic Meter per Second No Conversion Required
Recharge from Rainfall: 16 Cubic Meter per Second --> 16 Cubic Meter per Second No Conversion Required
Recharge from Irrigation: 19 Cubic Meter per Second --> 19 Cubic Meter per Second No Conversion Required
Recharge from Conservation Structures: 21 Cubic Meter per Second --> 21 Cubic Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

R_t = R-R_rf-R_gw-R_wt --> 70-16-19-21

Evaluating ... ...

R_t = 14

STEP 3: Convert Result to Output's Unit

14 Cubic Meter per Second --> No Conversion Required

FINAL ANSWER

14 Cubic Meter per Second <-- Recharge from Tanks and Ponds

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Groundwater Hydrology » Recharge » Estimation of Recharge » Groundwater Level Fluctuation » Equation for Recharge from Tanks and Ponds

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Groundwater Level Fluctuation Calculators

Equation for Specific Yield

LaTeX Go Specific Yield = (Gross Recharge due to Rainfall-Gross Water Draft-Base Flow into the Stream from the Area+Recharge of Ground Water Body+Net Ground Water Flowing Outside Catchment)/(Watershed Area*Water Level Fluctuation)

Equation for Gross Recharge due to Rainfall and other Sources

LaTeX Go Gross Recharge due to Rainfall = (Water Level Fluctuation*Specific Yield*Watershed Area)+Gross Water Draft+Base Flow into the Stream from the Area-Recharge of Ground Water Body-Net Ground Water Flowing Outside Catchment

Equation for Base Flow into Stream from Area

LaTeX Go Base Flow into the Stream from the Area = Gross Recharge due to Rainfall-Gross Water Draft+Recharge of Ground Water Body+Net Ground Water Flowing Outside Catchment-(Water Level Fluctuation*Specific Yield*Watershed Area)

Equation for Gross Water Draft

LaTeX Go Gross Water Draft = Gross Recharge due to Rainfall-Base Flow into the Stream from the Area+Recharge of Ground Water Body+Net Ground Water Flowing Outside Catchment-(Water Level Fluctuation*Specific Yield*Watershed Area)

Equation for Recharge from Tanks and Ponds Formula

LaTeX Go

Recharge from Tanks and Ponds = Possible Recharge-Recharge from Rainfall-Recharge from Irrigation-Recharge from Conservation Structures
R_t = R-R_rf-R_gw-R_wt

What is Groundwater Flow?

Groundwater flow is defined as the part of streamflow that has infiltrated the ground, entered the phreatic zone, and has been discharged into a stream channel or springs, and seepage water. It is governed by the groundwater flow equation.

How to Calculate Equation for Recharge from Tanks and Ponds?

Equation for Recharge from Tanks and Ponds calculator uses Recharge from Tanks and Ponds = Possible Recharge-Recharge from Rainfall-Recharge from Irrigation-Recharge from Conservation Structures to calculate the Recharge from Tanks and Ponds, The Equation for Recharge from Tanks and Ponds formula is defined as the hydrologic process, where water moves downward from artificial sources to groundwater. Recharge from Tanks and Ponds is denoted by R_t symbol.

How to calculate Equation for Recharge from Tanks and Ponds using this online calculator? To use this online calculator for Equation for Recharge from Tanks and Ponds, enter Possible Recharge (R), Recharge from Rainfall (R_rf), Recharge from Irrigation (R_gw) & Recharge from Conservation Structures (R_wt) and hit the calculate button. Here is how the Equation for Recharge from Tanks and Ponds calculation can be explained with given input values -> 14 = 70-16-19-21.

FAQ

What is Equation for Recharge from Tanks and Ponds?

The Equation for Recharge from Tanks and Ponds formula is defined as the hydrologic process, where water moves downward from artificial sources to groundwater and is represented as R_t = R-R_rf-R_gw-R_wt or Recharge from Tanks and Ponds = Possible Recharge-Recharge from Rainfall-Recharge from Irrigation-Recharge from Conservation Structures. The Possible Recharge refers to the gross recharge minus the natural recharge of the area, The Recharge from Rainfall refers to the process by which precipitation replenishes the groundwater supply, The Recharge from Irrigation refers to the process of replenishing groundwater through deliberate human actions related to irrigation practices & The Recharge from Conservation Structures refers to the practice of intentionally increasing the amount of water that enters an aquifer through human-controlled means.

How to calculate Equation for Recharge from Tanks and Ponds?

The Equation for Recharge from Tanks and Ponds formula is defined as the hydrologic process, where water moves downward from artificial sources to groundwater is calculated using Recharge from Tanks and Ponds = Possible Recharge-Recharge from Rainfall-Recharge from Irrigation-Recharge from Conservation Structures. To calculate Equation for Recharge from Tanks and Ponds, you need Possible Recharge (R), Recharge from Rainfall (R_rf), Recharge from Irrigation (R_gw) & Recharge from Conservation Structures (R_wt). With our tool, you need to enter the respective value for Possible Recharge, Recharge from Rainfall, Recharge from Irrigation & Recharge from Conservation Structures and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search