Equation for Recharge from Irrigation in Area Calculator

✖The Possible Recharge refers to the gross recharge minus the natural recharge of the area.ⓘ Possible Recharge [R]			+10% -10%
✖The Recharge from Rainfall refers to the process by which precipitation replenishes the groundwater supply.ⓘ Recharge from Rainfall [R_rf]			+10% -10%
✖The Recharge from Conservation Structures refers to the practice of intentionally increasing the amount of water that enters an aquifer through human-controlled means.ⓘ Recharge from Conservation Structures [R_wt]			+10% -10%
✖The Recharge from Tanks and Ponds refers to a method of replenishing groundwater by directing water into the ground from surface storage structures.ⓘ Recharge from Tanks and Ponds [R_t]			+10% -10%

✖The Recharge from Irrigation refers to the process of replenishing groundwater through deliberate human actions related to irrigation practices.ⓘ Equation for Recharge from Irrigation in Area [R_gw]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Groundwater Level Fluctuation Formulas PDF PDF Image

Equation for Recharge from Irrigation in Area Solution

STEP 0: Pre-Calculation Summary

Formula Used

Recharge from Irrigation = Possible Recharge-Recharge from Rainfall-Recharge from Conservation Structures-Recharge from Tanks and Ponds
R_gw = R-R_rf-R_wt-R_t
This formula uses 5 Variables

Variables Used

Recharge from Irrigation - (Measured in Cubic Meter per Second) - The Recharge from Irrigation refers to the process of replenishing groundwater through deliberate human actions related to irrigation practices.
Possible Recharge - (Measured in Cubic Meter per Second) - The Possible Recharge refers to the gross recharge minus the natural recharge of the area.
Recharge from Rainfall - (Measured in Cubic Meter per Second) - The Recharge from Rainfall refers to the process by which precipitation replenishes the groundwater supply.
Recharge from Conservation Structures - (Measured in Cubic Meter per Second) - The Recharge from Conservation Structures refers to the practice of intentionally increasing the amount of water that enters an aquifer through human-controlled means.
Recharge from Tanks and Ponds - (Measured in Cubic Meter per Second) - The Recharge from Tanks and Ponds refers to a method of replenishing groundwater by directing water into the ground from surface storage structures.

STEP 1: Convert Input(s) to Base Unit

Possible Recharge: 70 Cubic Meter per Second --> 70 Cubic Meter per Second No Conversion Required
Recharge from Rainfall: 16 Cubic Meter per Second --> 16 Cubic Meter per Second No Conversion Required
Recharge from Conservation Structures: 21 Cubic Meter per Second --> 21 Cubic Meter per Second No Conversion Required
Recharge from Tanks and Ponds: 14 Cubic Meter per Second --> 14 Cubic Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

R_gw = R-R_rf-R_wt-R_t --> 70-16-21-14

Evaluating ... ...

R_gw = 19

STEP 3: Convert Result to Output's Unit

19 Cubic Meter per Second --> No Conversion Required

FINAL ANSWER

19 Cubic Meter per Second <-- Recharge from Irrigation

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Groundwater Hydrology » Recharge » Estimation of Recharge » Groundwater Level Fluctuation » Equation for Recharge from Irrigation in Area

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Groundwater Level Fluctuation Calculators

Equation for Specific Yield

LaTeX Go Specific Yield = (Gross Recharge due to Rainfall-Gross Water Draft-Base Flow into the Stream from the Area+Recharge of Ground Water Body+Net Ground Water Flowing Outside Catchment)/(Watershed Area*Water Level Fluctuation)

Equation for Gross Recharge due to Rainfall and other Sources

LaTeX Go Gross Recharge due to Rainfall = (Water Level Fluctuation*Specific Yield*Watershed Area)+Gross Water Draft+Base Flow into the Stream from the Area-Recharge of Ground Water Body-Net Ground Water Flowing Outside Catchment

Equation for Base Flow into Stream from Area

LaTeX Go Base Flow into the Stream from the Area = Gross Recharge due to Rainfall-Gross Water Draft+Recharge of Ground Water Body+Net Ground Water Flowing Outside Catchment-(Water Level Fluctuation*Specific Yield*Watershed Area)

Equation for Gross Water Draft

LaTeX Go Gross Water Draft = Gross Recharge due to Rainfall-Base Flow into the Stream from the Area+Recharge of Ground Water Body+Net Ground Water Flowing Outside Catchment-(Water Level Fluctuation*Specific Yield*Watershed Area)

Equation for Recharge from Irrigation in Area Formula

LaTeX Go

Recharge from Irrigation = Possible Recharge-Recharge from Rainfall-Recharge from Conservation Structures-Recharge from Tanks and Ponds
R_gw = R-R_rf-R_wt-R_t

What is Groundwater Flow?

Groundwater Flow is defined as the part of streamflow that has infiltrated the ground, entered the phreatic zone, and has been discharged into a stream channel or springs, and seepage water.

How to Calculate Equation for Recharge from Irrigation in Area?

Equation for Recharge from Irrigation in Area calculator uses Recharge from Irrigation = Possible Recharge-Recharge from Rainfall-Recharge from Conservation Structures-Recharge from Tanks and Ponds to calculate the Recharge from Irrigation, The Equation for Recharge from Irrigation in Area formula is defined as hydrologic process, which includes both surface and groundwater sources where water moves downward from surface water to groundwater. Recharge from Irrigation is denoted by R_gw symbol.

How to calculate Equation for Recharge from Irrigation in Area using this online calculator? To use this online calculator for Equation for Recharge from Irrigation in Area, enter Possible Recharge (R), Recharge from Rainfall (R_rf), Recharge from Conservation Structures (R_wt) & Recharge from Tanks and Ponds (R_t) and hit the calculate button. Here is how the Equation for Recharge from Irrigation in Area calculation can be explained with given input values -> 19 = 70-16-21-14.

FAQ

What is Equation for Recharge from Irrigation in Area?

The Equation for Recharge from Irrigation in Area formula is defined as hydrologic process, which includes both surface and groundwater sources where water moves downward from surface water to groundwater and is represented as R_gw = R-R_rf-R_wt-R_t or Recharge from Irrigation = Possible Recharge-Recharge from Rainfall-Recharge from Conservation Structures-Recharge from Tanks and Ponds. The Possible Recharge refers to the gross recharge minus the natural recharge of the area, The Recharge from Rainfall refers to the process by which precipitation replenishes the groundwater supply, The Recharge from Conservation Structures refers to the practice of intentionally increasing the amount of water that enters an aquifer through human-controlled means & The Recharge from Tanks and Ponds refers to a method of replenishing groundwater by directing water into the ground from surface storage structures.

How to calculate Equation for Recharge from Irrigation in Area?

The Equation for Recharge from Irrigation in Area formula is defined as hydrologic process, which includes both surface and groundwater sources where water moves downward from surface water to groundwater is calculated using Recharge from Irrigation = Possible Recharge-Recharge from Rainfall-Recharge from Conservation Structures-Recharge from Tanks and Ponds. To calculate Equation for Recharge from Irrigation in Area, you need Possible Recharge (R), Recharge from Rainfall (R_rf), Recharge from Conservation Structures (R_wt) & Recharge from Tanks and Ponds (R_t). With our tool, you need to enter the respective value for Possible Recharge, Recharge from Rainfall, Recharge from Conservation Structures & Recharge from Tanks and Ponds and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search