Deviation Angle Given Length of Valley Curve Less than Stopping Sight Distance Calculator

✖Driver Sight Height refers to the vertical distance between the driver's eye level and the road surface while seated in a vehicle.ⓘ Driver Sight Height [h₁]			+10% -10%
✖Sight Distance is s the minimum distance between two vehicles moving along a curve, when the driver of one vehicle can just see the other vehicle on the road.ⓘ Sight Distance [S]			+10% -10%
✖Inclination refers to the angle or slope of an object or surface concerning the horizontal plane.ⓘ Inclination [α_angle]			+10% -10%
✖Length of Curve is the distance along the road where the alignment changes from upward to downward slope, creating a valley-shaped concave.ⓘ Length of Curve [L_s]			+10% -10%

✖Deviation Angle is the angle between the reference direction and the observed direction.ⓘ Deviation Angle Given Length of Valley Curve Less than Stopping Sight Distance [N]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Length of Valley Curve Formulas PDF PDF Image

Deviation Angle Given Length of Valley Curve Less than Stopping Sight Distance Solution

STEP 0: Pre-Calculation Summary

Formula Used

Deviation Angle = (2*Driver Sight Height+(2*Sight Distance*tan(Inclination)))/(2*Sight Distance-Length of Curve)
N = (2*h₁+(2*S*tan(α_angle)))/(2*S-L_s)
This formula uses 1 Functions, 5 Variables

Functions Used

tan - The tangent of an angle is a trigonometric ratio of the length of the side opposite an angle to the length of the side adjacent to an angle in a right triangle., tan(Angle)

Variables Used

Deviation Angle - (Measured in Radian) - Deviation Angle is the angle between the reference direction and the observed direction.
Driver Sight Height - (Measured in Meter) - Driver Sight Height refers to the vertical distance between the driver's eye level and the road surface while seated in a vehicle.
Sight Distance - (Measured in Meter) - Sight Distance is s the minimum distance between two vehicles moving along a curve, when the driver of one vehicle can just see the other vehicle on the road.
Inclination - (Measured in Radian) - Inclination refers to the angle or slope of an object or surface concerning the horizontal plane.
Length of Curve - (Measured in Meter) - Length of Curve is the distance along the road where the alignment changes from upward to downward slope, creating a valley-shaped concave.

STEP 1: Convert Input(s) to Base Unit

Driver Sight Height: 0.123396 Meter --> 0.123396 Meter No Conversion Required
Sight Distance: 3.56 Meter --> 3.56 Meter No Conversion Required
Inclination: 2 Degree --> 0.03490658503988 Radian (Check conversion here)
Length of Curve: 7 Meter --> 7 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

N = (2*h₁+(2*S*tan(α_angle)))/(2*S-L_s) --> (2*0.123396+(2*3.56*tan(0.03490658503988)))/(2*3.56-7)

Evaluating ... ...

N = 4.12856565650997

STEP 3: Convert Result to Output's Unit

4.12856565650997 Radian -->236.549387560724 Degree (Check conversion here)

FINAL ANSWER

236.549387560724 ≈ 236.5494 Degree <-- Deviation Angle

(Calculation completed in 00.066 seconds)

You are here -

Home » Physics » Transportation System » Vertical alignment » Length of Valley Curve » Mechanical » Length of Valley Curve Less than Stopping Sight Distance » Deviation Angle Given Length of Valley Curve Less than Stopping Sight Distance

Credits

Created by Rahul

Dayanada Sagar college of Engineering (DSCE), banglore

Rahul has created this Calculator and 50+ more calculators!

Verified by Kartikay Pandit

National Institute Of Technology (NIT), Hamirpur

Kartikay Pandit has verified this Calculator and 400+ more calculators!

< Length of Valley Curve Less than Stopping Sight Distance Calculators

Inclination Angle given Length of Valley Curve Less than Stopping Sight Distance

LaTeX Go Inclination = atan((Deviation Angle*(2*Sight Distance-Length of Curve)-(2*Driver Sight Height))/(2*Sight Distance))

Driver Sight Height given Length of Valley Curve Less than Stopping Sight Distance

LaTeX Go Driver Sight Height = (Deviation Angle*(2*Sight Distance-Length of Curve)-(2*Sight Distance*tan(Inclination)))/2

Deviation Angle Given Length of Valley Curve Less than Stopping Sight Distance

LaTeX Go Deviation Angle = (2*Driver Sight Height+(2*Sight Distance*tan(Inclination)))/(2*Sight Distance-Length of Curve)

Length of Valley Curve Less than Stopping Sight Distance

LaTeX Go Length of Curve = 2*Sight Distance-(2*Driver Sight Height+(2*Sight Distance*tan(Inclination)))/(Deviation Angle)

Deviation Angle Given Length of Valley Curve Less than Stopping Sight Distance Formula

LaTeX Go

Deviation Angle = (2*Driver Sight Height+(2*Sight Distance*tan(Inclination)))/(2*Sight Distance-Length of Curve)
N = (2*h₁+(2*S*tan(α_angle)))/(2*S-L_s)

Length of Valley Curve Less than Stopping Sight Distance

The "Length of Valley Curve Less than Stopping Sight Distance" refers to the segment of a road that forms a downward slope or depression (valley) and is shorter than the stopping sight distance required for safe driving. This length indicates a section where the road curvature is such that a driver can see the road ahead within a distance that is less than the stopping sight distance, potentially posing a visibility challenge and requiring caution.

How to Calculate Deviation Angle Given Length of Valley Curve Less than Stopping Sight Distance?

Deviation Angle Given Length of Valley Curve Less than Stopping Sight Distance calculator uses Deviation Angle = (2*Driver Sight Height+(2*Sight Distance*tan(Inclination)))/(2*Sight Distance-Length of Curve) to calculate the Deviation Angle, The Deviation Angle Given Length of Valley Curve Less than Stopping Sight Distance formula is defined as 2 times the sight distance, minus 2 times the driver's eye height, plus 2 times the sight distance multiplied by the tangent of the inclination angle, all divided by the length of the curve. Deviation Angle is denoted by N symbol.

How to calculate Deviation Angle Given Length of Valley Curve Less than Stopping Sight Distance using this online calculator? To use this online calculator for Deviation Angle Given Length of Valley Curve Less than Stopping Sight Distance, enter Driver Sight Height (h₁), Sight Distance (S), Inclination (α_angle) & Length of Curve (L_s) and hit the calculate button. Here is how the Deviation Angle Given Length of Valley Curve Less than Stopping Sight Distance calculation can be explained with given input values -> 13553.28 = (2*0.123396+(2*3.56*tan(0.03490658503988)))/(2*3.56-7).

FAQ

What is Deviation Angle Given Length of Valley Curve Less than Stopping Sight Distance?

The Deviation Angle Given Length of Valley Curve Less than Stopping Sight Distance formula is defined as 2 times the sight distance, minus 2 times the driver's eye height, plus 2 times the sight distance multiplied by the tangent of the inclination angle, all divided by the length of the curve and is represented as N = (2*h₁+(2*S*tan(α_angle)))/(2*S-L_s) or Deviation Angle = (2*Driver Sight Height+(2*Sight Distance*tan(Inclination)))/(2*Sight Distance-Length of Curve). Driver Sight Height refers to the vertical distance between the driver's eye level and the road surface while seated in a vehicle, Sight Distance is s the minimum distance between two vehicles moving along a curve, when the driver of one vehicle can just see the other vehicle on the road, Inclination refers to the angle or slope of an object or surface concerning the horizontal plane & Length of Curve is the distance along the road where the alignment changes from upward to downward slope, creating a valley-shaped concave.

How to calculate Deviation Angle Given Length of Valley Curve Less than Stopping Sight Distance?

The Deviation Angle Given Length of Valley Curve Less than Stopping Sight Distance formula is defined as 2 times the sight distance, minus 2 times the driver's eye height, plus 2 times the sight distance multiplied by the tangent of the inclination angle, all divided by the length of the curve is calculated using Deviation Angle = (2*Driver Sight Height+(2*Sight Distance*tan(Inclination)))/(2*Sight Distance-Length of Curve). To calculate Deviation Angle Given Length of Valley Curve Less than Stopping Sight Distance, you need Driver Sight Height (h₁), Sight Distance (S), Inclination (α_angle) & Length of Curve (L_s). With our tool, you need to enter the respective value for Driver Sight Height, Sight Distance, Inclination & Length of Curve and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search